Person:
Muñoz Martín, Alfonso

First Name

Alfonso

Last Name

Muñoz Martín

URI

https://hdl.handle.net/20.500.14352/75220

Affiliation

Universidad Complutense de Madrid

Faculty / Institute

Ciencias Geológicas

Department

Geodinámica, Estratigrafía y Paleontología

Area

Geodinámica Interna

Identifiers

Full item page

Search Results

Now showing 1 - 10 of 23

Sobre el origen de la asimetría en el patrón general del relieve en el interior de la Península Ibérica: nuevos resultados obtenidos mediante modelación análoga
(Geogaceta, 2010) Fernández Lozano, Javier; Sokoutis, Dimitrios; Willingshofer, Ernst; Muñoz Martín, Alfonso; De Vicente Muñoz, Gerardo; Cloetingh, Sierd
Analogue modelling contributes to the interpretation of lithosphere scale folds in Iberia as a result of largescale convergence during Oligocene-Miocene times between the Iberian and European Plates. Different tectonothermal events affected the microplate since late Paleozoic and resulted in lateral strength variations of the Iberian lithosphere. An old and cold lithosphere, Variscan in age, can be found in the westernmost part of Iberia whereas a relative weak and hot Mesozoic lithosphere affected by episodes of rifting and basin inversion during Mesozoic- Tertiary times covers the area of the Iberian Chain. Our study aims at deciphering whether deformation and topography evolution in Iberia are related to lateral strength variations and/or the inherited structural grain stemming from Variscan deformation. We also have studied the strength of the lithosphere to gain insights into the effects of rheological variations related to local thrusting or primary strength variations along the Iberian lithosphere.
Aplicación del método de resistividades con SEV para la caracterización hidrogeológica de la cuenca de Dajla (Argelia)
(Geogaceta, 2010) Torres López, Sara; Muñoz Martín, Alfonso; Jiménez Díaz, Alberto; Ahmed, Baba; De lorenzo, Javier; García López, Cristina; Olaiz Campos, Antonio José
The aim of this study is the hydrogeological exploration and characterization using Geophisical surveying in the vicinity of Dakhla Basin (Algeria). To that end, it has been used the method of resistivities through Vertical Electric Sounding (VES) on a campaign carried out in April 2009. The work included 19 VES, which have been calibrated with existing wells and with field geological observations. The results have allowed the characterization of Tertiary deposits as well as Ordovician sandstones. With these data, it has been possible to identify the position and thickness of a shallow salty aquifer, and the roof of a deep freshwater aquifer developed on the Ordovician sandstones. The integration of the geometry of the aquifers with the resistivity values obtained in the Ordovician sandstones has allowed the location of a favorable area for the situation of a new well.
Una década de investigación sobre el geopotencial
(Investigación y ciencia, 2011) Catalán, Manuel; Muñoz Martín, Alfonso
Análisis de la estructura alpina de la corteza del centro de la Península Ibérica: Una sección Magneto-Telúrica a través del Sistema Central (Sierra de Gredos)
(Geotemas, 2012) Pous, Jaume; Muñoz Martín, Alfonso; Olaiz Campos, Antonio José; Seillé, H.; De Vicente Muñoz, Gerardo
We present a magnetotelluric profile across the Duero basin, the Central System and the Madrid basin, acquired in the framework of the TOPO-IBERIA project. The MT profile consists of 24 magnetotelluric sites over a 200 km, NS oriented profile. Five components were measured with periods ranging from 0.001 s to 500s. The dimensional analysis reveals a dominant E-W direction and 2D joint inversion of apparent resistivity, phases and tipper was carried out. The inverse resistivity model obtained has been compared with other geological and geophysical data, and it shows a resistive and homogeneous crust that extends towards the Duero basin. The main conductive anomalies are elongated and inclined bodies that are related with the main big–scale Alpine thrusts. Other superficial conductive bodies are related with the tertiary sedimentary basins. [RESUMEN]Este trabajo muestra un nuevo perfil magnetotelúrico (MT) a través del la cuenca del Duero, el Sistema central y la Cuenca de Madrid, adquirido dentro del proyecto TopoIberia. El Perfil MT consiste en 24 sondeos a lo largo de 200 km con una orientación NS. En cada sondeo se han medido cinco componentes con periodos de 0.001 a 500 s. El análisis dimensional revela una dirección dominante E-O y se ha realizado una inversión conjunta en 2D de las resistividades aparentes, fases y tipper. El modelo de resistividades obtenido ha sido comparado con otros datos geológicos y geofísicos, y muestra una estructura cortical homogénea y resistiva que se prolonga hacia la cuenca del Duero. En esta corteza aparecen cuerpos conductores inclinados y alargados en profundidad asociados a grandes cabalgamientos alpinos. Otros cuerpos conductores superficiales están claramente relacionados con las cuencas sedimentarias terciarias
Análisis de la sensibilidad de las estimaciones de la profundidad del basamento en la cuenca de Madrid (España Central)
(Geotemas, 2012) Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Gascone, L.; De Vicente Muñoz, Gerardo; Mantilla Pimiento, A.
The Madrid basin, over 20.000 km2 , located in Central Spain. Its evolution is conditioned by basement uplifts (Central System and Toledo Mountains) during the Alpine orogeny. The Madrid basin is connected with the Loranca basin at its NE corner and with La Mancha basin to the south. Sediment thickness accumulated from Late Cretaceous to the Late Miocene, is about 3.000 m at Pradillo well, but from seismic interpretation, a depocenter associated to Central System South Thrust is inferred. For this study four different methodologies were used(“Euler Deconvolution”, “Source Parameter Imaging”, “Analytic Signal” and “Tilt Depth”), in order to obtain depth to basement estimations from aermagnetic data. These methods work for simplified source geometries, estimating depths as a good starting point for a structural interpretation. In Madrid Basin, this knowledge is important due to the geothermal and hydrological potential of the basin, as well as for CO2 storage. [RESUMEN]La cuenca de Madrid, con un área aproximada de 20.000 km2, se extiende en la zona central de la Península Ibérica. Su evolución está condicionada por el levantamiento del Sistema Central y de los Montes de Toledo durante la orogenia Alpina. La cuenca de Madrid está conectada con las cuencas de Loranca, en su límite NE, y de La Mancha por el sur. El espesor de sedimentos, con registro continuo desde el Cretácico Superior hasta el Mioceno Superior, alcanza los 3000 m en el pozo Pradillo, aunque de la interpretación sísmica se obtiene un depocentro, de mayor profundidad, adosado al cabalgamiento del Borde Sur del Sistema Central . En este trabajo se han seguido distintas metodologías para estimar la profundidad del basamento, a partir de datos aeromagnéticos. Los distintos métodos (“Deconvolucion de Euler”, “Source Parameter Imaging”, “Analytic Signal” y “Tilt Depth”) tienen en común que asumen geometrías sencillas, pero los resultados obtenidos resultan de gran interés para la interpretación estructural del basamento. En el caso de la cuenca de Madrid, este conocimiento es muy importante dado su potencial geotérmico e hidrogeológico, así como un posible uso como almacenamiento geológico.
Análisis de esfuerzos tectónicos. Fallas y sismos
(Reduca. Geología, 2010) Muñoz Martín, Alfonso; Vicente Muñoz, Gerardo De
La Tectónica de Placas implica una continua deformación de la Litosfera (y de la corteza superior frágil). Esta dinámica produce un campo de esfuerzos tectónicos íntimamente ligado a las estructuras activas que generan sismicidad: las fallas. El proceso de fracturación puede analizarse desde distintas perspectivas: Mecánica de Rocas, Sismología, Geología Estructural, modelado (análogo y numérico), etc. En estos apuntes abordamos el estudio del estado de esfuerzos tectónicos (activos o paleoesfuerzos), a partir del análisis de fallas desde las distintas ideas complementarias que aportan estas disciplinas. Comenzamos con una breve descripción del origen de los esfuerzos tectónicos para abordar después los conceptos mecánicos básicos, comenzando con la definición y propiedades del tensor de esfuerzos. Continuamos con el análisis de la rotura en roca intacta (fricción interna) y en roca previamente fracturada (fricción al deslizamiento). Seguidamente exponemos las ideas fundamentales que aporta la Geofísica (Sismología), comenzando con la descripción de las ondas sísmicas y terminando con el mecanismo focal de los terremotos. Acto seguido, analizamos las relaciones entre los mecanismos focales y las fallas para describir después lo que puede aportar la Geología Estructural desde el análisis de las microestructuras frágiles (estrías, venas, estilolitos). Todos estos conceptos convergen al final en el apartado de "Análisis de poblaciones de fallas y métodos de obtención del tensor de esfuerzos", donde se exponen tres métodos de inversión (Diedros rectos, Modelo de Deslizamiento y ecuación de Bott). Por último, se analiza como ejemplo el estado de esfuerzos tectónicos activos entre la Dorsal de Terceira, Iberia y Argelia, con especial atención a la Península Ibérica.
Análisis de los esfuerzos tectónicos de la crisis sísmica de 2010 en Haití
(Geogaceta, 2014) López Cuesta, Víctor; Muñoz Martín, Alfonso; Granja Bruña, José Luis
El evento de Mw=7 del 12 de enero 2010 provocó una crisis sísmica en el sur de Haití, que duró 3 meses. Se ha realizado un análisis de inversión de esfuerzos de los mecanismos focales del evento principal y 50 réplicas. El evento principal fue generado por un falla de buzamiento 64ºN y dirección N084Eº con una componente principal de deslizamiento lateral-izquierda y una componente inversa. Las réplicas se han generado por fallas inversas puras ENE-OSO situadas en la zona de interacción entre estructuras compresivas orientadas NO-SE y de desgarre orientadas E-O. Estas réplicas han sido activadas por un régimen de esfuerzos compresivo uniaxial muy homogéneo orientado con σ1 horizontal según N017ºE ±10º. La ausencia de ruptura en superficie indica que el origen de las réplicas son fallas ciegas orientadas N097º-117ºE. Los datos de deformación superficial intersísmica obtenidos a partir de velocidades derivadas de GPS para la zona epicentral muestran una desviación angular de ≈30º respecto a la orientación de σ1 obtenidos del análisis de esfuerzos. Esta desviación sugiere que una parte significativa de la energía elástica acumulada a lo largo de las estructuras de tendencia E-O no fue liberada durante la crisis sísmica de 2010.
Using river long profiles and geomorphic indices to evaluate the geomorphological signature of continental scale drainage capture, Duero basin (NW Iberia)
(Geomorphology, 2013) Antón López, Loreto; De Vicente Muñoz, Gerardo; Muñoz Martín, Alfonso; Stokes, Martin
Well-constrained case studies of transient landscape responses are needed to improve our understanding of erosion processes associated with drainage captures. The Duero basin is an excellent location for such a study because the landscape is currently undergoing pronounced geomorphological changes resulting from the opening of a former closed drainage. The present-day continental interior basin (N50,000 km2) drains to the Atlantic Ocean via the Duero River, but during the Cenozoic the basin experienced a long endorheic period marked by the formation of evaporites. Currently, the entire continental interior is an area of relative tectonic quiescence, characterised by a relict low-relief upland topography (Meseta). Systematic variations in lithology and a well-constrained tectonic setting throughout the basin and adjacent areas allow for the comparison of channel morphology between the Cenozoic Duero basin and its western fringe. To explore the signal of transient geomorphic response to capture and opening of the former endorheic basin, the main channel and 24 tributaries were analysed in terms of their longitudinal profiles and the application of geomorphic indices (concavity index [Ci], valley floorwidth-to-height ratio [Vf], and stream-length gradient index [SL]). The analysis reveals two zones with distinctive morphologies: (1) an upper reach domain consisting of broad flat valleys and low-gradient streams where concave longitudinal profiles dominate and (2) a middle reach domain characterised by steep, deeply incised canyons where a convex long profile dominates marking a major kinckzone. The quantitative information on channel shapes and long profile geometries allows the interpretation of these patterns in terms of driving forces for fluvial landscape development. Large-scale morphometric analysis highlights the transient response of the entire basin to a capture-related base level lowering and illustrates the importance of drainage captures as potential internal drivers of landscape modification and topographic adjustments. Furthermore, the Duero basin case study also emphasises that well-constrained bedrock geology and tectonic patterns are essential to avoid misinterpretation of geomorphic indexes.
Denitrification in a hypersaline lake–aquifer system (Pétrola Basin, Central Spain): The role of recent organic matter and Cretaceous organic rich sediments
(Science of the total environment, 2014) Gómez Alday, J.J.; Carrey, R.; Valiente, Nicolás; Otero, Neus; Soler, A.; Ayora, C.; Sanz Bas, David; Muñoz Martín, Alfonso; Castaño, S.; Recio, C.; Carnicero, A.; Cortijo, A.
Agricultural regions in semi-arid to arid climates with associated saline wetlands are one of the most vulnerable environments to nitrate pollution. The Pétrola Basin was declared vulnerable to NO3 − pollution by the Regional Government in 1998, and the hypersaline lake was classified as a heavily modified body of water. The study assessed groundwater NO3 − through the use of multi-isotopic tracers (δ15N, δ34S, δ13C, δ18O) coupled to hydrochemistry in the aquifer connected to the eutrophic lake. Hydrogeologically, the basin shows two main flow components: regional groundwater flow from recharge areas (Zone 1) to the lake (Zone 2), and a density-driven flow from surface water to the underlying aquifer (Zone 3). In Zones 1 and 2, δ15NNO3 and δ18ONO3 suggest that NO3 − from slightly volatilized ammonium synthetic fertilizers is only partially denitrified. The natural attenuation of NO3 − can occur by heterotrophic reactions. However, autotrophic reactions cannot be ruled out. In Zone 3, the freshwater–saltwater interface (down to 12–16 m below the ground surface) is a reactive zone for NO3 − attenuation. Tritium data suggest that the absence of NO3 − in the deepest zones of the aquifer under the lake can be attributed to a regional groundwater flow with long residence time. In hypersaline lakes the geometry of the density-driven flow can play an important role in the transport of chemical species that can be related to denitrification processes.
Spectral analysis of the gravity and elevation along the western Africa–Eurasia plate tectonic limit: Continental versus oceanic lithospheric folding signals
(Tectonophysics, 2010) Muñoz Martín, Alfonso; De Vicente Muñoz, Gerardo; Fernández Lozano, Javier; Cloetingh, Sierd; Willingshofer, Ernst; Sokoutis, Dimitrios; Beekman, Fred
Large-scale folding is a key mechanism of lithospheric deformation and has been described in many parts of the Earth, both for the continental and oceanic lithospheres. Some aspects of this process such as the presence of coupling/decoupling between the crustal deformation and the mantle lithosphere, or between different lithospheres, make it necessary to accurately control the periodic characteristics of the elevation and of the gravity signal. 1D spectral analysis of gravity and topography profiles is sensitive to a series of factors: the location, length and orientation of the profiles, as well as the number of samples taken. We carry out a systematic analysis of the periodicities in the topography and gravity, both 1D and 2D, along the western border of the Africa–Eurasia plate tectonic boundary. We analyze the sensitivity of the 1D and 2D spectral analysis in order to compare the results along a plate boundary where oceanic and continental lithospheres are in contact with different tectonic, kinematic and rheological aspects. Our 1D spectral results indicate that the greater the profile length, the longer the wavelength peaks that are found. Nevertheless there are some periodic signals that appear in almost all the analyzed profiles: 100–250 km for the N–S profiles across oceanic plate boundary and 150–250 km where the plate boundary is developed over continental lithospheres. The 2D spectral analysis avoids the problems found in relation to the particular location of the profile but the resulting wavelengths are slightly higher than those obtained from the 1D spectral analysis. The wavelengths estimated for both oceanic and continental lithospheres at the Africa–Eurasia boundary (N250 km) show low values of mean mantle strength (b1013 Pa m). he presence of lithospheric folds means that the continental and oceanic lithospheres are mechanically oupled. This had previously been suggested for Iberia but not for the limit between S Iberia and the Terceira riple Junction. The orientation of the lithospheric folds is NW–SE at the contact between continental lithospheres and NNE–SSW at the contact between oceanic lithospheres. This difference is also reflected in the signal anisotropy and must be related to the rotation of the tectonic stresses in the same direction. A large periodic signal (wavelength N600 km) was also detected both in 1D and 2D spectral results. After drawing the filtered values, the resulting maps indicate that this signal is related to the transition between continental and oceanic lithospheres and to the significant changes in crustal and/or lithospheric thickness from the Mid-Atlantic Ridge to the continental margins of western Eurasia.