Person:
Muñoz Martín, Alfonso

First Name

Alfonso

Last Name

Muñoz Martín

URI

https://hdl.handle.net/20.500.14352/75220

Affiliation

Universidad Complutense de Madrid

Faculty / Institute

Ciencias Geológicas

Department

Geodinámica, Estratigrafía y Paleontología

Area

Geodinámica Interna

Identifiers

Full item page

Search Results

Now showing 1 - 10 of 16

Análisis integrado de la topografía y anomalías graviméticas en modelación análoga: un modelo de evolución del relieve en la Península Ibérica
(Revista de la Sociedad Geológica de España, 2011) Fernández-Lozano, Javier; Sokoutis, Dimitrios; Willingshofer, Erns; Muñoz Martín, Alfonso; Vicente Muñoz, Gerardo de; Cloetingh1, Sierd
El análisis integrado de la topografía y las anomalías gravimétricas en la Península Ibérica invoca a la presencia de grandes pliegues que afectan a toda la litosfera como precursores de los relieves E-O a NE-SO que se distribuyen por el Macizo Varisco, así como a un mecanismo de engrosamiento cortical nucleado a partir de fallas Tardi-Variscas, como origen del relieve del este peninsular (Cadena Ibérica-Costero Catalana), con patrones dominantes E-O, NE-SO y NO-SE. El modo de deformación, así como el estilo, dependen tanto de las propiedades reológicas iniciales de una litosfera a otra (litosfera resistente Varisca hacia el oeste peninsular/litosfera débil y caliente resultado de la extensión Mesozoica hacia el este) como a los accidentes tectónicos pre-existentes. Presentamos una nueva metodología aplicada a la modelación análoga, basada en el estudio del espectro de las anomalías gravimétricas y la topografía que nos han permitido inferir los procesos responsables de la asimetría en el patrón del relieve intra-placa de la Península Ibérica. A su vez, nuestros resultados arrojan luz sobre los mecanismos generadores del relieve en zonas de intra-placa donde la escasez o falta de resolución de los perfiles sísmicos y geomagnéticos impide la interpretación de la parte más profunda de la litosfera como Asia Central o los Atlas del norte de África.
Análisis de la geometría en profundidad de fracturas conductoras en zonas de baja permeabilidad mediante tomografía eléctrica (El Berrocal, Sistema Central Español)
(Geogaceta, 2007) Muñoz Martín, Alfonso; Olaiz Campos, Antonio José; Vicente Muñoz, Gerardo de; Antón López, Loreto; Elorza, Francisco José; Vicente, Raquel de
The groundwater flow in zones of low permeability, as granites, is mainly associated with zones of fracture. For this reason the characterization of the fractures is fundamental, both in surface as in depth, and must integrate geological information (geological mapping, structural analysis), geophysics (mainly electrical and electromagnetic methods) and geochemistry (radon and others gases) with hydrogeology. In this work we analyze the geophysical response of a strike-slip fault zone by means of three 2D resistivity models. The objective is to investigate the presence of several conductive zones and their geometry in depth. The obtained results allow to control the geometry in depth of the fractures, the gaps between the different mapped traces along the fault zone as well as the thickness of landfill. All this information will be useful for the hidromechanical simulation of the massif, and to check the geometry and gas permeability calculated from emanometry.
The Madrid Basin and the Central System: A tectonostratigraphic analysis from 2D seismic lines
(Tectonophysics, 2013) Vicente Muñoz, Gerardo de; Muñoz Martín, Alfonso
Data from deep boreholes, seismic surveys, and surface geology are used to reconstruct the sedimentary infilling of the Cenozoic Madrid Basin. Eight main depositional sequences and seismic units are recognised. From the Paleogene, the latter four of these sedimentary sequences were deposited in a continental environment, under the influence of tectonic activity in the Central System, the Toledo Mountains, the Iberian Chain, and the Sierra de Altomira. The sedimentary infill shows an overall coarsening-upward trend from upper Cretaceous formations to syn-tectonic conglomerate deposits, followed by a fining-upward sequence and moderate reactivation of some faults during the late Miocene–Pliocene. The syn-tectonic sediments are Oligocene–early Miocene in age. The foredeep is oriented northeast–southwest and shows a sediment thickness of up to 3800 m in areas close to the Central System. Several types of tectonic structures are recognised, including imbricate thrust systems, thrust triangle zones, fault-propagation folds, back-thrust systems, and pop-up structures. The frontal thrusts were subjected to significant erosion, and late Miocene sediments onlap the anticlines of the onshore foreland. NW–SE-trending positive flower structures have been recognised in the eastern part of the basin. The total northwest–southeast shortening across the contact between the Madrid Basin and the Central System is approximately 5 km, of which 2–3 km occurred across the Southern Border Thrust. The simultaneous basement uplift of the Central System and the tectonic escape of the Sierra de Altomira have been interpreted as a consequence of constrictive deformation within the “Pyrenean” foreland of the Iberian microplate.
Inversion of moment tensor focal mechanisms for active stresses around the Microcontinent Iberia: Tectonic implications
(Tectonics, 2008) Vicente Muñoz, Gerardo de; Cloetingh, Sierd; Muñoz Martín, Alfonso; Olaiz Campos, Antonio José; Stich, Daniel; Vegas, Ramón; Galindo-Zaldívar, Jesus; Fernández Lozano, Javier
The Iberian microcontinent and its connected oceanic crust are affected by deformations related to the Eurasian-African plate boundary. Active stress inversions from populations of moment tensor focal mechanisms have been performed around and inside the Iberian peninsula, using a total of 213 moment tensor estimates. Main results are: 1) The tensorial solutions show better consistency and lower misfits compared to those obtained previously from first P arrival focal mechanisms. 2) Along the Eurasia- Africa western boundary, the type of active stresses progressively changes easternwards from triaxial extension to uniaxial compression along the Terceira Ridge, the Gloria Fault zone and the Gulf of Cadiz. 3) In the Betics-Alboran-Rif zone, uniaxial extension predominates with Shmax N155ºE trending. 4) In N Algeria, uniaxial compression reappears. 5) The Iberian foreland is currently under strike-slip to uniaxial extension tensorial conditions.
El cabalgamiento cenozoico de Boinás (Cordillera Cantábrica, España)
(Geogaceta, 2007) Vicente Muñoz, Gerardo de; González Nistal, S.; Muñoz Martín, Alfonso; Vegas, Ramón; Olaiz Campos, Antonio José; Fernández Lozano, Javier; Vicente, Raquel de
The opencast gold mine of Boinás, has allowed to outcrops the contact between the variscan basement and the Cenozoic sediments. It is observable that the contact is a post - Lower Oligocene thrust, with a N40ºE trend. From a macrostructural point of view, Boinás thrust spreads along more than 10 km with a constant orientation, a vertical gap that reaches 400 m, and a NW vergence. Northwestwards another Alpine thrust develops (Tineo, A l o n s o y Pulgar , 2004) with a parallel orientation an opposite vergence. Between both thrusts a tectonic pop-down appears (Narcea Pop-down). The dynamic analysis shows that this structure was activated by a paleostress tensor with an horizontal s1 trending N139ºE, with a stress regime close to uniaxial compression (R=0.06). This stress allows the geometrical interchanges between s2 and s3. The outcrop also allows to observe a secondary population of normal faults, that fits to an extensional stress tensor (R=0.01) with s3 trending N146ºE, that is coaxial with the main compressive stress tensor. We interpret both fault populations as generated by the tectonic thrust emplacement.
Mapa de esfuerzos de Europa a partir de Mecanismos focales calculados desde el Tensor de Momento Sísmico
(Geogaceta, 2006) Olaiz Campos, Antonio José; Vicente Muñoz, Gerardo de; Muñoz Martín, Alfonso; Vegas, Ramón
This work shows a new stress map for Europe obtained from the inversion of earthquakes focal mechanisms calculated with the centroid tensor method (Dzieownski et al., 1982). An amount of 1608 focal mechanisms have been selected with several quality criteria from different catalogues (CMT Harvard, ETH, Med-Net, I.G.N. and I.A.G.) from 1973 to present-day. Values for the maximum horizontal stress and the shape factor of the ellipsoid (horizontal/vertical stress) have been calculated following the Reches (1983) and De Vicente (1988) slip model. The local results have been interpolated to a 1ºx1º regular grid in which the relation between tectonic horizontal stress and vertical load has been taken into account. The final map shows a good correlation with the primary tectonic forces generated in the plate boundaries and the local perturbations related with main crustal heterogeneities as suggested by Gölke and Coblentz (1996).
Las cuencas del Pérmico y Triásico en la zona de enlace entre el Sistema central y la Cordillera Ibérica
(Reduca (Geología), 2015) Sánchez Moya, Yolanda; Muñoz Martín, Alfonso; Vicente Muñoz, Gerardo de; Sopeña, Alfonso
el itinerario propuesto discurre por un área de la provincia de Guadalajara, donde es posible analizar las relaciones entre la tectónica y la sedimentación durante el Pérmico y el Triásico. Los materiales de estas edades están muy bien expuestos y la relación con las fallas contemporáneas con la sedimentación es evidente. En el sector de enlace entre el Sistema Central y la Cordillera Ibérica se pueden examinar con detalle las características de las series del Pérmico que constituyen el inicio del ciclo de sedimentación postvarisco y las discordancias que separan el Paleozoico inferior del Pérmico y, de éste, con el Triásico inferior y medio. Una vista panorámica desde el castillo de Riba de Santiuste permite observar el gran espesor de las facies Buntsandstein que alcanza en este sector los 850 m y analizar las relaciones entre el control tectónico y la respuesta sedimentaria al movimiento de las fallas. A pocos kilómetros, cerca de la fractura principal que controla el borde occidental de Rift Ibérico, el espesor de los sedimentos correlativos es menor de 100 m y es posible examinar con detalle, las razones de esta drástica disminución.
Cenozoic thick-skinned deformation and topography evolution of the Spanish Central System
(Global and Planetary Change, 2007) Vicente Muñoz, Gerardo de; Vegas, Ramón; Muñoz Martín, Alfonso; Silva Barroso, Pablo Gabriel; Andriessen, Paul; Cloetingh, Sierd; González Casado, José Manuel; Van Wees, Jan Diederik; Álvarez García, Juan; Carbó Gorosabel, Andrés; Olaiz Campos, Antonio José
The Spanish Central System is a Cenozoic pop-up with an E-W to NE-SW orientation that affects all the crust (thick-skinned tectonics). It shows antiform geometry in the upper crust with thickening in the lower crust. Together with the Iberian Chain it constitutes the most prominent mountainous structure of the Pyrenean foreland. The evolutionary patterns concerning the paleotopography of the interior of the Peninsula can be established by an analysis of the following data: gravimetric, topographical, macro and micro tectonic, sedimentological (infilling of the sedimentary basins of the relative foreland), P-T-t path from apatite fission tracks, paleoseismic and instrumental seismicity. Deformation is clearly asymmetric in the Central System as evidenced by the existence of an unique, large (crustal-scale) thrust at its southern border, while in the northern one there is a normal sequence of north verging thrusts, towards the Duero Basin, whose activity ended during the Lower Miocene. This deformation was accomplished under triaxial compression, Oligocene- Lower Miocene in age, marked by NW-SE to NNW-SSE shortening. Locally orientations of paleostresses deviate from that of the regional tensor, following a period of relative tectonic quiescence. During the Upper Miocene-Pliocene, a reactivation of constrictive stress occurred and some structures underwent rejuvenation as a consequence of the action of tectonic stresses similar to those of today (uniaxial extension to strike-slip with NW-SE shortening direction). However, the westernmost areas show continuous activity throughout the whole of the Tertiary, with no apparent pulses. At the present time there is a moderate seismic activity in the Central System related to faults that were active during the Cenozoic, with the same kinematic characteristics.
European continuous active tectonic strain–stress map
(Tectonophysics, 2009) Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Vicente Muñoz, Gerardo de; Vegas, Ramón
This paper shows a new continuous strain–stress map for Europe obtained from the direct inversion of earthquake focal mechanisms calculated from the centroid tensor method. A total of 1608 focal mechanisms have been selected with several quality criteria from different catalogues (CMT Harvard, ETH, Med-Net, I.G.N. and I.A.G.) from 1973 to the present day. Values for the maximum horizontal shortening direction and brittle strain–stress regime defined by the k′ ratio (ey/ez, horizontal maximum/vertical strain) have been calculated following in Europe and Pannonian Basin the slip model of tri-axial deformation. The individual results including Dey and the shape of the active brittle strain ellipsoid have been interpolated to a final 15′ regular grid taking into account the relationship between the tectonic horizontal strain–stress value and the vertical load. Both continuous strain regime and maximum horizontal shortening (Dey) maps show a good correlation with the primary tectonic forces generated along the plate boundaries, plate kinematics and also some local perturbations related with main crustal heterogeneities and topography, as well as significant spatial variations in integrated crustal strength.
Seismicity and potencially active faults in the Northwest and Central-West Iberian Peninsula
(Journal of iberian geology, 2012) Martín-González, F.; Antón, L.; Insúa Arévalo, Juan Miguel; Vicente Muñoz, Gerardo de; Martínez Díaz, José J.; Muñoz Martín, Alfonso; Heredia, N.; Olaiz Campos, Antonio José
The Northwest and Central-West Iberian Peninsula configure an intraplate area far from the active plate boundaries, where the Variscan basement crops out extensively (Iberian Massif). This area of the Iberian Peninsula has been traditionally considered a seismically stable region; however, it presents a moderate intraplate seismicity which indicates the presence of active structures and the occurrence of potentially damaging earthquakes. The scarcity of Mesozoic and Cenozoic deposits makes very difficult to track the record of the more recent tectonic activity and the characterization of active tectonic structures within the Iberian Massif. Nevertheless the seismic sequences of 1995-1997 in Lugo (5.1 mb; IV) and 2003 in Zamora (4.2 Mw) provided important information about the orientation of the present stress tensor, and the distribution of the hypocenters informed about the rupture geometry of the fault planes. The present work integrates geological, geomorphological, structural, and seismological data in order to define the main potentially active faults in the region. Faults trending NE–SW to N–S are potentially active as strike-slip, in some cases with a reverse component, under a NW-SE to N–S compression. [RESUMEN] El Noroeste y Centro Oeste de la Peninsula Ibérica son parte de una región intraplaca alejada de los bordes de placa sísmicamente activos, donde aflora el basamento varisco (Macizo Ibérico). Esta región de la Península Ibérica ha sido tradicionalmente considerada sísmicamente estable; sin embargo, presenta una moderada sismicidad que indica la presencia de estructuras activas y terremotos potencialmente catastróficos. La escasez y dispersión de los depósitos Mesozoicos y Cenozoicos hace difícil identificar la actividad tectónica más reciente, así como la caracterización de las fallas potencialmente activas dentro del Macizo Iberico. Sin embargo la sismicidad de 1995 y 1997 en Lugo (5.1 mb) y de 2003 en Zamora (4.2 Mw) aportó importante información para determinar la orientación del tensor actual de esfuerzos. De igual modo, la orientación de las replicas aportó información sobre los planos de rotura. El presente trabajo integra datos geológicos, geomorfológicos, estructurales y sismotectónicos para definir las principales fallas potencialmente activas en la región. Las fallas con orientaciones NE-SW hasta N-S son potencialmente activas, bajo un tensor de esfuerzos de NW-SE a N-S, como fallas de desgarre y en algunas zonas con componente inversa.