Fan-surface dynamics and biogenic calcrete development: Interactions during ultimate phases of fan evolution in the semiarid SE Spain (Murcia) Ana M. Alonso-Zarza a.*, Pablo G. Silva b, Jose L. Goy c , Cari Zazo d a Departamento de Petrologfa y Geoqufmica, Facultad Ciencias Geologicas, Universidad Complutense de Madrid, 28040 Madrid, Spain b Departamento de Geologfa, Uniuersidad de Salamanca, Escuela Uniuersitaria Politecnica de Auila, 05003 Auila, Spain C Departamento de Geologfa, Facultad de Ciencias, Uniuersidad de Salamanca, 37008 Salamanca, Spain d Departamento de Geologla, Museo Nacional de Ciencias Naturales (CSlC), Gutierrez Abascal, 2, 28006 Madrid, Spain Abstract Pleistocene alluvial fan surfaces of the Campo de Cartagena-Mar Menor Basin (Murcia, SE Spain) are capped by thick mature calcretes. Calcrete profiles consist mainly of six different horizons: prismatic, chalky, nodular, massive, laminar and coated-gravels. Petrographic study of the calcretes has shown the occurrence of features such as alveolar septal structures, calcified filaments, coated grains, spherulites, calcified root cells and calcispheres that indicate the biogenic origin of the calcretes, mainly induced by plant root related microbial activity. The calcretes studied were formed initially in the soil and represented the K horizon. Development of the calcrete profiles took place in six main stages and was driven by multiple phases of soil formation, erosion and reworking. The relationships between these processes caused the formation of different calcrete profiles in proximal and distal fan areas. In the distal areas, which are controlled by limited distal fan aggradation, episodic sediment input, buried previously developed calcretes and generated new space for calcrete growth by plants growing in the overlying unconsolidated materials. This allowed the renewal of calcrete formation and it led to the development of complex composite profiles which are thicker than in proximal areas, where surface stabilisation and/or dissection enabled calcrete reworking and brecciation. These processes of erosion, sedimentation, reworking and renewed calcrete formation initiated by vegetation were repeated through time. They explain the complex macro- and microstructures of these calcretes and indicate that calcrete development, even reaching mature stages, can start before the fan surface is completely abandoned, but it requires episodic sedimentation. Eventually, distal fan aggradation and continuous calcrete development throughout the entire fan surface, led to the ultimate fan surface induration, controlling subsequent landscape evolution. So, fan surface calcretes cannot be envisaged as simple top-surface carbonate accumulations, but as complex feedback systems in which pedogenic, biogenic and sedimentary processes interact in response to the evolving fan-surface dynamics during the terminal phases of fan development in semiarid environments. © 1998 Elsevier Science B.V. All rights reserved. Keywords: calcretes; fan surface dynamics; plant-root activity; Quaternary; SE Spain Corresponding author. Tel.: + 34-1-3944915; Fax: + 34-1-5-44-25-35; E-mail: alonsoza@eucmax.sim.ucm.es 0169-555X/98/$19.00 © 1998 Elsevier Science B.Y. All rights reserved. Pll S0 1 6 9-5 5 5 X(98)00022-1 1. Introduction During the last 30 years, the study of calcretes has become a major topic for sedimentologists, geomor­ phologists and soil-scientists. The increasing interest is due to the fact that calcretes are fonned within soil profiles and it requires specific, geomorphological and/ or sedimentary settings. Hence, their occurrence and characteristics provide a useful tool for the interpretation of the sedimentary environment and paleogeography of the area where they were fonned. Moreover, calcrete development itself is not well understood, and the variety of proposed genetic mod­ els arise from the debate between the specific role of pedogenic, biologic and synsedirnentary processes in their formation. Calcrete development is a characteristic feature on Quaternary fan surfaces in modern semiarid environ­ ments, indicating very limited sedimentation and/or surface stabilisation (Goudie, 1973). Calcretes have a strong impact on fan-surface geomorphology, con­ trolling the degree of surface induration, planation, and future preservation (Lattruan, 1973). The degree of calcrete development can control the extent and location of the sedimentary and erosive processes on fan surfaces. Indurated surfaces can prevent lateral channel erosion, favouring linear incision in the more friable underlying chalky and nodular horizons, but may also reduce infiltration rates, thereby accelerat­ ing runoff and favouring the development of karstic micro-fonns (Goudie, 1973; Lattruan, 1973). Cal­ crete formation on these fan surfaces seems to be the result of complex geomorphic, biogenic and pedo­ genic processes, in which plant roots and associated microorganisms play an important role (Montenat, 1981; Vogt, 1984; Verrecchia, 1987; Wright, 1991; Sancho and Melendez, 1992; Alonso-Zarza et ai., 1998). Calcrete crusts occur widely in semiarid SE Spain, capping Pleistocene fan surfaces, being one of the more extended and distinctive 'facies' of these de­ posits (Harvey, 1984, 1990). Some of the classical models of calcrete development and related pro­ cesses are based on studies from this zone (Dumas, 1977; Montenat, 1981). In this paper we describe different calcrete profiles developed on middle-late Pleistocene fan surfaces from SE Spain (Campo de Cartagena, Murcia). The results obtained in this study came from an integrated petrological and geomor­ phological analysis of calcrete profiles and fan sur­ faces. In doing so, we intend to show that calcrete formation and fan surface dynamics are so closely linked, that they behave as a whole feedback system. 2. Geological and geomorphological setting The study area is located in the Eastern Betic Cordillera in the inland sector of the Campo de Cartagena (Fig. 1). In this zone, two of the most important strike-slip Quaternary basins of the region meet, the Guadalentin Depression and the Mar Menor Basin (Silva et ai., 1993). This zone constitutes a narrow tectonic corridor bounded by the Sierra de Carrascoy to the North, and to the South by the Sierra del Algarrobo and ancient late Neogene reliefs on deformed marine sediments. Along this corridor, an ancient Plio-Pleistocene fluvial system, coming from the Guadalentin Depression, flowed towards the Mediterranean sea (Mar Menor), connecting the two basins and leaving up to 150 m of fluvial sediments (Silva, 1994). Subsequent middle Pleis­ tocene tectonics, broke up the ancient fluvial system through the generation of a set of N -S trending nonnal faults, which disconnected the basins and triggered the development of a partly enclosed por­ tion in the study area. This led to the development of transverse alluvial fan systems (Silva et ai., 1996) fed by marginal reliefs. The most recent drainage development in this area has led to partial relief inversion in the southern part. The Holocene headward erosion of the drainage network of the Mazarr6n Basin, directly connected to the Mediterranean sea, eroded part of the southern late Neogene reliefs in which some of the study fans had their headwaters (Silva et ai., 1996). Also, sev­ eral stream captures are evident in the ancient fan headwaters, located within the Sierra del Algarrobo, by drainage systems flowing to the Mediterranean (Fig. 2). These facts, suggest that sediment supply to the study fans was disrupted by the capture of their fonner drainage basins, leading to a premature aban­ domnent of the fan surfaces during the late Pleis­ tocene. The present geomorphology of this southern zone is dominated by a large escarpment (10-19 m high, El Saladillo Scarp), which beheads most of the - \ \ Campo de \ Cartagena "- -\_ Rqrnbl e. p,.lamo - -- _ ':..de r� / __ - - / Fig. 1. Location of the study area within the Eastem Betic Cordillera (SE Spain). Shaded zones are major reliefs. pointed zones are late Neogene basins and plain zones. represent Quaternary sediments. Major geological structures are also shown. Pleistocene fan surfaces, and forms a tableland land­ scape, controlled by the occurrence of indurated calcrete crusts on the abandoned fan surfaces (Fig. 2). Geomorphological mapping, indicates that the former proximal and distal fan segments were inte­ grated as one indurated geomorphic level linked to calcrete development. Apart from the strong erosive processes beheading fan surfaces along the southern El Saladillo Scarp, little local denudation has oc­ curred on the rest of the ancient fan surfaces since they were prematurely abandoned. Fan surfaces are being dissected today by rills and gullies, which rise on this surface and are tributaries of old, presently incised, interfan channels. The latter delineate of the ancient individual fan geometry, and most of them are also beheaded at the scarp. The incised interfan channels are connected to the Rambla Fuente Alamo, an E-W channel, which tlows towards the Mar Menor and constitutes the axial drainage of the Campo de Cartagena. 2.1. Bedrock and fan geology The study fans issued from the Sierra del Algar­ robo and former late Neogene reliefs, onto the down- faulted and tilted Plio-Pleistocene tluvial deposits that infill the tectonic corridor, but in proximal areas they can rest on older marly marine Neogene de­ posits (Fig. 2). Source area geology, varies from the high-grade metamorphic rocks, marbles and low­ grade carbonate metamorphic rocks of the Sierra del Algarrobo to the marine marls and calcarenites of the former late Neogene reliefs located to the west. Fan deposits constitute thin alluvial veneers which thicken downfan (South to North) from 3 to 5-6 m, cut into previous mature red soils, with prismatic Bt argilic horizons (7.5YR 5/6) to 1-2 m thick, devel­ oped on the former fluvial sediments. They can be grouped into two, those in the proximal fan areas, close to the El Saladillo Scarp, characterised by fining upwards, clast-supported, subangular gravels with interbedded silty layers, inset by flat gravel channels with Gm/Gp facies (distributary channels), and those in the distal fan areas, comprising reddish silty-clayey structureless deposits, with thin in­ terbedded fine sandy bodies of pseudo-tabular and/or channel-shaped geometry with basal gravel lags. The more distal deposits record the occurrence of, at least, two red paleosols with discrete Bt prismatic horizons (5YR 4/6). In contrast, the proximal gravel (::. : . j Metamorphic Basement t��1:f:n Neogene Volcanic rocks • Tortonian D Mesinian [:.:>;j Pliocene (litoral) �I:: II!I'I! Plio-Quaternary (fluvial) mg Fan-surface Calcretes r7"'1 WJ Alluvial fans � Colluviums g: :: 1 Playa-Iake Deposits -- \1---------. --Ll-------- ,:r< Drainage network .. p El Saladillo Scarpment � Crests � Cuestas Faults Fluvial Capture Algarrobo Cave Fig. 2. Detailed map of the Gudalentin Depression-Campo de Cartagena Basin linking zone showing the main geological and geomorphological units and the location of the studied calcrete profiles. supports a single, but more developed red soil, with a thick Btc horizon (7.5YR 4/8), although weakly developed brown paleosols are common within chan­ nel fillings. Taking into account pedostratigraphic and dynamic models for alluvial fans (Harvey, 1984; Wright and Alonso-Zarza, 1990), the recorded sedi­ mentary facies and pedogenic features indicate that the last stages of fan development were probably controlled by proximal trenching and distal aggrada­ tion. Eventually, inset channels located in proximal areas were filled, promoting the occurrence of thin, fine-sediment sheet floods throughout the entire fan surface on which calcrete development took place, contributing to the ultimate homogenisation of fan surfaces. Fan surfaces are currently inactive, supporting massive indurated calcrete crusts, 2-3 m thick, over the entire fan surfaces. In some cases carbonate accumulation linked to calcrete development can reach 5 m deep, affecting the former fluvial red paleosols (Fig. 3A and B). Calcretes can display a different number of calcic horizons, characterised by the occurrence of surface laminar horizons, similar to the stage VI of Machette (1985). Three broad age-re­ lated types of calcrete crust have been traditionally considered in southeast Spain (Dumas, 1977; Har­ vey, 1984 and Silva et aI., 1992): Weak calcretes (stage II) of late Pleistocene (Wiirm) age; Mature caIcretes (stages II-IV) of pre-Wiirm age; and Mas­ sive calcretes (Stages v-vI) of early-middle Pleis- Fig. 3. (A) Calcrete profile in the proximal area. Railway section (Tl8 in Fig. 2). (B) Calcrete profile in the distal area (T20 in Fig. 2). Note that the profile is thicker than A. For calcrete horizon codes, see Fig. 4. tocene age. On the basis of the calcrete development stages, these fan deposits have been commonly as­ signed to the Plio-Pleistocene Sucina Formation of Montenat (1981), but more recent studies on fan sequences in south-east Spain indicate that this kind of massive calcrete is not a good quality age-indica­ tor, as suggested by Lattman (1973), and probably only indicated a pre-Wlirm age (Harvey, 1990; Silva et aI., 1992). In addition, paleomagnetic studies in alluvial deposits of the easternmost sector of the Campo de Cartagena Basin, indicated that similar fan-surface calcretes post-date the Bruhnes­ Matuyama reversal, suggesting a broad middle Pleis­ tocene age for these carbonate accumulations (Somoza et aI., 1989). Moreover, the relationships of similar massive calcretes with Tyrrhenian deposits in the neighbouring Elehe Basin, indicate that their development could even be younger, of middle-late Pleistocene age ca. 250 ky ago (Goy et aI., 1990). 2.2. Climate and vegetation The present climate is semiarid, with total precipi­ tation ranging between ca. 350 mmjyr to ca. 250 rnrn/yr, and with most precipitation concentrated in short-episodic stormy events in autumn and spring, the so called 'Cold-Drop Events' (Lopez Gomez and Lopez Gomez, 1987). Pleistocene climates in the Betic Cordillera, recorded in high-altitude palynolog­ ical surveys, also appear to have been dry during the cold phases, with insufficient moisture to support extensive tree covers (Pons and Reille, 1988). The nearby palynological records, from cave-fillings of the Sierra del Algarrobo, indicate that the important Quaternary climatic fluctuations recorded in Europe were not relevant to the low-altitude Mediterranean zone. No substantial vegetation changes have been recorded in the last 250,000 years, which have been dominating by a steppe-type cover of xeroesclerofile bushes characterised by the occurrence of species of Artemisia and Chenopodiaceae (Munuera and Carrion, 1991). These species are similar to the ones sparsely distributed on the present fan surface relics. Under the present conditions the fan surface cal­ cretes are unstable. They show variable stages of degradation by plant root disruption and weathering, resulting in the occurrence of unconsolidated caliche rubble (sense of Lattman, 1973), constituted by an­ gular fragments of laminar and brecciated calerete embedded in a reddish-brown clay matrix. Both, the clast plant-root relationships and the angularity of the clasts, seem to indicate that mechanical rather than chemical processes are the cause of the present calcrete degradation. 3. Techniques and methods Five selected calerete profiles were studied. Two of them developed on proximal areas of alluvial fans and the others corresponding to calcrete development on distal fan deposits (Figs. 4 and 5). For each profile, one sample was obtained from every distinc­ tive horizon, and about 65 were studied under the transmitted light microscope. Scanning electron mi­ croscopy was carried out on a JEOL 6.400 working on 20 kV, and fracture surfaces covered with gold were used. The mineralogy of the samples was deter­ mined using a Philips XRD system operating at 40 kV and 30 mA with a Monochrome CuKa radiation. Clay mineralogy was determined after treating the powdered sample with 5% HCI for 24 h. 4. Ca1crete profiles The calerete profiles of the study area were formed from well differentiated horizons of carbonate accu­ mulation on a macro and microscale. In this section, the macro and micromorphology and sequential ar­ rangement of the six recognised horizons on both proximal and distal areas of fan surfaces are de­ scribed (Figs. 4 and 5). Soil horizons strongly im­ pregnated by carbonate are termed as K horizons, according to the terminology of Gile et al. (1965). If the horizons are formed from root activity, Wright et al. (1995), proposed the use of the suffix 'rh'. In the case study, the whole calerete profiles correspond to a K horizon, that contains several different morpho­ logical horizons, which do not occur in the same part of the profile, so we name them according to the terminology of Esteban and Klappa (1983) on the basis of their most prominent feature. They mostly respond to the classic prismatic, chalky, nodular, T.19 CASA DE LAS LOMAS T.16 LOMA DE VEA T.17 LOMA DEL VIENTO T.20 LOMA DE LA BEATA I OISTAL ZONES I Calcrete Truncation Sediment [E®)(IMAL ZONE I Bh Brecciated Horizon Mch Complex Massive·Chalky Horizon Ch Chalky Horizon Lh Laminar Horizon Mh Massive Horizon Ph Prismatic transitional Horizon Nh Nodular Horizon Fig. 4. Sections of selected calcrete profiles, showing the arrangement of the different horizons. For location see Fig. 2. massive, coated gravel and laminar horizons reported by previous authors (Gile et aI., 1966; Esteban and Klappa, 1983; Machette, 1985). However, the associ­ ation of the different horizons does not always result in the typical or characteristic calcrete profiles de­ scribed by those authors. Not all the profiles contain the six horizons and in distal areas, some horizons, especially the chalky, massive and laminar horizons, may occur in different positions within the calcrete, SE Red Paleosoil (Blc) gIVIng rise to complex composite profiles (Fig. 3B and Fig. 4). Thus, by the term profile, we describe the whole association of horizons without consider­ ing if it is a single or composite profile. 4.1. Prismatic horizon In most cases, the calcretes and specifically this type of horizon are developed on reddened sands and NW Fig. 5. Cross-section of the railway cut showing the distribution of ca1crete profiles and/horizons in the proximal fan area (T18 in Fig. 2). clays. The sands are mainly litharenites with frag­ ments of metamorphic rocks. The clays occur as individual beds or as the matrix of the sand deposits. The hosts show prismatic structures with prominent cutanic features developed along the vertical cracks that delineate the prisms. The prismatic horizon forms the base of all the studied profiles and lies directly on the host rock or substrate, so it is the transitional horizon from the host to the upper. mostly carbonate. horizons. The thickness varies from 0.5 to 1.25 m. It is composed of vertically elongated carbonate nodules up to 30 cm long and about 8 cm in width. The carbonate content increases progressively upward, so in the base of the horizon the nodules are disCOIlllected from each other and separated by red clays. At the top of the horizon, most of the nodules are in contact and little clay or sand can be recognised between them. The carbonate nodules consist of sands and clays cemented by white carbonate. Illuviation eutans are common in some grains. Vertical cracks, probably due to root penetration. are filled by fme grained peloids. Horizontal cracks up to 2 mm in width and several cm long occur along the nodules. The nod­ ules show a fme network of cracks, due to desicca­ tion processes or to root penetration. The micro fabric of the horizon consists of etched detrital grains float­ ing in a micrite-microspar matrix with usually empty cracks (Fig. 6A). 4.2. Chalky horizon This is a soft horizon whose thickness varies between 15 and 80 cm and mostly lies on the prismatic horizons, but also occurs, directly within the host rock or interstratified within the massive horizons (see below). The base of the horizon is commonly very irregular so the geometry is wavy or lenticular with abrupt changes in thickness. The microfabric consists of a micrite and/or mi­ crospar matrix with etched detrital grains and peloids. The peloids are rounded and about 0.75 mm in diameter. They were formed by a nucleus. made of a detrital grain or root debris and micritic laminated coatings (Fig. 6B). The coatings are usually dark and regular with different laminae. formed by dark mi- crite with few detrital grains and by lighter micrite with more detrital grains and prismatic calcite crys­ tals, up to 20 ,urn in size. This horizon shows a number of desiccation (Fig. 6B) and root cracks. Alveolar septal structures are very common within the cracks. in the nucleus of the peloids and border­ ing the peloids. The occurrence of the peloids results in a granular appearance. In cases where these hori­ zons develop within massive horizons, they show the same petrographical characteristics. except that they commonly include reworked fragments of laminar horizons. 4.3. Nodular horizon The nodular horizon lies on the prismatic and/or chalky horizons and is usually overlaid by the mas­ sive or laminar horizons (Figs. 4 and 5). The thick­ ness of the horizon averages 0.4 m. They consist of carbonate nodules about 6 cm in diameter. The nodules are relatively harder than the surrounding matrix. which is usually made of chalky limestone or red clays. The nodules vary in morphology between vertical. horizontal. irregular or even branched. This horizon differs from the prismatic horizon in terms of morphology of the nodules and the lack of clay between the nodules. Microscopically, the horizon is composed of mi­ crite. rich in etched detrital grains (up to 20%) of quartz and fragments of sedimentary and low grade metamorphic rocks. The detrital grains are usually coated by laminated micrite in which the different laminae are composed of either dark and dense micrite, micrite and microspar, or by brownish mi­ crite due to the presence of clay (palygorskite). Some fragments of dense micrite also occur within the micrite matrix. 4.4. Massive horizon This horizon commonly overlies the nodular or chalky horizons and underlies the laminar one (Figs. 4 and 5). The thickness of this horizon averages 0.5 m. It is very indurated. Two different types of mas­ sive horizons have been recognised. In the proximal areas, they consist of a relatively homogeneous mi­ crite-microspar matrix with few detrital grains and Fig. 6. Microphotographs of thin section of ca1cretes. (A) Prismatic horizon. Detrital grains are embedded in micrite. Some relict clays from a previous Bt horizon are recognised. (B) Chalky horizon. Micritic coated grains resulting in a granular fabric. The nucleus of the grains is formed by light micrite, whereas in the coatings, micrite is denser. Coatings are very irregular. (C) Massive horizons of the ca1crete are formed by dense micrite, with microsparitic laminae showing alveolar septal structure and micritic coated grains. Detrital grains are also present. (D) Detailed view of C. Alveolar septal structure occurs in the nuclei of the grains, as well as in the surrounding matrix. The coatings of the grain contain silt-sized detrital grains. (E) Laminar microfabric is formed of an alternation of micrite and micro spar laminae. The contact between them is very irregular and some microspar-sized crystals are included within the micrite. (F) Laminar microfabric contains spherulites arranged in irregular bands. micntlc peloids, usually lacking laminated micntlc coatings. In this case, the peloids consist mostly of dense micrite, and their morphology varies from rounded to very angular. The matrix shows a net­ work of planar cracks, several millimetres wide and alveolar septal structures. In the distal areas, the maSSIve horizons also occur overlying and degrading previous laminar horizons. This causes a clear disruption of the classic sequential arrangement of calcrete profiles described by Gile et al. (1966) and Machette (1985). The main distinctive feature of these kinds of horizons, is that they are interstratified with centimetre laminae of a chalky nature, displaying in all cases a basal chalky zone, of variable thickness, with a fine-grained basal lag of metamorphic clasts and reworked angular fragments of previous laminar horizons. This indi­ cates that these atypical massive horizons are devel­ oped in relation to sedimentary disruptions, when new fme veneers of sediments (0.2-0.4 m) are de­ posited in distal zones, truncating the underlying laminar horizon and generating new available space for calcrete development. Commonly, this kind of horizon vertically evolves to typical massive hori­ zons overlaid by a laminar horizon. Some lamination is also recognised. The laminated areas are about 3 mm in thickness and occur isolated within a dense micrite, that includes rounded grains with micritic coatings. The laminae within the coated micritic grains (Fig. 6C,D), as well as within the larger laminated areas, are very irregular and consist of light laminae formed by microspar alternating with darker laminae made of micrite with some etched detrital grains and loose microspar crystals. In both proximal and distal areas, alveolar septal structures occur within any of the laminae as well as in the dense micrite matrix. This matrix is relatively porous due to the occurrence of small tubiform pores, up to 1 mm in diameter, generated by root accommoda­ tion. 4.5. Horizons formed of coated gravels These horizons occur only in the profiles of proxi­ mal alluvial fan areas, in the Venta Seca and railway outcrops (Figs. 4 and 5). They commonly substitute or are laterally linked to the massive horizons in these proximal areas, being overlain by laminar hori­ zons. They are developed on gravel deposits, that consist of angular to rounded clasts 0.3 to 2 cm in diameter. Clasts are mostly of carbonates (limestones and dolostones) and metamorphic rocks. Occasion­ ally, some very angular calcrete clasts sourced from lower calcrete horizons occur. The base and top of these horizons are usually sharp, with the base being irregular and the top, planar. The irregular base is a relic feature, which indicates that this kind of car­ bonate accumulation is mainly accommodated to the geometry of charmel-like bodies. Therefore, the thickness and extent of these horizons are variable, from 0.1 to 1.5 m in depth and 5-12 m of lateral extent. The horizon is very indurated and is formed by clasts coated by reddened carbonate laminae. The laminae usually coat all the clasts, although, they are relatively asymmetrical, being thicker on the lower part of the clast than on the upper part. The laminae are composed of dense micrite, micrite with alveolar structure and/or microspar. The coated clasts are embedded in a dense matrix that consists of irregular masses of microspar including some detrital grains and micrite with alveolar septal structure. 4.6. Laminar horizon This horizon is usually the topmost horizon of the profile, overlying massive or nodular horizons. The thickness reaches up to 0.9 m in the profiles, devel­ oped in distal areas. However, in the proximal areas the horizon is thinner or may be absent. This con­ trasting thickness and/or occurrence seems to be directly linked to the fan-surface dynamics during the last stages of fan development. Thicker laminar horizons in distal areas, dominated by limited aggra­ dation, is the result of episodic sedimentation gener­ ating new space for calcrete development. In proxi­ mal areas, dominated by channel trenching and dis­ section below the fan surface, sediment input is absent or very reduced, resulting in calcrete rework­ ing and degradation, and leading to the occurrence of thinner laminar horizons. In the distal areas, this horizon also occurs intercalated within the profile and not only as the topmost layer. In this case, they are thinner (up to 0.25 mm) and overlain by the chalky-massive interstratified horizons linked to sed­ imentary inputs. The lamination is clear at different scales. Macroscopically, laminae of 3 to 10 cm thick are clearly distinguished and have a wavy and con­ torted appearance. At more detailed scales, the lami­ nae are of 0.5-1 cm thick and consist of alternations of smaller scale, dense and porous, micritic layers and grains with micritic coatings (Fig. 6E). Micro­ scopically, up to five different types of laminae may be present: micritic layers, micritic layers with fme tubiform pores, laminae very rich in alveolar septal structures, microsparitic laminae and laminae includ­ ing micritic coated grains. At the top, these laminar horizons are commonly both brecciated and indurated, so that angnlar frag- ments of the laminated horizons are included as clasts, that are coated by new and discordant laminae of millimetre scale. Stages of brecciation and/or reworking and coating have been repeated through time, as the fragments show different sets of discor­ dant laminae, that cut previous ones. The unconsoli­ dated caliche rubble degrading the topmost part of these horizons, could represent the incipient stage of a new period of calcrete brecciation. This indicates that near-surface plant root mechanical weathering may have induced the calcrete disagregation. 5. Characteristic features Detailed analyses of thin sections. as well as SEM have shown, that most of the horizons present some features whose occurrence may be a good indicator of processes operating in calcrete formation. These features are described below. 5.1. Alveolar septal structures and calcified fila­ ments They are present in all the profiles studied and in most of the horizons. They occur in pores, bordering or within the laminae of coated grains and forming some of the layers of the laminar horizon. They consist of a network of micritic septa (Fig. 6C.D). whose voids are, in some cases, cemented by calcite spar. Under the SEM. the septa are seen as calcified filaments 100 /Lm long and 2-5 /Lm in diameter (Fig. 7 A). Alveolar septal structures are commonly recognised in calcretes as well as palustrine lime­ stones and their formation is considered to be the result of fungal activity in symbiotic association with roots (Wright. 1986). Calcified filaments occur not only in the alveolar septal structures, but also in the micritic coatings of some grains and as bridges between them. They are relatively straight, although some are curved or sinu­ ous. Usually, they can be seen as one single calcified filament. but Y-shaped branching has been observed (Fig. 7B.C). The filaments are connected to each other (Fig. 7D.E) in a very irregular way. and some­ times they are also connected with spherical bodies about 100 /Lm in diameter. The calcified filaments consist of a dense packing of rhombohedral-shaped crystals. 1 /Lm in size. probably of calcite but cal­ cium oxalate cannot be excluded. In some cases, longer crystals up to 10 /Lm long and 2 /Lm wide. grow perpendicnlarly to the filament (Fig. 7 A). These crystals could have been initially of calcium oxalate. according to crystal morphologies described by Ver­ recchia et al. (1993). Calcified filaments have been recognised very often within calcretes of different ages (James. 1972; Kahle. 1977; Klappa. 1979a; Phillips et al.. 1987). Most authors consider that. the filaments are calcified fungal filaments. although this is not a direct interpretation as the precipitation of calcite or calcium oxalate erases most of their mi­ crostructure and morphology. However, the recogni­ tion of branching and the morphology of the rare non-calcified filaments (Fig. 7B.C) in the studied calcretes suggest a fungal origin for them. Moreover, crystal morphologies are similar to those described by Verrecchia et al. (1993) for the initial stages of fungal biomineralization. 5.2. Coated grains Two types of coated grains are observed in the studied profiles; (a) detrital grains (metamorphic or sedimentary rock fragments) that show very irregular micritic laminated coatings. Some of the laminae are solely fonned by alveolar septal structures. The size of the grains varies from 0.3 mm to 4 cm and depends on the original size of the detrital grain. The micritic coating is thinner than the detrital grain. The coatings show different colours due to the varied proportions of clays (mostly palygorskite) and finer detrital grains. (b) Coated grains in which the nu­ cleus is formed either by homogeneous or laminated micrite or by alveolar septal structure (Fig. 6B.D). Moreover, in some cases, the grains are solely formed by coatings lacking a visible non-laminated nucleus. The coatings are usually. relatively. regular and tend to be spherical. The mean size of the grains is 1 mm. The coatings are formed from dense micrite, includ­ ing brown clays (palygorskite). alveolar septal struc­ tures and microspar. They vary in colour from white to pale brown. The contact between the coated grain and the surrounding matrix varies from being out­ lined by circumgranular cracks to very diffuse or gradual. The occurrence of alveolar septal structures, calci­ fied filaments (Fig. 7E), detrital grains and clays as well as the lack of larger calcite crystals make these grains very different from other coated grains such as oncoids, cave pearls or ooids, amongst others. Coated grains similar to those described in this study have been commonly recognised in calcretes (Calvet and Iulia, 1983; Wright, 1986), palustrine carbonate (Freytet and Plaziat, 1982; Wells, 1983) and peritidal settings (Mazullo and Birdwell, 1989). The forma­ tion of these grains requires the individualisation of the nuclei either by desiccation or root activity as described by Alonso-Zarza et al. (1992) and fhe formation of the coating. The formation of the mi­ crite envelopes seems to be controlled by biogenic activity of roots and associated microorganisms, spe­ cially fungal filaments (Fig. 7E) (Calvet and Iulia, 1983; Alonso-Zarza et aI., 1992; Iones, 1987). In fhis study, fhe process of coating formation is more complex, as reflected in the occurrence of palygorskite and fhe diffuse boundaries between nu­ clei and coatings and coatings and matrix, observed in some of our examples. The incorporation of silt­ sized detrital grains (Fig. 6D) wifhin fhe coatings, may indicate fhat fhe nuclei rolled wifhin fhe soil and thus, could incorporate any loose component of the soil. The rolling of fhe grains could be favoured by fhe growfh of roots or root hairs. Bofh fhe precipita­ tion of carbonate in relation to the organic filaments and fhe rolling of fhe clasts explain fhe morphology and composition of the coated grains. Moreover, precipitation of micrite in the grain boundaries and in the surrounding matrix favoured the formation of diffuse boundaries. The presence of palygorskite mixed with micrite in some of the coatings has also been recognised by Hay and Wiggins (1980) in peloids and ooids of Quaternary calcretes developed on volcanic host-rock. They considered fhat, paly­ gorskite was fonned as a replacement of AI-rich detrital clays. Formation of aufhigenic clays, such as palygorskite and sepiolite in calcretes, is fhe result of Mg-emichment of fhe vadose waters after fhe pre­ cipitation of Low Mg Calcite in fhe calcrete (Watts, 1980). 5.3. Microspar and pseudospar calcite Microspar and pseudospar-sized calcite crystals occur mostly in the massive and laminar horizons. They are usually present as irregular bands averaging 0.2 mm in widfh fhat alternate wifh micrite laminae. The boundaries of fhe bands tend to be sharp but very irregular (Fig. 6E,F), alfhough some diffuse­ gradual transitions from micrite to microspar are present. Isolated patches of micrite wifhin fhe mi­ crospar and pseudospar are common and in the same way patches or even individual microspar crystals are present within the micrite. The microspar crystals are about 15 /Lm long and about 10 /Lm wide. They occur eifher wifh fheir longer axes perpendicular to the general lamination or completely disorganised and lacking any type of orientation (Fig. 7F). They are mostly anhedral and under SEM clear dissolution features following cleavage of fhe crystals are recognised (Fig. 7G). Filaments, mucilaginous sheaths as well as rods of bacteria are present on the surface of some calcite crystals (Fig. 7G). The origin of microspar and pseudospar in vadose environments is unclear. Tandon and Friend (1989) have suggested fhat it may be fhe result of early recrystallization processes. However, fhe anhedral morphologies, the dissolution features and the occur­ rence of organic structures on some crystals indi­ cated fhat micro and pseudospar may not only be fhe product of recrystallization process, but may also be due to multiple phases of growfh and dissolution (Wright and Peeters, 1989) or to processes of dis­ placive and non-uniform growfh (Saigal and Walk­ don, 1988). Moreover, in our case, the occurrence of the organic structures could contribute to the dissolu­ tion, weathering and precipitation of the crystals and even to the disaggregation of the microspar and Fig. 7. S.E.M. images. (A) Calcified filaments in which short parallelepiped crystals co-exist with longer ones. These morphologies seem to represent the earliest stages of calcification by weddellite (see Verrecchia et al., 1993). (B) Network of non-calcified filaments, probably of fungi growing amongst the microspa- crystals. (C) Detailed view of B, septa within the filaments are ne Coarse detritals Fan Surface Degradation Erosion> Deposition Fig. 8. Model for the fonnation of different calcrete profiles in the study area. For Stage 6, different erosion/sedimentation relations are envisaged as well as different host sediments. See text for detailed explanation. rise to the formation of the massive horizon by growth and coalescence of individual nodules at different scales. During this stage. the K horizon is progressively indurated and porosity is drastically reduced, promoting a near-impermeabilization of this level. which inhibits the infiltration of meteoric wa­ ters. leading to the occurrence of perched and episodic micro-water tables above it. 6.5. Stage 5 Root systems call1lot easily penetrate the in­ durated massive horizon. In addition, water is mainly confmed to the uppermost part of the profile in the still unconsolidated zone above the massive horizon, so that the geometric pattern of root growth changes. Plant roots. looking for water. tend to extend later­ ally. promoting the development of sub-horizontal root networks. The laminar horizon starts to form in the still unconsolidated uppermost zone. A similar effect has been described for the transition between nodular and platy horizons (Esteban and Klappa. 1983). The degree of development. characteristics and thickness of this horizon. depends on the time that the root systems are able to be supported either in the upper soil horizon or by the new detrital deposits. In this last case, new sediment inputs gen­ erate additional available space for calcrete growth. leading to the occurrence of thick laminar horizons. From this stage, calcrete formation can follow differ­ ent paths. depending on the relation between calcrete formation and erosion/sedimentation processes linked to the latest phases of fan surface develop­ ment (Fig. 9). We refer to the next stages as 6A. 6B and 6C. 6.6. Stage 6A Erosion and sedimentation do not occur or the balance between them is close to zero. In this case, reworking and brecciation of the laminar horizon or of the whole profile take place. This would be the case for calcrete profiles located in proximal fan settings away from fan surface charmels during late stages of fan development. But also. these conditions control broad areas of the fan surfaces today. espe­ cially those in inter-gully locations in distal zones. Plant roots induces mechanical weathering. degrada- tion and reworking of the topmost laminar horizon, which results in the development of what is presently unconsolidated caliche rubble. probably representing an early stage in the formation of indurated brec­ ciated horizons. Also. very limited deposition. pro­ moted by surface runoff after episodic stormy events may contribute to the development of these thin unconsolidated formations on the fan surface. 6.7. Stage 6B Deposition is greater than erosion, but is episodic, contributing new surface sediments for plant estab­ lishment and subsequent development of new root networks. Episodic deposition is recorded in distal fan locations. disrupting the sequential evolution of the calcrete profiles and leading to the development of a new profile, thus generating composite profiles. In these zones, where new deposition is characterised by fme-grained sediments. new complex chalky­ massive interbedded horizons overlain by laminar and brecciated horizons may be formed. If the sedi­ ments are coarse gravels, as occurs in ChaIlllel fill­ ings at proximal locations, coated gravel horizons form the base of the subsequent profile after erosion and brecciation of the previous laminar horizon. No similar conditions are recorded today on fan sur­ faces. 6.8. Stage 6C Erosion rate is higher than sedimentation rate. The upper part of the calcrete profile (B horizon or detritals) is removed and the laminar horizon is directly exposed to the atmosphere. Some spherulites can be formed, and lichens may grow in surficial conditions (Klappa. 1979b). This is the case of the laminar crusts located at the base of gravel charmels in proximal areas. developed after fan head-trench incision, or broad zones of the entire fan surface topmost laminar horizon after the eventual fan aban­ donment. In this study. this latter process. after proximal channel filling coeval to eventual distal aggradation. promotes the ultimate fan surface plana­ tion. giving rise to the present tableland landscape by integration of distal and proximal zones in a single, flat and indurated geomorphic surface. Actually. I PROXIMAL ZONES ====- * DIS TAL ZONEV 1 . FAN DEVELOPMENT Earlier more humid conditions Plant colonisation (except channels) 2. FAN D EVELOPMENT more arid conditions Surface induration 3. COMPLETE FAN-SURFACE STABILlSATION Complete surface & channel floor induration . 4. ULTIMATE PHASES OF FAN DEVELOPMENT Surface planation & homogene isation 5. EVENTUAL FAN ABADONEMENT Surface stabilization & induration Calcrete subarieal exposure reworking & Brecciation Fanhead trenching Calcrete Formation Dista�Ag r ation Episodic flood ing �� Red ,oil, bo""g and development - -- - Plant colonisation '��-l f ff Early Carbonate �J-\::.: � -;1 � accumulation (Btc) Distal Aggradation Ep isodic flooding ': - . .. - " .-.. - Early Carbonate __ �Red soils burying ...:;�� , . ::: accumulation (Btc) � Calcrete Formation Distal Agg radation Episodic flood ing Plant colonisation burying & aditional growth in new generated space Stabi l ised fan surface Sedimentary active fan surface Fig. 9. Model for the interaction of caicrete development. vegetation and fan surface dynamics, both in proximal and distal fan areas. broad areas of the slightly higher proximal zones have laminar brecciated horizons at surface, suggest­ ing that episodic runoff erosion could have removed earlier overlying weathered materials. Also, in these zones devoid of weathered covers, the occurrence of karstic microforms at the surface is characteristic today. Stages 6A, 6B and 6C can be developed in the same profile at different times and can even be repeated, especially in distal zones. What results is a complex arrangement of horizons and microfabrics, mainly at the top of the profiles, but also within the profiles in relation to previous sedimentary disrup­ tions in distal zones. The development of these three last terminal stages of calcrete formation is showed in Fig. 9, at different fan locations (distaljproximai) and phases of fan development. Stage 6A occurs widely at proximal zones during most of the terminal phases of fan development (phases 2 to 5), but always from inset fan channels. In these locations, stage 6A only develops after channel filling and subsequent eventual fan abandomnent (phase 5). On the contrary, stage 6A is subsequent to previous 6B stages in fan distal zones, where episodic sedimen­ tary inputs generate new available space for carbon­ ate accumulation giving rise to calcrete thickening (phases 3 and 5). As illustrated in Fig. 9, this last process only occurs in proximal zones after the eventual filling of inset fan channels (phase 5). Finally, stage 6C only develops in the floor of inset fan charmel and in proximal locations. Stage 6C operates today over broad areas of the fan surfaces after strong storm events, triggering fan surface degradation (erosion + karstification) through the re­ working of caliche rubble generated during the peri­ ods of stabilisation (stage 6A). 7. Discussion and conclusions This study highlights the interaction between fan dynamics, surface hydrology, plant root growth and calcrete development. Carbonate accumulation, driven by microbial activity related to plant roots, interacts with root growth patterns and fan surface hydrology. The first stages seem to be controlled by the vertical growth of roots and the infiltration of meteoric waters, resulting in the occurrence of nod­ ules. Subsequent nodule coalescence promotes a re­ duction in soil porosity and the generation of a near-impermeable indurated subsurface level (mas­ sive horizon). Infiltration diminishes, leading to the generation of near-surface thin episodic water layers, so roots tend to accommodate to the new conditions and grow in horizontal networks, confmed at the topmost unconsolidated part of the still evolving profile. In this enviromnent, multiple laminar crusts develop, following the root paths. The growth and thickness of this laminar horizon is directly con­ trolled by the initial available space in the unconsoli­ dated topmost part of the profile. As multiple sets of laminae develop, progressive induration occurs. New root networks tend to shift towards the profile top, and eventually complete surface induration can oc­ cur, leading to the subaerial exposure of the laminar horizons. At this stage, the formation of some lami­ nae within ponded zones can take place. Complete surface hardening drastically restricts root growth at depth, so plants tend to rework the laminar crusts, via mechanical weathering, resulting in multiples phases of brecciation as carbonate is accumulated among the broken calcrete fragments, again follow­ ing these new root paths. Only in distal zones, where inputs of new sediment from proximal entrenched chaIlllels generate new available space for plant ac­ commodation, can calcretes continue to grow. This leads to the occurrence of thicker, but complex, profiles, characterised by laminar horizon truncation and subsequent development of rare interbedded chalky-massive horizons, which rapidly evolve to form a new laminar horizon. The stages of calcrete development proposed here, are not very different from those described by Gile et al. (1966); Esteban and Klappa (1983) or Machette (1985), amongst others, but it is important that in the calcretes studied, the profile is not a single profile and that in the same profile, different phases of erosion and/or deposition are needed to form a mature calcrete profile as those described here. The proposed model also considers the possibility that at some later stages, calcrete development could occur on subaerial exposure with no B horizon or detrital sediment overlying the laminar crust. Moreover, the role of vegetation in carbonate accumulation, via root activity, is important in all the horizons de­ scribed, as can be inferred from the microstructures and microfabrics identified in the petrological analy­ sis, so it seems to be obvious that plant colonisation of fan surfaces is a basic requirement for the devel­ opment of thick mature calcretes. The types of plant on these fan surfaces, since at least the late Pleistocene, corresponds to xeroesclero­ file bushes of Artemisia and Chenopodiacea species, as suggested by nearby palynological records (Munuera and Carri6n, 1991). These steppe-type plants are characterised by the development of exten- sive root systems, though their occurrence on fan surfaces could be sparse, the roots systems could expand over broad zones and favour extensive car­ bonate precipitation, restructuration and reworking. These same species indicate that similar semiarid-dry conditions to today's, were operating during calcrete development. Maybe, the fan surficial hydrology could be a more effective factor than climate in controlling water availability and soil-moisture dis­ tribution for calcrete development. In this way, even in similar semiarid conditions, if fan inactivity and subsequent dissection reduce the amount of the soil moisture on fan surfaces, available for carbonate precipitation, then reworking and brecciation of the indurated surface may occur. The occurrence of disruptions to the classic se­ quence of calerete development (Gile et ai., 1966; Machette, 1985) in fan distal zones is being reported here for the first time. The resulting complex super­ position of calerete profiles is linked to limited distal aggradation during the most recent phases of fan development. Previous authors have highlighted the role of sedimentation in calcrete development, but have always considered alternating periods of sedi­ mentation and carbonate accumulation, to result in the inhibition of calerete development and subse­ quent reworking and burying (Montenat, 1981; Ver­ recchia, 1987), or simply its reworking by dissec­ tion-induced surface abandonment during alternating phases of aggradation and dissection in fluvial ter­ race building (Sancho and Melendez, 1992). Only Harvey (1984) in the well documented Carrascoy range fans, adjacent to the studied zone (Fig. 1), reports the occurrence of superposition and trunca­ tion of main mature fan surface calcretes by more recent weak caleretes mainly developed on the younger fan distal segments. In addition, that author highlights the interaction between calerete surface induration and fan charmel geometry, reporting the occurrence of major crust-controlled headcut trenches at midfan locations. This last case is more similar to the study case, where episodic coeval sedimentation interacts with carbonate accumulation in distal zones truncating previous calcrete development but, as a whole, favouring calcrete reactivation and thicken­ ing. Therefore, even upon reaching a mature stage, calerete development may start before the eventual abandonment of the fan surface. Colonisation of fan surfaces by vegetation, and variations in the hydro­ logical behaviour of fan surface, after (episodic runoff + sedimentation) but also before (episodic thin water-tables above massive horizons and occasional ponding) the complete abandonment of the fan­ surface, seem to be the major processes controlling surface hardening, ultimate planation and subsequent homogenisation of proximal and distal fan segments as a single geomorphological surface. So, fan surface calcretes cannot be envisaged as simple top-surface carbonate accumulations, but as complex feedback systems in which pedogenic, bio­ genic and sedimentary processes interact in response to the evolving fan-surface geomorphology and dy­ namics during the terminal phases of fan develop­ ment in semiarid environments. Paraphrasing Har­ vey's words, the most distinctive facies of alluvial fans in the semiarid SE Spain are the calcrete crusts. In this way further studies of fan-surface caleretes will be incomplete if fan-surface dynamics are not considered, and vice versa. Acknowledgements We would like to thank A.S. Goudie and K. White for the careful and constructive reviews of the manuscript. We are specially grateful to the editorial work and suggestions made by A.M. Harvey. This study has been supported by the Spanish DGICYT Projects PB95-0946 (USAL) and PB95-OlOO (CSIC). References Alonso-Zarza, A.M., Calvo, J.P., del Cura, Garcfa, 1992. Palus­ trine sedimentation and associated features-grainification and pseudo-microkarst-in the Middle Miocene (illtennediate Unit) of the Madrid Basin, Spain. Sediment. Geo!. 76, 43-61. Alonso-Zarza, A.M., Sanz, M.E., Calvo, J.P., Estevez, P., 1998. Calcified root cells in Miocene pedogenic carbonates of the Machi.d Bffiin: evidences for the origin of Microcodium b. Sediment. Geo!. 1 16, 81-97. Calvet, F., Julia, R., 1983. Pisoids in the caliche profiles of Tarragona northeast Spain. ill: Peryt, T.M. (Ed.), Coated grains. Springer-Verlag, Berlfn, pp. 456-473. Dumas, B., 1977. Le Levant espagnol: La genese du relief. These d'Etat. Paris. Esteban, M., Klappa, C.F., 1983. Subaerial exposure envrron­ ments. In: Scholle, P.A, Bebout, D.G, Moore, C.H. (Eds.), Carbonate Depositional Envirorunents. Amer. Assoc. Petrol Geol. Memoir 33: 1-96. Fedoroff, N., Country, M.A, Lacroix, E., 01eschko, K., 1994. Calcitic accretion on indurated volcanic materials (examples 0 tepetates, Altip1ano, Mexico). Proc. XVth World Congress, Soil Sci., Acapulco, Vol. 6A, pp. 459-472. Freytet, P., P1az:iat, J.c., 1982. Continental carbonate sedimenta­ tion and pedogenesis-Late cretaceous and Early Tertiary of southern France. Contrib. Sedimentol. 12, 213 pp. Gile, L.H., Petterson, F.F., Grossman, RB., 1965. The K horizon: a master horizon of carbonate accumulation. Soil Sci. 97, 74-82. Gile, L.H., Petterson, F.F., Grossman, RB., 1966. Morphological and genetic sequences of ca-bonate accumulation in desert soils. Soil Sci. 101, 347-360. Goudie, AS., 1973. Duricrusts in Tropical and subtropical land­ scapes. C1arendon Press, Oxford. 174 pp. Goy, J.L., Zazo, c., Somoza, L., Dabrio, C., 1990. Evo1uci6n paleogeografica de la Depresi6n de Elche-Cuenca del Bajo Segura (Espaiia) durante e1 P1eistoceno. Estudios Geol. 46, 237-244. Harvey, AM., 1984. Aggradation and dissection sequences on Sparish alluvial fans: influence on morphological develop­ ment. Catena 11 , 289-304. Harvey, AM., 1990. Factors influencing Quaternary alluvial fan development in Southea:;t Spain. In: Rachocki, AH., OJ.urch, MJ. (Eels.), Alluvial fans, a field approach. Wi1ey, New York, pp. 247-269. Hay, RL., Wiggins, B., 1980. Pellets, ooids, sepiolite and silica in three calcretes of the southwestern United States. Sedimento1- ogy 27, 559-576. James, N.P., 1972. Ho10cene and P1eistocene crusts (caliche) profiles. Criteria for subaerial exposure. J. Sediment. Petrol. 42, 8 17-836. Jones, B., 1987. The alteration of SPaT]' calcite crystals in a vadose setting, Grand Cayman Island. Can. J. Earth Sci 24, 2292-2304. Jones, B., 1988. The influence of plants and micro-organisms on diagenesis in caliche: example from the Pleistocene Ironshore Formation on Cayman Brac British West Indies. Bull. Can. Pet. Geol. 36, 191-201. Jones, B., Squair, C.A, 1989. Formation of peloids in plant rootless, Grand Caymm, British West Indies. J. Sediment. Petrol. 59, 1002-100? Kahle, C.F., 1977. Origin of subaerial Holocene calcareous crusts: role of algae, fungi and sparrnicritization. Sedimentology 24, 413-435. Klappa, C.F., 1979a. Calcified filaments in Quaternary calcretes: organo-mineral interactions in the subaerial vooose envrron­ ment. J. Sediment. Petrol. 49, 955-968. Klappa, C.F., 1979b. Lichen stromatolites: criterion for subaerial exposure and a mechanism for the formation of lamina­ calcretes (caliche). J. Sediment. Petrol. 49, 387-400. Lattman, L.M., 1973. Calcium carbonate cementation of alluvial fans in Southern Nevada. Geol. Soc. Am. Bull. 84, 3013-3028. L6pez G6mez, J., L6pez G6mez, A, 1987. Los clima:; secos de Espana segrin la c1a:;ificaci6n de Koppen. Papeles Geogtf. Ffsica 12, 5-10. Machette, M.N., 1985. Calcic soils of southwestern United States. In: Weide, c.L. (Ed.), Soil and Quaternary Geology of the Southwestern United States . Spec. Paper. Geological Society of America, 203, pp. 1-21. Mack, GH., James, W.c., 1992. Calcic paleosols of the Plio­ Pleistocene Camp Rice and Palomas Formation, southern Rio Grande rift, USA Sediment. Geol. 77, 89-109. Mazullo, S.J., Birdwell, B.A, 1989. Syngenetic formation of grainstones and pisolites from fenestral carbonates in peritidal settings. J. Sediment. Petrol. 59, 605-611. Monger, H.c., Daugherty, L.A, Lindemarm, W.c., Liddell, C.M., 1991. Microbial precipitation of pedogenic calcite. Geology 19, 997-1000. Montenat, Ch., 1981. Observations nouvelles sur les croiltes cal­ caires pl€istocenes du Sud-Est de l'Espagne (Province d'Ali­ cante et de Murcia). Geologie Mediterraneene 8 (3), 137-154. Munuera, M., Cani.6n, S.J., 1991. Palinologfa de un dep6sito arqueo16gico en el sureste iberico semia-ido: Cueva del Algar­ robo (Mazarr6n Mtircia). Cuaternario GeomOlfol. 5, 107- 118. Phillips, S.E., Milnes, AR, Foster, RC., 1987. Calcified fila­ ments: an example of biological influences in the formation of calcrete in South Australia. Aust. J. Soil. Sci. 25, 405-428. Pons, A, Reille, M., 1988. The Holocene and upper Pleistocene pollen record from Padul (Granada, Spain): a new study. Palaeogeogr. Palaeoclimatol. Palaeoecol. 66, 243-263. Saigal, Gc., Walkdon, E.K., 1988. On the occurrence of dis­ pla:ive calcite in Lower Old Red Sandstone of Camoustie, Eastern Scotland. J. Sediment. Petrol. 58, 131-135. Sancho, c., Mel6J.dez, A, 1992. Genesis y significado ambiental de los caliches Pleistocenos de la regi6n del Cinca (Depresi6n del Ebro). Rev. Soc. Geol. Espaiia 5, 81-93. Sanz, M.E., 1996. Sedimentologfa de las Formaciones Ne6gena:; del Sur de la Cuenca de Machi.d. Monograffas. Ministerio de Fomento. CEDEX. Machi.d, 245 pp. Sanz, M.E., Wright, v.P., 1994. Modelo alternaivo para el desar­ rollo de calcretas: un ejemplo del Plio-Cuaernario de la Cuenca de Madrid. Geogaceta 16, 1 16-119. Silva, P.G, 1994. Evoluci6n geodin3mica de la Depresi6n del Guadalentin desde el Mioceno superior hasta la a:tualidad: Neotect6nica y GeomOlfologia. PhD Thesis UCM, Madrid, 642 pp. unpublished. Silva, P.G, Harvey, AM., Zazo, c., Goy, J.L., 1992. Geomor­ phology, depositional style and morphometric relationships of Quaternary alluvial fans in the Guadalentfn Deppresion (Murcia, SE Spain). Z. F. Geomorph. 36 (3), 661-673. Silva, P.G., Goy, J.L., Somoza, L., Zazo, c., Bardajf, T., 1993. Landscape response to strike-slip faIlting linked to collisional settings: Quaternary tectonics md basin formaion in the East­ ern Betics (SE Spain). Tectonophysics 224, 289-303. Silva, P.G, Goy, J.L., Zazo, C., Bardajf, T., 1996. Recent drainage evolution in the Guadalentfn Depression (Murcia, SE Spain). Geogaceta 20 (5), 1100-1103. Somoza, L., Zazo, c., Goy, J.L., Momer, N.A, 1989. Estudio geomOlfo16gico de secuencias de abanicos aluviales cuater- narios (Alicante-Murcia, Espaiia). Cuatemario GeomOlfol. 3, 73-82. Tandon, S.K, Friend, P.F., 1989. Near-surlace shrinkage and carbomte replacement processes, Arran Comstone Formation, Scotland. Sedimentology 36, 1 1 13-1 126. Verrecchia, E.P., 1987. Le contexte morpho-dynamique des croiltes calcaires : apport des analysis sequentielles a l' escale microscopique. Zeitschrift Geomorphol. 31, 179-193. Verrecchia, E.P., Ribier, J., Patillon, M., Rolko, KE., 1991. Stromatolitic origin of desert laminar limecrusts. Naturwis­ sen.schaften 78, 505-507. Verrecchia, E.P., Dumont, J., Verrecchia, KE., 1993. Role of calcium oxalate biomineralization by fungi in the fonnation of calcretes: a case study from Nazareth, Israel. J. Sediment. Petrol. 63, 1000-1006. Verrecchia, E.P., Freytet, P., Verrecchia, KE., Dumont, J., 1995. Spheru1ites in calcrete lamina- crnsts: biogenic C:C03 pre­ cipitaion as a major contributor to crust fonnation. J. Sedi­ ment. Petrol. A 65, 690-700. Vogt, T., 1984. Problemes de genese des croiltes calcaires quater­ naires. Bull. Centres Rech. Explor.-Prod. Elf-Aquitaine 8, 209-221. Watts, N.L., 1980. Quaternary pedogenetic calcrete from the Kalahari, mineralogy, genesis and diagenesis. Sedimentology 27, 661-687. Wells, N.A., 1983. Carbonate deposition, physical linmology and envirorunentally controlled chert formation in Paleocene­ Eocene Lake Flagstaff, Central Utah. Sediment. Geol. 35, 263-296. Wright, VP., 1986. The role of fungal biomineralization in the formation of Early Carboniferous soil fabrics. Sedimentology 33, 831-838. Wright, VP., 1991. Calcretes: an introduction. In: Wright, VP., Tucker, M.E. (Eels.), Calcretes. Reprint Series, Vol. 2. Int. Ass. Sediment., 1-22. Wright, VP., Platt, N.H., Mani.ot, S.B., Beck, VH., 1995. A classification of rhizogenic (root-formed) calcretes, with ex­ amples from the Upper Jurassic-Lower Creta:eous of Spain and Upper Cretaceous of southern France. Sediment. Geol. lOO, 143-158. Wright, VP., Alonso-Zarza, A.M., 1990. Pedostratigraphic mod­ els for alluvial fan deposits: a tool for interpreting ancient sequences. J. Geol. Soc. London 147, 8-10. Wright, VP., Peeters, C., 1989. Origins of some Early Carbonif­ erous calcrete fabrics revealed by cathodoluminescence: impli­ cations for interpreting the sites of calcrete formation. Sedi­ ment. Geol. 65, 345-353. A-Z-1-s2.0-S0169555X98000221-main_Página_01 A-Z-1-s2.0-S0169555X98000221-main_Página_02 A-Z-1-s2.0-S0169555X98000221-main_Página_03 A-Z-1-s2.0-S0169555X98000221-main_Página_04 A-Z-1-s2.0-S0169555X98000221-main_Página_05 A-Z-1-s2.0-S0169555X98000221-main_Página_06 A-Z-1-s2.0-S0169555X98000221-main_Página_07 A-Z-1-s2.0-S0169555X98000221-main_Página_08 A-Z-1-s2.0-S0169555X98000221-main_Página_09 A-Z-1-s2.0-S0169555X98000221-main_Página_10 A-Z-1-s2.0-S0169555X98000221-main_Página_11 A-Z-1-s2.0-S0169555X98000221-main_Página_12 A-Z-1-s2.0-S0169555X98000221-main_Página_13 A-Z-1-s2.0-S0169555X98000221-main_Página_14 A-Z-1-s2.0-S0169555X98000221-main_Página_15 A-Z-1-s2.0-S0169555X98000221-main_Página_16 A-Z-1-s2.0-S0169555X98000221-main_Página_17 A-Z-1-s2.0-S0169555X98000221-main_Página_18 A-Z-1-s2.0-S0169555X98000221-main_Página_19 A-Z-1-s2.0-S0169555X98000221-main_Página_20 A-Z-1-s2.0-S0169555X98000221-main_Página_21