Person: Muñoz Martín, Alfonso
Loading...
First Name
Alfonso
Last Name
Muñoz Martín
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Geológicas
Department
Geodinámica, Estratigrafía y Paleontología
Area
Geodinámica Interna
Identifiers
16 results
Search Results
Now showing 1 - 10 of 16
Item Sobre el origen de la asimetría en el patrón general del relieve en el interior de la Península Ibérica: nuevos resultados obtenidos mediante modelación análoga(Geogaceta, 2010) Fernández Lozano, Javier; Sokoutis, Dimitrios; Willingshofer, Ernst; Muñoz Martín, Alfonso; De Vicente Muñoz, Gerardo; Cloetingh, SierdAnalogue modelling contributes to the interpretation of lithosphere scale folds in Iberia as a result of largescale convergence during Oligocene-Miocene times between the Iberian and European Plates. Different tectonothermal events affected the microplate since late Paleozoic and resulted in lateral strength variations of the Iberian lithosphere. An old and cold lithosphere, Variscan in age, can be found in the westernmost part of Iberia whereas a relative weak and hot Mesozoic lithosphere affected by episodes of rifting and basin inversion during Mesozoic- Tertiary times covers the area of the Iberian Chain. Our study aims at deciphering whether deformation and topography evolution in Iberia are related to lateral strength variations and/or the inherited structural grain stemming from Variscan deformation. We also have studied the strength of the lithosphere to gain insights into the effects of rheological variations related to local thrusting or primary strength variations along the Iberian lithosphere.Item Quantifying the erosional impact of a continental-scale drainage capture in the Duero Basin, northwest Iberia(Quaternary Research, 2018) Antón López, Loreto; Muñoz Martín, Alfonso; De Vicente Muñoz, GerardoFormerly closed drainage basins provide exceptional settings for quantifying fluvial incision and landscape dissection at different time scales. Endorheic basins trap all the sediment eroded within the watershed, which allows estimates of post–basin opening erosion patterns. The Duero Basin was a former closed basin and is presently drained by the Duero River into the Atlantic Ocean. During the Cenozoic, the basin experienced a long endorheic period, marked by the formation of continental carbonates and evaporites. The retrogressive erosion of the Atlantic drainage coming from the Portuguese coast subsequently captured the internal drainage, and significant fluvial dissection occurred. Presently, the basin contains a relatively well-preserved sedimentary fill. Gridding and surface fitting in this paper provide the first attempt to reconstruct the surface of the top of the former endorheic sedimentary sequence to quantify the erosional impact of the basin opening. At least 2251±524 km3 of sediment was removed from the formerly closed basin following the start of exorheism. This volume represents a mean basin-surface lowering of 65±13 m. Erosion estimates and landscape dissection patterns are consistent with geologic evidence of progressive establishment of an outward drainage system.Item Longest and still longer: The Messejana-Plasencia dyke and its links with later Alpine deformation belt in Iberia(Tectonophysics, 2021) De Vicente Muñoz, Gerardo; Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Cunha, Pedro P.The Messejana-Plasencia dyke (End-Triassic), NE-SW oriented, is the longest simple structure in Iberia (~500 km) and constitutes a first-order rheological discontinuity that crosses the entire crust. During the Alpine deformation, this discontinuity nucleated the Messejana-Plasencia left-lateral strike-slip fault and its related strike-slip deformation belt, consisting of a series of wide coalescent stepovers and small basins developed on the footwalls. Both structures can be followed from offshore of SW mainland Portugal to the central sector of the Spanish-Portuguese Central System. Using tectonic, geophysical, magnetic, and gravimetric analyses, our study demonstrated that it extends NE more than ~100 km below the continental sediments of the Duero Cenozoic Basin, until the Iberian Chain. We used a tectonostratigraphic analysis to determine the age of the wrench fault movement and that of the Spanish-Portuguese thrusts. In this range, the largest displacement during the Cenozoic occurred in the southern thrust of the Spanish sector of the Central System over the Madrid Cenozoic Basin, and NE-SW trending. This thrust displaces the Moho more than 10 km and probably joins the Messejana-lasencia strike-slip fault at depth. The deduced age movement for both is Oligocene-Lower-Middle Miocene, related to the intraplate stresses transmitted from the Pyrenean orogen towards its foreland. A strain partitioning process was then deduced for the simultaneous movement of both main Alpine faults in Central Iberia.Item Análisis de la estructura alpina de la corteza del centro de la Península Ibérica: Una sección Magneto-Telúrica a través del Sistema Central (Sierra de Gredos)(Geotemas, 2012) Pous, Jaume; Muñoz Martín, Alfonso; Olaiz Campos, Antonio José; Seillé, H.; De Vicente Muñoz, GerardoWe present a magnetotelluric profile across the Duero basin, the Central System and the Madrid basin, acquired in the framework of the TOPO-IBERIA project. The MT profile consists of 24 magnetotelluric sites over a 200 km, NS oriented profile. Five components were measured with periods ranging from 0.001 s to 500s. The dimensional analysis reveals a dominant E-W direction and 2D joint inversion of apparent resistivity, phases and tipper was carried out. The inverse resistivity model obtained has been compared with other geological and geophysical data, and it shows a resistive and homogeneous crust that extends towards the Duero basin. The main conductive anomalies are elongated and inclined bodies that are related with the main big–scale Alpine thrusts. Other superficial conductive bodies are related with the tertiary sedimentary basins. [RESUMEN]Este trabajo muestra un nuevo perfil magnetotelúrico (MT) a través del la cuenca del Duero, el Sistema central y la Cuenca de Madrid, adquirido dentro del proyecto TopoIberia. El Perfil MT consiste en 24 sondeos a lo largo de 200 km con una orientación NS. En cada sondeo se han medido cinco componentes con periodos de 0.001 a 500 s. El análisis dimensional revela una dirección dominante E-O y se ha realizado una inversión conjunta en 2D de las resistividades aparentes, fases y tipper. El modelo de resistividades obtenido ha sido comparado con otros datos geológicos y geofísicos, y muestra una estructura cortical homogénea y resistiva que se prolonga hacia la cuenca del Duero. En esta corteza aparecen cuerpos conductores inclinados y alargados en profundidad asociados a grandes cabalgamientos alpinos. Otros cuerpos conductores superficiales están claramente relacionados con las cuencas sedimentarias terciariasItem Análisis de la sensibilidad de las estimaciones de la profundidad del basamento en la cuenca de Madrid (España Central)(Geotemas, 2012) Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Gascone, L.; De Vicente Muñoz, Gerardo; Mantilla Pimiento, A.The Madrid basin, over 20.000 km2 , located in Central Spain. Its evolution is conditioned by basement uplifts (Central System and Toledo Mountains) during the Alpine orogeny. The Madrid basin is connected with the Loranca basin at its NE corner and with La Mancha basin to the south. Sediment thickness accumulated from Late Cretaceous to the Late Miocene, is about 3.000 m at Pradillo well, but from seismic interpretation, a depocenter associated to Central System South Thrust is inferred. For this study four different methodologies were used(“Euler Deconvolution”, “Source Parameter Imaging”, “Analytic Signal” and “Tilt Depth”), in order to obtain depth to basement estimations from aermagnetic data. These methods work for simplified source geometries, estimating depths as a good starting point for a structural interpretation. In Madrid Basin, this knowledge is important due to the geothermal and hydrological potential of the basin, as well as for CO2 storage. [RESUMEN]La cuenca de Madrid, con un área aproximada de 20.000 km2, se extiende en la zona central de la Península Ibérica. Su evolución está condicionada por el levantamiento del Sistema Central y de los Montes de Toledo durante la orogenia Alpina. La cuenca de Madrid está conectada con las cuencas de Loranca, en su límite NE, y de La Mancha por el sur. El espesor de sedimentos, con registro continuo desde el Cretácico Superior hasta el Mioceno Superior, alcanza los 3000 m en el pozo Pradillo, aunque de la interpretación sísmica se obtiene un depocentro, de mayor profundidad, adosado al cabalgamiento del Borde Sur del Sistema Central . En este trabajo se han seguido distintas metodologías para estimar la profundidad del basamento, a partir de datos aeromagnéticos. Los distintos métodos (“Deconvolucion de Euler”, “Source Parameter Imaging”, “Analytic Signal” y “Tilt Depth”) tienen en común que asumen geometrías sencillas, pero los resultados obtenidos resultan de gran interés para la interpretación estructural del basamento. En el caso de la cuenca de Madrid, este conocimiento es muy importante dado su potencial geotérmico e hidrogeológico, así como un posible uso como almacenamiento geológico.Item Present-Day Crustal Stress Field from Gcmt Focal Mechanisms Based on the Slip Model.(Conference Proceedings, 83rd EAGE Annual Conference & Exhibition, 2022) Olaiz Campos, J. A.; Muñoz Martín, Alfonso; De Vicente Muñoz, GerardoThe Slip Model is applied to the Global Centroid Moment Tensor database to determine the present day state of stress. Thus, from each focal mechanism the horizontal shortening direction (Dey) and the shape factor of the strain ellipsoid (k`), defined as the relationship between the maximum horizontal shortening and the vertical axis, are calculated. Additionally, this method proposed the neoformed plane from the calculated nodal planes. In this study, to determine the stress configuration at crustal scale, only depths < 40 km are included. Focal mechanisms are grouped in reverse, strike-slip and normal, to analyse its distribution and to determine the b-parameter from Gutenberg-Richter law. Finally, global shape factor and horizontal shortening direction maps are presented.Item Kink bands alpinos en rocas foliadas del basamento varisco del Sistema Central(Geogaceta, 2021) De Vicente Muñoz, Gerardo; Muñoz Martín, Alfonso; Díez Fernández, Rubén; Olaiz Campos, J. A.La asociación espacial y cinemática entre kink bands en rocas con foliación varisca y cabalgamientos alpinos en el basamento del Sistema Central, permiten deducir que los primeros tienen una edad cenozoica, y no varisca o tardivarisca. Sistemáticamente, la dirección de los ejes de los kinks es subparalela a los cabalgamientos. Se estudian tres afloramientos clave: El Cabalgamiento de Villares de Jadraque, el Cabalgamiento de Valdesotos y el Retrocabalgamiento de El Atazar.Item Structural Achitecture of the Madrid Basin from 3D Gravity Inversion(Conference Paper. 77th EAGE Conference & Exhibition 2015, 2015) Olaiz, A.J.; Mantilla Pimiento, A.; Muñoz Martín, Alfonso; De Vicente Muñoz, GerardoThe Madrid Basin is an intraplate Cenozoic basin located in the central area of the Iberian Peninsula. Basement is characterized by a wide range of lithologies, from meta-sediments to granites. Sedimentary section is associated with a carbonatic platform in Cretaceous time and with continental environments during Tertiary. During the second half of the last century 2D seismic data was acquired and some wells were drilled by several oil & gas companies. Due to the lack of refraction seismic, the geometry of the Moho is not very well-known in the area. This study presents the results of the 3D gravity inversion performed mainly to determine the configuration of the Moho. Also, the geometry of basement has been refined after the inversion. The initial model was constrained by surface geology, 2D seismic and well data. The final 3D model shows significant density variations within the basement and the presence of an intra-basement structure in the Central Iberian System.Item Using river long profiles and geomorphic indices to evaluate the geomorphological signature of continental scale drainage capture, Duero basin (NW Iberia)(Geomorphology, 2013) Antón López, Loreto; De Vicente Muñoz, Gerardo; Muñoz Martín, Alfonso; Stokes, MartinWell-constrained case studies of transient landscape responses are needed to improve our understanding of erosion processes associated with drainage captures. The Duero basin is an excellent location for such a study because the landscape is currently undergoing pronounced geomorphological changes resulting from the opening of a former closed drainage. The present-day continental interior basin (N50,000 km2) drains to the Atlantic Ocean via the Duero River, but during the Cenozoic the basin experienced a long endorheic period marked by the formation of evaporites. Currently, the entire continental interior is an area of relative tectonic quiescence, characterised by a relict low-relief upland topography (Meseta). Systematic variations in lithology and a well-constrained tectonic setting throughout the basin and adjacent areas allow for the comparison of channel morphology between the Cenozoic Duero basin and its western fringe. To explore the signal of transient geomorphic response to capture and opening of the former endorheic basin, the main channel and 24 tributaries were analysed in terms of their longitudinal profiles and the application of geomorphic indices (concavity index [Ci], valley floorwidth-to-height ratio [Vf], and stream-length gradient index [SL]). The analysis reveals two zones with distinctive morphologies: (1) an upper reach domain consisting of broad flat valleys and low-gradient streams where concave longitudinal profiles dominate and (2) a middle reach domain characterised by steep, deeply incised canyons where a convex long profile dominates marking a major kinckzone. The quantitative information on channel shapes and long profile geometries allows the interpretation of these patterns in terms of driving forces for fluvial landscape development. Large-scale morphometric analysis highlights the transient response of the entire basin to a capture-related base level lowering and illustrates the importance of drainage captures as potential internal drivers of landscape modification and topographic adjustments. Furthermore, the Duero basin case study also emphasises that well-constrained bedrock geology and tectonic patterns are essential to avoid misinterpretation of geomorphic indexes.Item Variscan inheritance induces Alpine upper crustal delamination in East Spanish–Portuguese Central System(Tectonics, 2022) De Vicente Muñoz, Gerardo; Díez Fernández, Rubén; Olaiz Campos, Antonio José; Muñoz Martín, AlfonsoThe Spanish–Portuguese Central System (SPCS) is an Alpine Mountain range with crystalline basement characterised by a two-layer rheological structure. This structure formed after primary (protolith) and secondary (tectonometamorphic) processes during the extensional collapse of the Variscan Orogen. The SPCS structure is usually controlled by foreland-directed thrusts and strike-slip faults. However, the eastern SPCS is dominated by NW-directed, imbricate backthrusts and lacks the main thrust directed to the foreland basin located southeast of the mountain range (Madrid Cenozoic Basin). The SPCS exhibits a crustal root (> 40 km depth) supporting SE-directed crustal-scale thrusting. Alpine backthrusts sole into an SE-dipping décollement within the Variscan basement. Variscan extension-related structures parallel the SE-dipping geometry of Alpine backthrusts, so they provided favourably oriented rheological weaknesses to accommodate Alpine shortening. Backthrusts geometry, their hanging wall position within the fault that raised the SPCS and gravity modelling support an Alpine crustal delamination process. Tectonic wedging and delamination of the more competent basement occurred in the footwall of Variscan extensional faults (Daurius domain), which enforced the shearing off of a rheologically weaker upper layer of the crust, located in the hanging wall of the Variscan extensional faults (Arriaca domain) by inverting Variscan extensional faults. This led to NW-directed incipient continental subduction of the weaker crust. Intraplate subduction and crustal delamination can be independent from lithosphere-scale inheritance and be conditioned by structural inheritance in the overlying crust. Alpine shortening for the Cretaceous cover is around 17.7 km (10.5% shortening), and 11 km (7%) for the upper-lower crust limit.