Person: Muñoz Martín, Alfonso
Loading...
First Name
Alfonso
Last Name
Muñoz Martín
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Geológicas
Department
Geodinámica, Estratigrafía y Paleontología
Area
Geodinámica Interna
Identifiers
8 results
Search Results
Now showing 1 - 8 of 8
Item Quantifying the erosional impact of a continental-scale drainage capture in the Duero Basin, northwest Iberia(Quaternary Research, 2018) Antón López, Loreto; Muñoz Martín, Alfonso; De Vicente Muñoz, GerardoFormerly closed drainage basins provide exceptional settings for quantifying fluvial incision and landscape dissection at different time scales. Endorheic basins trap all the sediment eroded within the watershed, which allows estimates of post–basin opening erosion patterns. The Duero Basin was a former closed basin and is presently drained by the Duero River into the Atlantic Ocean. During the Cenozoic, the basin experienced a long endorheic period, marked by the formation of continental carbonates and evaporites. The retrogressive erosion of the Atlantic drainage coming from the Portuguese coast subsequently captured the internal drainage, and significant fluvial dissection occurred. Presently, the basin contains a relatively well-preserved sedimentary fill. Gridding and surface fitting in this paper provide the first attempt to reconstruct the surface of the top of the former endorheic sedimentary sequence to quantify the erosional impact of the basin opening. At least 2251±524 km3 of sediment was removed from the formerly closed basin following the start of exorheism. This volume represents a mean basin-surface lowering of 65±13 m. Erosion estimates and landscape dissection patterns are consistent with geologic evidence of progressive establishment of an outward drainage system.Item Longest and still longer: The Messejana-Plasencia dyke and its links with later Alpine deformation belt in Iberia(Tectonophysics, 2021) De Vicente Muñoz, Gerardo; Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Cunha, Pedro P.The Messejana-Plasencia dyke (End-Triassic), NE-SW oriented, is the longest simple structure in Iberia (~500 km) and constitutes a first-order rheological discontinuity that crosses the entire crust. During the Alpine deformation, this discontinuity nucleated the Messejana-Plasencia left-lateral strike-slip fault and its related strike-slip deformation belt, consisting of a series of wide coalescent stepovers and small basins developed on the footwalls. Both structures can be followed from offshore of SW mainland Portugal to the central sector of the Spanish-Portuguese Central System. Using tectonic, geophysical, magnetic, and gravimetric analyses, our study demonstrated that it extends NE more than ~100 km below the continental sediments of the Duero Cenozoic Basin, until the Iberian Chain. We used a tectonostratigraphic analysis to determine the age of the wrench fault movement and that of the Spanish-Portuguese thrusts. In this range, the largest displacement during the Cenozoic occurred in the southern thrust of the Spanish sector of the Central System over the Madrid Cenozoic Basin, and NE-SW trending. This thrust displaces the Moho more than 10 km and probably joins the Messejana-lasencia strike-slip fault at depth. The deduced age movement for both is Oligocene-Lower-Middle Miocene, related to the intraplate stresses transmitted from the Pyrenean orogen towards its foreland. A strain partitioning process was then deduced for the simultaneous movement of both main Alpine faults in Central Iberia.Item Present-Day Crustal Stress Field from Gcmt Focal Mechanisms Based on the Slip Model.(Conference Proceedings, 83rd EAGE Annual Conference & Exhibition, 2022) Olaiz Campos, J. A.; Muñoz Martín, Alfonso; De Vicente Muñoz, GerardoThe Slip Model is applied to the Global Centroid Moment Tensor database to determine the present day state of stress. Thus, from each focal mechanism the horizontal shortening direction (Dey) and the shape factor of the strain ellipsoid (k`), defined as the relationship between the maximum horizontal shortening and the vertical axis, are calculated. Additionally, this method proposed the neoformed plane from the calculated nodal planes. In this study, to determine the stress configuration at crustal scale, only depths < 40 km are included. Focal mechanisms are grouped in reverse, strike-slip and normal, to analyse its distribution and to determine the b-parameter from Gutenberg-Richter law. Finally, global shape factor and horizontal shortening direction maps are presented.Item Kink bands alpinos en rocas foliadas del basamento varisco del Sistema Central(Geogaceta, 2021) De Vicente Muñoz, Gerardo; Muñoz Martín, Alfonso; Díez Fernández, Rubén; Olaiz Campos, J. A.La asociación espacial y cinemática entre kink bands en rocas con foliación varisca y cabalgamientos alpinos en el basamento del Sistema Central, permiten deducir que los primeros tienen una edad cenozoica, y no varisca o tardivarisca. Sistemáticamente, la dirección de los ejes de los kinks es subparalela a los cabalgamientos. Se estudian tres afloramientos clave: El Cabalgamiento de Villares de Jadraque, el Cabalgamiento de Valdesotos y el Retrocabalgamiento de El Atazar.Item Variscan inheritance induces Alpine upper crustal delamination in East Spanish–Portuguese Central System(Tectonics, 2022) De Vicente Muñoz, Gerardo; Díez Fernández, Rubén; Olaiz Campos, Antonio José; Muñoz Martín, AlfonsoThe Spanish–Portuguese Central System (SPCS) is an Alpine Mountain range with crystalline basement characterised by a two-layer rheological structure. This structure formed after primary (protolith) and secondary (tectonometamorphic) processes during the extensional collapse of the Variscan Orogen. The SPCS structure is usually controlled by foreland-directed thrusts and strike-slip faults. However, the eastern SPCS is dominated by NW-directed, imbricate backthrusts and lacks the main thrust directed to the foreland basin located southeast of the mountain range (Madrid Cenozoic Basin). The SPCS exhibits a crustal root (> 40 km depth) supporting SE-directed crustal-scale thrusting. Alpine backthrusts sole into an SE-dipping décollement within the Variscan basement. Variscan extension-related structures parallel the SE-dipping geometry of Alpine backthrusts, so they provided favourably oriented rheological weaknesses to accommodate Alpine shortening. Backthrusts geometry, their hanging wall position within the fault that raised the SPCS and gravity modelling support an Alpine crustal delamination process. Tectonic wedging and delamination of the more competent basement occurred in the footwall of Variscan extensional faults (Daurius domain), which enforced the shearing off of a rheologically weaker upper layer of the crust, located in the hanging wall of the Variscan extensional faults (Arriaca domain) by inverting Variscan extensional faults. This led to NW-directed incipient continental subduction of the weaker crust. Intraplate subduction and crustal delamination can be independent from lithosphere-scale inheritance and be conditioned by structural inheritance in the overlying crust. Alpine shortening for the Cretaceous cover is around 17.7 km (10.5% shortening), and 11 km (7%) for the upper-lower crust limit.Item Maribno Amphibious Project: Role of the Inherited Tectonics in the Structure of the Northwestern Iberian Margin(Conference Proceedings, 83rd EAGE Annual Conference & Exhibition, 2022) Muñoz Martín, Alfonso; Granja Bruña, José Luis; De La Fuente Oliver, Miguel Ángel; Druet Vélez, María; De Vicente Muñoz, Gerardo; Gallastegui, Jorge; Maestro, AdolfoNew energy demand linked to world population growth and awareness about climate change have brought out the need to develop new forms of energy guided by the urgency of an ecological transition. In this context geothermal resources have the potential of contributing significantly to sustainable use in many parts of the world. In Spain, during the 80´s, oil and gas explorations carried out in the Madrid Basin confirmed the existence of two geothermal reservoirs. Here we present diverse geological features of the basin essential in geothermal exploration. We use airborne radiogenic and magnetic data to characterize the basement. Detailed ground concentration estimates of the heat producing elements are used to calculate the heat production and heat flow in the near surface. The distribution pattern of both parameters is heterogeneous with two main areas separated by southward prolongation of the Berzosa Fault. The eastern sector is characterized by both low heat production and heat flow rates while the western area is distinguished by high values as a response of the exposed granites. In addition, we build one 3D geological model and one 3D isothermal model with Leapfrog Geothermal from seismic, well data and mapping information.Item La deformación alpina en el Sistema Central Español(Geo-guías, Rutas geológicas por la Península Ibérica, Canarias, Sicilia y Marruecos, 2019) De Vicente Muñoz, Gerardo; Muñoz Martín, Alfonso; Olaiz, A.J.; Vegas Martínez, Ramón; Antón López, Loreto; Martín Velázquez, Silvia; Giner Robles, Jorge Luis; Rodriguez Pascua, M.A.La idea del origen compresivo del Sistema Central (SC) se debe a Birot y Solé Sabarís (1954) [1], antes del establecimiento del papel que la tectónica de placas juega en el desarrollo de las estructuras intraplaca. Sin embargo, sus observaciones de campo no fueron tenidas en cuenta y, durante mucho tiempo, el SC fue considerado como una estructura extensiva [2]. Los primeros modelos de estructura del SC, en un contexto compresivo intraplaca, fueron propuestos por Vegas y Suriñach (1987) [3], que calcularon un engrosamiento cortical de 5 km, mientras que Warburton y Álvarez (1989) [4] construyeron una sección transversal con el desarrollo de una tectónica de piel fina asociada a un detachment intracortical proveniente de las Béticas y con un acortamiento asociado de 50 km. Esta idea fue también propuesta con menos detalle para el sector portugués, pero en relación a un estilo tectónico de piel gruesa y un acortamiento menor [5]. No obstante, estos trabajos carecían de observaciones de campo. En concreto, la sección de Warburton y Álvarez adolece de numerosas inconsistencias. El estilo tectónico propuesto durante la celebración de la III reunión de la Comisión de Tectónica de la SGE, que es el que se tiene en cuenta hoy en día, fue el de una tectónica de piel gruesa, sin despegues en la cobertera, con la formación de cabalgamientos imbricados de piel fina con implicación del basamento y pop ups dentro del basamento varisco de direcciones NE-SO a E-O. El acortamiento asociado se calculó en un 14% (20 km) [6, 7].Item The Spanish-Portuguese Central System: An Example of Intense Intraplate Deformation and Strain Partitioning(Tectonics, 2018) De Vicente Muñoz, Gerardo; Cunha, P.P.; Muñoz Martín, Alfonso; Cloetingh, S.A.P.L.; Olaiz Campos, Antonio José; Vegas Martínez, RamónThe intraplate deformation of Iberia during the Cenozoic produced a series of ranges and deformation belts with a wide variety of structural trends. The Spanish-Portuguese Central System is the most prominent feature crossing over the whole of central Iberia. It is a large thick-skinned crustal pop-up with NE-SW to E-W thrusts. However, the 500-km-long left-lateral strike-slip Messejana-Plasencia fault, also NE-SW oriented, bends these thrusts to produce NE-SW local paleostresses close to the fault, which seems to be consistent with a common deformational arrangement. This is also supported by the similar sedimentary infilling characteristics found in the surrounding Cenozoic basins. The moment of the maximum intraplate deformation is registered at the same time in all these basins during the upper Priabonian-lower Chattian. As there are two possible sources for the intraplate compressive stresses, the Pyrenean (N-S shortening) orogen to the north and the Betic (NW-SE shortening) orogen to the south, neither can simply explain both simultaneous movements (NE-SW strike-slip and NE-SW thrusting). The deduced age of the main deformation indicates a Pyrenean origin. In contrast, the concept of strain partitioning between the two types of faults gives as a result an overall north trending compression. Existing data do not support crustal detachment from the Betics neither from the Pyrenees but are consistent with a crustal uplift related to lithospheric folding. The subsequent Betic-related stress field only slightly reworked previously Pyrenean-related structures, except for the Portuguese sector, where tectonic activity occurred mainly in the Upper Miocene.