2026-06-08T10:18:03Zhttps://docta.ucm.es/rest/oai/request

oai:docta.ucm.es:20.500.14352/1303512026-01-16T01:11:29Zcom_20.500.14352_14col_20.500.14352_15

Surface-decorated polyethylene glycol-graphene oxide nanohybrids for fouling mitigation in aminated polysulfone membranes treating oily wastewater Jafarzadeh, Y García Payo, M. Carmen Khayet Souhaimi, Mohamed 620.1 66.049 Oily wastewater Graphene oxide Polysulfone membrane Amination Reduced fouling Materiales 2210.19 Fenómenos de Membrana © 2026 The Authors. Membrane fouling remains a critical challenge in oily wastewater treatment, limiting the efficiency of conventional polymeric membranes. Graphene oxide (GO) is a promising hydrophilic modifier, but its tendency to restack restricts interlayer spacing and limits antifouling performance. In this work, we present polyethylene glycol (PEG)-functionalized GO nanosheets, with adjustable molecular weights, to effectively expand GO interlayer spacing and enhance the hydrophilicity and antifouling capabilities of aminated chloromethylated polysulfone (AM-CMPSF) membranes. PSF was first chloromethylated and fabricated via non-solvent induced phase separation method, followed by amination using ethylenediamine to form AM-CMPSF membranes. GO nanosheets were synthesized and functionalized with PEG of varying molecular weights, then stacked onto the membrane surface. XRD analysis confirmed that increasing PEG molecular weight broadened interlayer d-spacing between GO nanosheets. The resulting GO-PEG/AM-CMPSF membranes exhibited significantly improved surface hydrophilicity, with rapid water absorption preventing contact angle measurement, and increased water uptake (from 30.6% for the pristine membrane (M0) to 84.6% for GO-PEG20000 (M6)), and pure water flux (from 5.9 to 16.9 L·m−2·h−1). Filtration tests using a 1000 mg·L−1 oil-in-water emulsion revealed enhanced permeate flux and fouling resistance. All membranes maintained high oil rejection (85.6% - 88.1%). Permeate flux decline decreased from 41.2% for M0 to 27.2% for M6, irreversible fouling ratio from 28.6% to 23.0%, and the flux recovery ratio increased from 71.2% to 87.0%. The results demonstrate that PEG-modified GO effectively enhanced membrane hydrophilicity, antifouling behavior, and filtration performance, offering a promising strategy for advanced oily wastewater treatment. Ministerio de Ciencia, Innovación y Universidades (España) Agencia Estatal de Investigación (España) European Commission Depto. de Estructura de la Materia, Física Térmica y Electrónica Fac. de Ciencias Físicas TRUE pub 2026-01-15T15:03:03Z 2026-01-15T15:03:03Z 2026 journal article VoR https://hdl.handle.net/20.500.14352/130351 XXXX-XXXX 10.1016/j.jwpe.2026.109479 2214-7144 eng info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023/PID2022-138389OB-C31/ES/PROCESO SOSTENIBLE DE DESTILACION EN MEMBRANA FOTO-TERMICA PARA LA REUTILIZACION DE AGUA Y RECOLECCION DE ENERGIA AZUL POR ELECTRODIALISIS INVERSA ACERCANDOSE AL RESIDUO CERO/ Y. Jafarzadeh, C. García-Payo, M. Khayet, Surface-decorated polyethylene glycol-graphene oxide nanohybrids for fouling mitigation in aminated polysulfone membranes treating oily wastewater, Journal of Water Process Engineering, Volume 82, 2026, 109479, ISSN 2214-7144, Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ open access application/pdf Elsevier