Arrabal Durán, Raúl

Profile Picture
First Name
Last Name
Arrabal Durán
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Químicas
Ingeniería Química y de Materiales
Ciencia de los Materiales e Ingeniería Metalúrgica
UCM identifierORCIDScopus Author IDWeb of Science ResearcherIDDialnet ID

Search Results

Now showing 1 - 3 of 3
  • Publication
    Flash-PEO coatings loaded with corrosion inhibitors on AA2024
    (Elsevier, 2020-08-20) Olmo Martínez, Rubén del; Mohedano Sánchez, Marta; Visser, Peter; Matykina, Endzhe; Arrabal Durán, Raúl
    Flash plasma electrolytic oxidation (flash-PEO) with in situ incorporation of inhibitors is explored as a strategy for corrosion protection of 2024 aluminium (Al) alloys. Thin (~5 μm) and energy-efficient coatings were successfully developed on the Al substrate in 100 s treatment time using different electrolytes based on molybdate, stannate, tungstate, vanadate lanthanum or cerium salts additives with and without complexing agent (EDTA). Screening of the optimum combination in search of minimum thickness and best corrosion protective performance was performed using electrochemical impedance spectroscopy (EIS). Coatings based on EDTA-Ce and WO42 were selected and investigated further in comparison with the inhibitor-free phosphate coating in terms of morphology, composition, corrosion behaviour and paint adhesion. EDTA-Ce coating showed excellent paint adhesion and the highest impedance modulus at short immersion times in 3.5 wt% NaCl aqueous solution. Neutral salt spray testing of this coating as a full system comprising an epoxy primer showed no signs of corrosion after 1000 h of exposure.
  • Publication
    Hybrid sol-gel coatings applied on anodized AA2024-T3 for active corrosion protection
    (Elsevier Science, 2021-08-15) Olmo Martínez, Rubén del; Tiringer, U.; Milosev, I; Visser, P.; Arrabal Durán, Raúl; Matykina, Endzhe
    The effect of the presence of an anodic film and hybrid sol-gel coating loaded with corrosion inhibitors was evaluated as a strategy for enhanced barrier and active corrosion protection of aluminium alloy 2024-T3. In this study, AA2024-T3 specimens were anodized in a modified sulphuric-citric acid bath (SCA) as the first layer of a corrosion protective multilayer system and subsequently protected by the application of silica-based hybrid sol-gel coatings. These coatings were doped with LiNO3 and Ce(NO3)3 as corrosion inhibitors and studied in comparison with the inhibitor-free sol-gel coating in terms of morphology, composition and corrosion protection of intact and scribed specimens. The anodized AA2024-T3 with an overlaying inhibitor-free sol-gel coating showed the highest impedance modulus during long-term immersion in 0.1 mol·L−1 NaCl aqueous solution. Active corrosion protection of scribed coated specimens was studied by exposure to a 0.5 mol·L−1 NaCl solution and evaluated by surface analytical techniques. The addition of Li- and Ce-based salts into the hybrid sol-gel formulation showed active corrosion protection compared to the inhibitor-free scribed hybrid sol-gel coating. The Ce-doped sol-gel coating showed less visual corrosion and higher active corrosion protection than the Li-containing one during the long-term immersion test in 0.5 mol·L−1 NaCl. Present findings reveal that the combination of the anodic/hybrid sol-gel layers on AA2024-T3 enhances the corrosion protective properties barrier properties of both stand-alone systems and the incorporation of Li- and Ce-based inhibitors provide active corrosion.
  • Publication
    Permanganate loaded Ca-Al-LDH coating for active corrosion protection of 2024-T3 alloy
    (Elsevier, 2022-02-01) Olmo Martínez, Rubén del; Mohedano Sánchez, Marta; Matykina, Endzhe; Arrabal Durán, Raúl
    Ca-Al-Layered Double Hydroxide (Ca-Al-LDH) coating was explored on 2024-T3 aluminium alloy by in situ growth methodology following a 1 h treatment at atmospheric pressure. Mn-based species were successfully incorporated into the Ca-Al-LDH structure by a low-temperature post-treatment (Ca-Al-LDH-Mn). Both LDH coatings disclosed a flaky-like morphology and low thickness (~0.6 µm). Ca-Al-LDH-Mn coating showed optimal paint adhesion and the highest long-term corrosion resistance in 3.5 wt% NaCl solution. Evaluation of scribed LDH specimens by SEM/EDS techniques up to 7 days of immersion in 3.5 wt% NaCl solution revealed that the presence of Mn species in the Ca-Al-LDH-Mn provided active corrosion protection.