2026-06-26T16:39:36Zhttps://docta.ucm.es/rest/oai/request

oai:docta.ucm.es:20.500.14352/996812024-08-28T23:59:37Zcom_20.500.14352_14col_20.500.14352_15

Sevcik, Radek Pérez Estébanez, Marta Viani, Alberto Sasek, Petr Mäcová, Petra 2024-02-06T18:33:02Z 2024-02-06T18:33:02Z 2015 Ševčík, Radek, et al. «Characterization of Vaterite Synthesized at Various Temperatures and Stirring Velocities without Use of Additives». Powder Technology, vol. 284, noviembre de 2015, pp. 265-71. https://doi.org/10.1016/j.powtec.2015.06.064. 0032-5910 10.1016/j.powtec.2015.06.064 https://hdl.handle.net/20.500.14352/99681 https://doi.org/10.1016/j.powtec.2015.06.064 Conditions for the synthesis of vaterite without additives have been investigated (T = 30 – 90°C, stirring velocity=200–600rpm). The obtained different CaCO3 polymorphs were characterized with Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). Quantitative phase analysis (QPA) was performed by the Rietveld method. To describe vaterite diffraction patterns, two structural models were employed. Their relative abundance was found to change with the temperature of synthesis. The optimal synthesis conditions for preparing pure vaterite (≥99 wt.%) were found at 60°C and 600 rpm. This is the first time pure vaterite is obtained at such high temperature without additives. The conditions under which the different polymorphs formed, and their microstructural features, are discussed. In addition, nanoindentation measurements on synthesized vaterite and calcite are firstly reported. The vaterite elastic modulus is higher than that of calcite (E = 16–48 GPa and E = 9–35 GPa, respectively), whereas the range in hardness was found to be the same for both polymorphs (H=0.4–2.8). eng http://creativecommons.org/licenses/by/4.0/ restricted access Attribution 4.0 International Characterization of vaterite synthesized at various temperatures and stirring velocities without use of additives journal article