Person:
Muñoz Martín, Alfonso

Loading...
Profile Picture
First Name
Alfonso
Last Name
Muñoz Martín
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Geológicas
Department
Geodinámica, Estratigrafía y Paleontología
Area
Geodinámica Interna
Identifiers
UCM identifierORCIDScopus Author IDWeb of Science ResearcherIDDialnet IDGoogle Scholar ID

Search Results

Now showing 1 - 10 of 110
  • Item
    Análisis de nuevos datos gravimétricos marinos en el entorno de la Isla Decepción (Islas Shetland del Sur, Antártida)
    (Revista de la Sociedad Geológica de España, 2001) Carbó Gorosabel, Andrés; Muñoz Martín, Alfonso; Martín Dávila, José; Catalán, Manuel; García, Alicia
    La Isla Decepción es la parte emergida de un volcán muy joven y activo. Se encuentra situada en el SO del Estrecho de Bransfield, que separa la Península Antártica de las islas Shetland del Sur. En este trabajo se muestran los resultados del levantamiento gravimétrico realizado en la campaña de investigación geofísica marina DECVOL99 (Diciembre de 1999). El procesado de los 4906 datos seleccionados, obtenidos a lo largo de 48 líneas de navegación, ha permitido la realización de dos mapas de anomalías de Bouguer en el interior y en el exterior de la Isla Decepción. El tratamiento de los datos gravimétricos ha incluido, además de las correcciones habituales, la corrección topográfica terrestre y del fondo marino utilizando una malla de 1 km de lado. Los mapas de anomalías de Bouguer resultantes muestran una serie de anomalías y gradientes gravimétricos bien definidos que, al integrarlos con el resto de información existente, permiten su interpretación desde el punto de vista estructural y tectónico. De este modo las anomalías gravimétricas en el entorno de la Isla Decepción se encuentran definidas por una serie de mínimos y máximos con dos orientaciones principales NE-SO y NO-SE, que se corresponden bien con rasgos morfoestructurales y geofísicos en otros sectores del Estrecho de Bransfield. La mayor parte de los gradientes gravimétricos alargados y con carácter neto pueden ser interpretados como zonas de fractura NO-SE y NE-SO que limitan áreas de máximos y mínimos gravimétricos. Las anomalías positivas de gran longitud de onda constituyen la continuación hacia el SO de la corteza continental de la Isla Livingston, mientras que los máximos gravimétricos de alta frecuencia están asociados a bloques elevados y de alta densidad. Las zonas de mínimos valores de anomalía de Bouguer coinciden con los principales ejes de extensión y máximo relleno de materiales sedimentarios recientes. Las orientaciones y localizaciones de las bandas de alto gradiente gravimétrico permiten su correlación con zonas de fracturas definidas mediante otros datos geofísicos marinos, así como con la batimetría y los datos estructurales medidos en superficie.
  • Item
    Análisis integrado de la topografía y anomalías graviméticas en modelación análoga: un modelo de evolución del relieve en la Península Ibérica
    (Revista de la Sociedad Geológica de España, 2011) Fernández-Lozano, Javier; Sokoutis, Dimitrios; Willingshofer, Erns; Muñoz Martín, Alfonso; Vicente Muñoz, Gerardo de; Cloetingh1, Sierd
    El análisis integrado de la topografía y las anomalías gravimétricas en la Península Ibérica invoca a la presencia de grandes pliegues que afectan a toda la litosfera como precursores de los relieves E-O a NE-SO que se distribuyen por el Macizo Varisco, así como a un mecanismo de engrosamiento cortical nucleado a partir de fallas Tardi-Variscas, como origen del relieve del este peninsular (Cadena Ibérica-Costero Catalana), con patrones dominantes E-O, NE-SO y NO-SE. El modo de deformación, así como el estilo, dependen tanto de las propiedades reológicas iniciales de una litosfera a otra (litosfera resistente Varisca hacia el oeste peninsular/litosfera débil y caliente resultado de la extensión Mesozoica hacia el este) como a los accidentes tectónicos pre-existentes. Presentamos una nueva metodología aplicada a la modelación análoga, basada en el estudio del espectro de las anomalías gravimétricas y la topografía que nos han permitido inferir los procesos responsables de la asimetría en el patrón del relieve intra-placa de la Península Ibérica. A su vez, nuestros resultados arrojan luz sobre los mecanismos generadores del relieve en zonas de intra-placa donde la escasez o falta de resolución de los perfiles sísmicos y geomagnéticos impide la interpretación de la parte más profunda de la litosfera como Asia Central o los Atlas del norte de África.
  • Item
    Morphostructure at the junction between the Beata ridge and the Greater Antilles island arc (offshore Hispaniola southern slope)
    (Tectonophysics, 2014) Granja Bruña, José Luis; Carbó Gorosabel, Andrés; Llanes Estrada, Pilar; Muñoz Martín, Alfonso
    Oblique convergence between the Caribbean plate's interior and the inactive Greater Antilles island arc has resultedin the collision and impingement of the thickened crust of theBeata ridge into southern Hispaniola Island. Deformation resulting from this convergence changes from a low-angle southward-verging thrust south of easternHispaniola, to collision and uplift in south-central Hispaniola, and to left-lateral transpression along theSouthern peninsula of Haiti in western Hispaniola. Using new swath bathymetry and a dense seismic reflectiongrid, we mapped the morphological, structural and sedimentological Elements of offshore southern Hispaniola.We have identified four morphotectonic provinces: the Dominican sub-basin, the Muertos margin, the Beataridge and the Haiti sub-basin. The lower slope of the Muertos margin is occupied by the active Muertos thrustbelt, which includes several active out-of-sequence thrust faults that, were they to rupture along their entirelength, could generate large-magnitude earthquakes. The interaction of the thrust beltwith the Beata ridge yieldsa huge recess and the imbricate system disappears. The upper slope of the Muertos margin shows hick slopedepositswhere the extensional tectonics and slumping processes predominate. The northern Beata ridge consistsof an asymmetrically uplifted and faulted block of oceanic crust. Our results suggest that the shallower structureand morphology of the northern Beata ridge can be mainly explained by a mechanism of extensional unloadingfrom the Upper Cretaceous onward that is still active residually along the summit of the ridge. The tectonicmodels for the northern Beata ridge involving active reverse strike–slip faults and transpression caused by theoblique convergence between the Beata ridge and the island arc are not supported by the structural interpretation.The eastern Bahoruco slope an old normal fault that acts as a passive tear fault accommodating the sharpalong-strike transition from low-angle thrusting to collision and uplifting.
  • Item
    Sobre el origen de la asimetría en el patrón general del relieve en el interior de la Península Ibérica: nuevos resultados obtenidos mediante modelación análoga
    (Geogaceta, 2010) Fernández Lozano, Javier; Sokoutis, Dimitrios; Willingshofer, Ernst; Muñoz Martín, Alfonso; De Vicente Muñoz, Gerardo; Cloetingh, Sierd
    Analogue modelling contributes to the interpretation of lithosphere scale folds in Iberia as a result of largescale convergence during Oligocene-Miocene times between the Iberian and European Plates. Different tectonothermal events affected the microplate since late Paleozoic and resulted in lateral strength variations of the Iberian lithosphere. An old and cold lithosphere, Variscan in age, can be found in the westernmost part of Iberia whereas a relative weak and hot Mesozoic lithosphere affected by episodes of rifting and basin inversion during Mesozoic- Tertiary times covers the area of the Iberian Chain. Our study aims at deciphering whether deformation and topography evolution in Iberia are related to lateral strength variations and/or the inherited structural grain stemming from Variscan deformation. We also have studied the strength of the lithosphere to gain insights into the effects of rheological variations related to local thrusting or primary strength variations along the Iberian lithosphere.
  • Item
    Estructura alpina del antepaís ibérico
    (Geología de España, 2004) Vicente Muñoz, Gerardo de; Muñoz Martín, Alfonso; Guimerà Rosso, Joan; Vegas, Ramón; Cloetingh, Sierd; Vicente Muñoz, Gerardo de
  • Item
    Controles tectónicos y estructurales de la incisión fluvial en el centro-oeste de la Cuenca del Duero, NO de Iberia
    (Geogaceta, 2007) Antón López, Loreto; Muñoz Martín, Alfonso
    The present work approaches incision rates quantification of Duero River in the central- west par t of Iberia and implications of tectonics in the evolution and change of drainage patterns. For this aim we calculate incision rates from the two main geomorphological surfaces defined in the area. Comparing fluvial incision rates and fracture pattern a strong structural control is shown; either in the orientation of drainage network, either in the incision rates distribution. Drainage pattern shows two main orientations, NW-SE following the hercinian structure of the area and NE-SW to N-S matching with the main fracture sets (Duero, Almendra, Almeida-Valderaduey faults, as example). Fluvial incision is mostly controlled by the great faults and faults systems NE-SW to N-S oriented.
  • Item
    Caracterización geofísica y mineralógica de las formaciones superficiales de la Cuenca del río Loa (desierto de Atacama, Chile)
    (Geotemas, 2016) Sanjuan, Nieves; López Andrés, Sol; Muñoz Martín, Alfonso
    Durante 2015 tuvo lugar una exploración geotécnica y geofísica en el desierto de Atacama (Chile) para el diseño de una planta solar fotovoltaica. Los datos de resistividad obtenidos en la Fm. El Batea resultaron extremadamente elevados (107Ω•m), por lo que se llevó a cabo un muestreo de las unidades geológicas presentes para su estudio mineralógico mediante difracción de rayos X (DRX). La composición mineral de la Fm. El Batea muestra una casi total ausencia de humedad y una muy baja porosidad. Estos factores producen que la componente electrolítica en esta formación sea casi despreciable, y su comportamiento eléctrico coincide con la conductividad de sus fases minerales casi en estado puro. Estas características se deben a las extremas condiciones ambientales en el desierto de Atacama. La formación El Batea ha supuesto una barrera a la evapotranspiración, siendo los valores de resistividad de la formación infrayacente prácticamente normales (103-104Ω•m).
  • Item
    Survey explores active tectonics in Northeastern Caribbean
    (Eos, Transactions American Geophysical Union, 2005) Carbó Gorosabel, Andrés; Córdoba Barba, Diego; Martín Dávila, José; Ten Brink, Uri S.; Herranz Araújo, Pedro; Von Hilldebrant, Christa; Payero, Juan; Muñoz Martín, Alfonso; Pazos, Antonio; Catalán, Manuel; Granja Bruña, José Luis; Gómez Ballesteros, María
    There is renewed interest in studying the active and complex northeastern Caribbean plate boundary to better understand subduction zone processes and for earthquake and tsunami hazard assessments [e.g., ten Brink and Lin, 2004; ten Brink et al., 2004; Grindlay et al, 2005]. To study the active tectonics of this plate boundary, the GEOPRICO-DO (Geological, Puerto Rico-Dominican) marine geophysical cruise, carried out between 28 March and 17 April 2005 (Figure 1), studied the active tectonics of this plate boundary. Initial findings from the cruise have revealed a large underwater landslide, and active faults on the seafloor (Figures 2a and 2c). These findings indicate that the islands within this region face a high risk from tsunami hazards, and that local governments should be alerted in order to develop and coordinate possible mitigation strategies. The cruise collected multibeam bathymetry, gravity, magnetic, high-resolution seismic, deep seismic sounding, and multichannel seismic reflection data, which are currently being processed and interpreted (Table 1). In early November 2005, 10 ocean-bottom seismometers (OBS) that had been deployed northeast of Puerto Rico and the Virgin Islands (Figure 1) during the cruise were recovered. These OBS recorded data during the cruise and the local seismicity between April and October 2005.
  • Item
    Alboran basin, Southern Spain. Part II: Neogene tectonic implications for the orogenic float model
    (Marine and Petroleum Geology, 2008) Gómez Ballesteros, María; Rivera, Jesus; Muñoz, Araceli; Muñoz Martín, Alfonso; Acosta, Juan; Carbó Gorosabel, Andrés; Uchupi, E.
    We infer that the Alboran Basin, the first western Mediterranean Basin found after crossing Gibraltar, is an orogenic float underlained by a de´ collement system, a multi-layered ductile shear extending from 10km to between 30 and 40km below sea level. This float was formed as consequence of the collision of the African–Eurasian plates in the Oligocene–late Miocene. Synchronous with this compression the float experienced basin wide crustal thinning and subsidence about 25 m/year ago by subcrustal processes. Since latest Miocene the float has undergone compression due to the continuous convergence of Eurasia and Africa. The faults created as a result of this compression are dominated by a conjugate system of northeast trending left-lateral and northwest right-lateral strike–slip faults. This deformation is taking place under a simple shear mechanism. Associated with the northwest and northeast lateral faults are zones of compression trending west and east of north extending from the base of the basin’s north upper slope to the Alboran Ridge. The initial morphology of the Alboran Ridge on the southern side of the Alboran Basin was due to the construction of a volcanic edifice at the northeast end of the ridge and igneous activity along northeast trending fractures southwest of the edifice. At the northeast end of the Alboran Ridge motion along a right-lateral fault cutting across the ridge led to sediment collapse and the creation of a prominent embayment on the ridge’s northwest flank. Deformation is more subdued in the western than in the eastern part of the Alboran Basin, a tectonic style due either to differences in sediment rheology or that the accommodation of the convergence of Africa and Iberia is more diffused and attenuated in the west than in the east.
  • Item
    Aplicación del método de resistividades con SEV para la caracterización hidrogeológica de la cuenca de Dajla (Argelia)
    (Geogaceta, 2010) Torres López, Sara; Muñoz Martín, Alfonso; Jiménez Díaz, Alberto; Ahmed, Baba; De lorenzo, Javier; García López, Cristina; Olaiz Campos, Antonio José
    The aim of this study is the hydrogeological exploration and characterization using Geophisical surveying in the vicinity of Dakhla Basin (Algeria). To that end, it has been used the method of resistivities through Vertical Electric Sounding (VES) on a campaign carried out in April 2009. The work included 19 VES, which have been calibrated with existing wells and with field geological observations. The results have allowed the characterization of Tertiary deposits as well as Ordovician sandstones. With these data, it has been possible to identify the position and thickness of a shallow salty aquifer, and the roof of a deep freshwater aquifer developed on the Ordovician sandstones. The integration of the geometry of the aquifers with the resistivity values obtained in the Ordovician sandstones has allowed the location of a favorable area for the situation of a new well.