Person:
Garzón Jiménez, Nuria

Profile Picture
First Name
Nuria
Last Name
Garzón Jiménez
URI
https://hdl.handle.net/20.500.14352/79975
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Óptica y Optometría
Department
Optometría y Visión
Area
Optica
Identifiers
UCM identifierORCIDScopus Author IDWeb of Science ResearcherIDDialnet IDGoogle Scholar ID

Filters

20232
Reset filters

Settings

Author: González Fernández, Verónica × Subject: 535.313.6 ×

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Optical Behavior of an Enhanced Monofocal Intraocular Lens Compared with a Standard One
    (Applied Sciences, 2023) Albarrán Diego, César; García Montero, María; Garzón Jiménez, Nuria; González Fernández, Verónica; Gómez Pedrero, José Antonio
    The aim of this work was to compare an enhanced monofocal (RayOne EMV RAO200E, Rayner) and standard monofocal (RayOne RAO600C Aspheric, Rayner) intraocular lenses (IOLs) for three nominal powers (+10.00 D, +20.00 D and +30.00 D) as a function of the optical aperture diameter (pupil diameter) using a commercial Schlieren phase-shifting deflectometer NIMO TR1504 (Lambda-X, Belgium). From the wavefront maps measured by this instrument, the radial power profiles, the spherical aberration coefficients of the Zernike polynomial expansion (as a function of the optical aperture radius), and the root-mean-square (RMS) of the high-order aberrations (HOAs) were obtained and analyzed by comparing the two models. The results showed that the effective added power that could be obtained with the enhanced model depended directly on the pupil size and the power of the IOL implanted. The higher additions were achieved with the higher nominal IOL powers. The relationship between the pupil diameter, the corneal aberration of the patients and the power profile of these IOLs could have a crucial implication on the far distance and the final effective addition. However, it is important to note that these findings should be clinically validated through the implantation of these models in patients’ lenses.
  • Thumbnail Image
    Item
    Design of an optical bench for polychromatic characterisation of advanced intraocular lens designs with spatial light modulator
    (2023) González Fernández, Verónica; Garzón Jiménez, Nuria; García Montero, María; Gómez Pedrero, José Antonio; Fernandez Nuñez, Sara; Albarrán Diego, César
    In recent years, the design of intraocular lenses (IOLs) has experienced a great deal of development and there is now a wide variety of designs. At the moment, some of the most interesting designs that allow for the greatest degree of innovation and customisation are lenses that combine a refractive part with a diffractive part