Person:
Sánchez Brea, Luis Miguel

Loading...
Profile Picture
First Name
Luis Miguel
Last Name
Sánchez Brea
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Físicas
Department
Óptica
Area
Optica
Identifiers
UCM identifierORCIDScopus Author IDWeb of Science ResearcherIDDialnet IDGoogle Scholar ID

Search Results

Now showing 1 - 7 of 7
  • Publication
    Diffractive performance of square Fresnel zone plates
    (Elsevier, 2009-06-14) Alda, Javier; Rico García, José María; Salgado Remacha, Francisco Javier; Sánchez Brea, Luis Miguel
    We analyze the optical behavior of square Fresnel zones plates. A theoretical analysis and numerical simulations based on the Rayleigh-Sommerfeld approach have been developed analyzing properties such as the depth of focus and the intensity of the focus in terms of the number of zones. In addition, an experimental verification has been performed using a Spatial Light Modulator to implement the designed square Fresnel zones plates.
  • Publication
    Self-imaging with curved gratings
    (Elsevier Science BV, 2010-10-15) Torcal Milla, Francisco José; Sánchez Brea, Luis Miguel; Salgado Remacha, Francisco Javier; Bernabeu Martínez, Eusebio
    We analyze the near field behavior of binary amplitude gratings which present a curved profile. This configuration has an important application in rotary optical encoders. This kind of encoders is used to measure the angular displacement between two different parts of the devices. To our knowledge, its behavior in the near field has not been analyzed yet. We have found that Talbot effect is produced but the period of the self-images and Talbot distances change as we separate from the grating. We have fabricated a curved grating and have performed the experiment to corroborate the behavior theoretically found. This fact could be useful in systems that use Talbot effect to measure displacements, since the mechanical tolerances grow.
  • Publication
    Collimation method using a double grating system
    (The Optical Society Of America, 2010-06-10) Sánchez Brea, Luis Miguel; Torcal Milla, Francisco José; Salgado Remacha, Francisco Javier; Morlanes Calvo, Tomás; Jiménez Castillo, Isidoro; Bernabeu Martínez, Eusebio
    We present a collimation technique based on a double grating system to locate with high accuracy an emitter in the focal plane of a lens. Talbot self-images are projected onto the second grating producing moiré interferences. By means of two photodetectors positioned just behind the second grating, it is possible to determine the optimal position of the light source for collimation by measuring the phase shift between the signals over the two photodetectors. We obtain mathematical expressions of the signal in terms of defocus. This allows us to perform an automated technique for collimation. In addition, a simple and accurate visual criterion for collimating a light source using a lens is proposed. Experimental results that corroborate the proposed technique are also presented.
  • Publication
    Use of steel substrates in diffractive optics: Near field of high surface quality steel tape gratings
    (Elsevier Sci. Ltd., 2011-03) Salgado Remacha, Francisco Javier; Torcal Milla, Francisco José; Sánchez Brea, Luis Miguel; Bernabeu Martínez, Eusebio
    Steel tape is used in optical applications due to its mechanical properties. However, roughness of steel surfaces affects to wave propagation. The effect can be observed using diffraction gratings with low periods. In such a case, self-images of the grating appear at certain periodic distances from the grating (Talbot planes). When standard steel is used, the contrast of Talbot self-images strongly decreases with the distance from the grating. In this work, we prove that controlling the surface quality of steel, it is possible to improve its optical behavior and, as a consequence, high quality surface steel represents a good choice for diffractive optics when the use of chrome-on-glass masks is not indicated. As an example, we have manufactured a diffraction grating over a high quality steel surface by means of an ablation process with a nanosecond pulsed laser. The contrast of the self-images for these gratings decreases very slowly with the distance, in comparison with the self-images obtained with standard steel tape gratings.
  • Publication
    Effect of fill-factor on the Talbot effect of diffraction gratings
    (European Optical Soc, 2011) Salgado Remacha, Francisco Javier; Sánchez Brea, Luis Miguel; Bernabeu Martínez, Eusebio
    We analyze the effect of the fill factor of binary diffraction gratings on the near field propagation. We show that the location of the best-visibility planes changes with the configuration parameters of the grating, that is, the amplitude and phase modulation and the fill factor. Moreover, different intensity patterns and contrast shapes can be obtained when different configurations are used. Analytical expressions describing the contrast of the diffracted field are obtained, that agree with numerical simulations.
  • Publication
    Rough Fresnel zone plates over metallic surfaces
    (The Optical Society Of America, 2010-04-01) Salgado Remacha, Francisco Javier; Sánchez Brea, Luis Miguel; Álvarez Ríos, Francisco Javier; Bernabeu Martínez, Eusebio
    We analyze the focusing properties of Fresnel zone plates fabricated over steel tapes using laser ablation. Our intention is to implement the use of micro-optical elements when the use of conventional chrome–glass elements is not indicated. Because of the manufacture process, the surface presents a certain anisotropic roughness, which reduces the focusing properties. First, we develop numerical simulations by means of the Rayleigh–Sommerfeld approach, showing how roughness in both levels of the Fresnel zone plate affects the focalization of the lens. We also manufacture Fresnel zone plates over steel tape, and perform experimental verification that corroborates the numerical results.
  • Publication
    Micromachining of Diffractive Optical Elements Embedded in Bulk Fused Silica by Nanosecond Pulses
    (IEEE - Inst. Electrical Electronics Engineers Inc., 2011-03-15) Salgado Remacha, Francisco Javier; Sánchez Brea, Luis Miguel; Bernabeu Martínez, Eusebio
    Micro-optical devices embedded in transparent materials are usually manufactured focusing a pulsed laser in bulk fused silica. Under this condition, pulsewidth becomes the most important parameter that rules the size of the inscriptions. Ultrafast pulses (pico- and femtosecond pulses) avoid thermal effects and the results present a high efficiency. Nevertheless, nanosecond lasers are more available due the reduced costs. Therefore, a study of the optical behavior of embedded elements micromachined by nanosecond pulses is required. In this study, we show that this regime of pulses can still be used for engraving diffractive optical elements in transparent materials, regardless of the thermal damage. A Fresnel zone plate and a far-field beam shaper have been manufactured as an example of the functionality of these devices.