Person: Castro Ruiz, Laura
Loading...
First Name
Laura
Last Name
Castro Ruiz
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Químicas
Department
Ingeniería Química y de Materiales
Area
Identifiers
7 results
Search Results
Now showing 1 - 7 of 7
Item Batch and Continuous Chromate and Zinc Sorption from Electroplating Effluents Using Biogenic Iron Precipitates(Minerals, 2021) Rocha, Fabiana; Muñoz Sánchez, Jesús Ángel; González González, Felisa; Blázquez Izquierdo, María Luisa; Castro Ruiz, LauraNanoparticles of iron precipitates produced by a microbial consortium are a suitable adsorbent for metal removal from electroplating industry wastewaters. Biogenic iron precipitates were utilized as adsorbents for chromate and zinc in batch conditions. Furthermore, the iron precipitates were embedded in alginate beads for metal removal in fixed-bed columns, and their performance was evaluated in a continuous system by varying different operational parameters such as flow rate, bed height, and feeding system (down- and up-flows). The influence of different adsorption variables in the saturation time, the amount of adsorbed potentially toxic metals, and the column performance was investigated, and the shape of the breakthrough curves was analyzed. The optimal column performance was achieved by increasing bed height and by decreasing feed flow rate and inlet metal concentration. The up-flow system significantly improved the metal uptake, avoiding the preferential flow channels.Item Arsenate and Arsenite Sorption Using Biogenic Iron Compounds: Treatment of Real Polluted Waters in Batch and Continuous Systems(Metals, 2021) Ayala, Lesly Antonieta; Vardanyan, Arevik; Zhang, Ruiyong; Muñoz Sánchez, Jesús Ángel; Castro Ruiz, LauraArsenic pollution in waters is due to natural and anthropogenic sources. Human exposure to arsenic is associated with acute health problems in areas with high concentrations of this element. Nanometric iron compounds with large specific surface areas and higher binding energy produced by some anaerobic microorganisms are thus expected to be more efficient adsorbents for the removal of harmful metals and metalloids than chemically produced iron oxides. In this study, a natural consortium from an abandoned mine site containing mainly Clostridium species was used to biosynthesize solid Fe(II) compounds, siderite (FeCO3) and iron oxides. Biogenic precipitates were used as adsorbents in contact with solutions containing arsenate and arsenite. The adsorption of As(V) fitted to the Langmuir model (qmax = 0.64 mmol/g, KL = 0.019 mmol/L) at the optimal pH value (pH 2), while the As(III) adsorption mechanism was better represented by the Freundlich model (KF = 0.476 L/g, n = 2.13) at pH 10. Water samples from the Caracarani River (Chile) with high contents of arsenic and zinc were treated with a biogenic precipitate encapsulated in alginate beads in continuous systems. The optimal operation conditions were low feed flow rate and the up-flow system, which significantly improved the contaminant uptake. This study demonstrates the feasibility of the application of biogenic iron compounds in the treatment of polluted waters.Item Continuous metal biosorption applied to industrial effluents: a comparative study using an agricultural by-product and a marine alga(Environmental Earth Sciences, 2017) Castro Ruiz, Laura; Bonilla, Luis; González González, Felisa; Ballester Pérez, Antonio; Blázquez Izquierdo, María Luisa; Muñoz Sánchez, Jesús ÁngelFixed-bed column experiments have been conducted to evaluate the removal of metals from real industrial wastewaters. The effluents tested were provided by two different metallurgical companies: Industrial Goñabe, a galvanizing plant, and Sao Domingos mine, an abandoned sulfide mine. Sugar-beet pulp, a by-product of the sugar industry, and brown alga Fucus vesiculosus were used as biosorbents. The influence of pH on the sorption process was insignificant for the tests using Industrial Goñabe wastewater. On the contrary, an increase of pH improved metal sorption uptake and yield and saturation rate in the case of the Sao Domingos wastewater. A lower metal concentration in Sao Domingos wastewater resulted in a higher availability of metal-binding sites on the biomass. Better sorption parameters for both real wastewaters were obtained using brown alga Fucus vesiculosus. At pH 5, Zn sorption in continuous mode increased from 36 to 48% for Industrial Goñabe wastewater and from 34 to 37% for Sao Domingos wastewater. In the latter case, copper sorption increased from 73 to 88%. Breakthrough points that determine the service time of columns were reached later using alga as biosorbent. For Zn, column adsorption performance improved substantially with alga and its service time by 5 times. In the case of Cu, the breakthrough point of the second column was not reached during 1750 min of experimentation. The results obtained reaffirm the industrial applicability of these techniques.Item Design of remediation pilot plants for the treatment of industrial metal-bearing effluents (BIOMETAL DEMO project): Lab tests(Hydrometallurgy, 2017) Ballester Pérez, Antonio; Castro Ruiz, Laura; Clara Costa, Maria; Carlier, Jorge; García-Roig, Manuel; Pérez-Galende, Patricia; Alvarez, Angela; Bertagnolli, Caroline; Guibal, EricCurrent research is the first part of the BIOMETAL DEMO project, funded by the European Union, focusing on the development of complementary and modular biotreatment processes for the removal of metal ions from industrial effluents (issued from mining industry, surface treatment and ceramics). Metal bio-precipitation (in form of metal sulfides and metal phosphates) using sulfate-reducing bacteria (SRB), phytase and phosphatase enzymes, biosorption using sugar-beet pulp, algal biomass and alginate- or chitosan-based composites (immobilizing polyethyleneimine derivatives by encapsulation) have been extensively studied using synthetic and industrial effluents. These preliminary results allow designing a treatment flow-sheet including pre-treatment of the effluent using biologically-assisted precipitation followed by biosorption (for mining effluents that contain sulfate anions). For surface treatment and ceramics effluents, bio-precipitation combined with biosorption processes and physicochemical pretreatment followed by biosorption process represent, respectively, a promising solution. The carbon-source for the SRB process, the optimization of process parameters and the biosorbents have been selected taking into account both the technical performance and the economic viability.Item Biosynthesis of gold nanowires using sugar beet pulp(Process Biochemistry, 2011) Castro Ruiz, Laura; Blázquez Izquierdo, María Luisa; Muñoz Sánchez, Jesús Ángel; González González, Felisa; García Balboa, María Del Camino; Ballester Pérez, AntonioSugar beet pulp was used as reductor and capping agent for the synthesis of gold nanowires. Reduction of tetrachloroaurate with sugar beet pulp is a simple, room temperature and environmentally friendly method. Polysaccharides and proteins are involved in the bioreduction and synthesis of nanoparticles. Different pH and molar concentration ratios of HAuCl4 were studied for the synthesis of gold nanowires. The formation of nanowires was induced by both basic mediums, due to the competence between biomolecules and hydroxide ions, and high concentrations of gold ions, because of the lack of capping agent to stabilize the preliminary nanoparticles formed that stick together producing wire-like nanostructures instead of nanospheres. This method allowed the synthesis of crystalline gold nanowires in the absence of a surfactant or polymer to direct nanoparticle growth, and without externally added seed crystallites. The synthesis of other metallic nanostructures such as silver and platinum could be achieved following a similar procedure.Item Extracellular biosynthesis of gold nanoparticles using sugar beet pulp(Chemical Engineering Journal, 2010) Castro Ruiz, Laura; Blázquez Izquierdo, María Luisa; González González, Felisa; Muñoz Sánchez, Jesús Ángel; Ballester Pérez, AntonioSugar beet pulp was used as redactor agent for the synthesis of gold nanoparticles. The method developed is environmentally friendly and allows control of nanoparticles shapes by changing the initial pH value of aqueous HAuCl4 solutions. At low initial pH values, polygonal nanoparticles were obtained, mainly triangular and hexagonal shapes. Increasing the pH value, nanorods together with polygonal nanoparticles were produced. At higher initial pH, gold nanowires were formed. Gold biosorption took place at long reaction time, especially at low pH. This procedure could be useful to remove or recover metals from aqueous wastes. The synthesis of other metallic nanostructures such as silver and platinum could be achieved following a similar procedure.Item Speeding up bioproduction of selenium nanoparticles by using Vibrio natriegens as microbial factory(Scientific Reports, 2017) Fernández-Llamosas, Helga; Castro Ruiz, Laura; Blázquez Izquierdo, María Luisa; Díaz, Eduardo; Carmona, ManuelSelenium and selenium nanoparticles (SeNPs) are extensively used in biomedicine, electronics and some other industrial applications. The bioproduction of SeNPs is gaining interest as a green method to manufacture these biotechnologically relevant products. Several microorganisms have been used for the production of SeNPs either under aerobic or anaerobic conditions. Vibrio natriegens is a non-pathogenic fast-growing bacterium, easily cultured in different carbon sources and that has recently been engineered for easy genetic manipulation in the laboratory. Here we report that V. natriegens was able to perfectly grow aerobically in the presence of selenite concentrations up to 15 mM with a significant survival still observed at concentrations as high as 100 mM selenite. Electron microscopy and X-ray spectroscopy analyses demonstrate that V. natriegens cells growing aerobically in selenite-containing LB medium at 30 °C produced spherical electron-dense SeNPs whose size ranged from 100–400 nm. Selenite reduction just started at the beginning of the exponential growth phase and the release of SeNPs was observed after cell lysis. Remarkably, V. natriegens produced SeNPs faster than other described microorganisms that were proposed as model bioreactors for SeNPs production. Thus, the fast-growing V. natriegens bacterium becomes a suitable biocatalyst for bioremediation of selenite and for speeding-up the eco-friendly synthesis of SeNPs.