Person: Benito Peña, María Elena
Loading...
First Name
María Elena
Last Name
Benito Peña
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Químicas
Department
Química Analítica
Area
Química Analítica
Identifiers
12 results
Search Results
Now showing 1 - 10 of 12
Item Molecular super-gluing: a straightforward tool for antibody labelling and its application to mycotoxin biosensing(Analytical and Bioanalytical Chemistry, 2022) Prádanas González, Fernando; Glahn Martínez, Ana Bettina; Benito Peña, María Elena; Arola, Henri O.; Nevanen, Tarja K.; Moreno Bondi, María CruzMycotoxins are low molecular weight toxic compounds, which can cause severe health problems in animals and humans. Immunoassays allow rapid, simple and cost-efective screening of mycotoxins. Sandwich assays with a direct readout provide great improvement in terms of selectivity and sensitivity, compared to the widely used competitive assay formats, for the analysis of low molecular weight molecules. In this work, we report a non-competitive fuorescence anti-immune complex (IC) immunoassay, based on the specifc recognition of HT-2 toxin with a pair of recombinant antibody fragments, namely antigen-binding fragment (Fab) (anti-HT-2 (10) Fab) and single-chain variable fragment (scFv) (anti-IC HT-2 (10) scFv). The SpyTag and SpyCatcher glue proteins were applied for the frst time as a bioconjugation tool for the analysis of mycotoxins. To this aim, a SpyTag-mScarlet-I (fuorescent protein) and scFv-SpyCatcher fusion proteins were constructed, produced and fused in situ during the assay by spontaneous Tag-Catcher binding. The assay showed an excellent sensitivity with an EC50 of 4.8±0.4 ng mL−1 and a dynamic range from 1.7±0.3 to 13±2 ng mL−1, an inter-day reproducibility of 8.5% and a high selectivity towards HT-2 toxin without cross-reactivity with other Fusarium toxins. The bioassay was applied to the analysis of the toxin in an oat reference material and in oat samples, with a LOD of 0.6 µg kg−1, and the results were validated by analysing a certifcate reference material and by HPLC–MS/MS.Item Comparative Study of the Performance of Two Different Luciferases for the Analysis of Fumonisin B1 in Wheat Samples(Analysis & Sensing, 2022) Luque Uría, Álvaro; Peltomaa, Riikka; Navarro Duro, Marina; Fikacek, Sabrina; Head, Trajen; Deo, Sapna K.; Daunert, Sylvia; Benito Peña, María Elena; Moreno Bondi, María CruzThe development of two different immunoassays for the determination of fumonisin B1 in wheat samples is reported. A previously described mimopeptide for fumonisin B1 (FB1) was used to produce fusion proteins in combination with two different luciferases: Gaussia luciferase (GLuc) and NanoLuc luciferase (NLuc). The production, expression and the development of two immunoassays based on these fusion proteins (A2- GLuc and A2-NLuc) is detailed. The assay showing the best performance, A2-NLuc, with a limit of detection of 0.61 ngmL 1 and a dynamic range from 1.9 to 95 ngmL 1 , was employed for the analysis of spiked wheat samples, a reference matrix material, as well as naturally contaminated wheat samples. The recoveries obtained in the spiked samples were acceptable, between 81.5 and 109%, with relative standard deviations lower than 14%. The analysis of naturally contaminated wheat was validated by a liquid chromatography coupled to tandem mass detection method.Item Homogeneous quenching immunoassay for fumonisin B1 based on gold nanoparticles and an epitope-mimicking yellow fluorescent protein(ACS Nano, 2018) Peltomaa, Riikka Johanna; Amaro Torres, Francisco; Carrasco, Sergio; Orellana Moraleda, Guillermo; Benito Peña, María Elena; Moreno Bondi, María CruzHomogeneous immunoassays represent an attractive alternative to traditional heterogeneous assays due to their simplicity, sensitivity, and speed. On the basis of a previously identified epitope-mimicking peptide, or mimotope, we developed a homogeneous fluorescence quenching immunoassay based on gold nanoparticles (AuNPs) and a recombinant epitope-mimicking fusion protein for the detection of mycotoxin fumonisin B1 (FB1). The fumonisin mimotope was cloned as a fusion protein with a yellow fluorescent protein that could be used directly as the tracer for FB1 detection without the need of labeling or a secondary antibody. Furthermore, owing to the fluorescence quenching ability of AuNPs, a homogeneous immunoassay could be performed in a single step without washing steps to separate the unbound tracer. The homogeneous quenching assay showed negligible matrix effects in 5% wheat extract and high sensitivity for FB1 detection, with a dynamic range from 7.3 to 22.6 ng/mL, a detection limit of 1.1 ng/mL, and IC50 value of 12.9 ng/mL, which was significantly lower than the IC50 value of the previously reported assay using the synthetic counterpart of the same mimotope in a microarray format. The homogeneous assay was demonstrated to be specific for fumonisins B1 and B2, as no significant cross-reactivity with other mycotoxins was observed, and acceptable recoveries (86% for FB1 2000 μg/kg and 103% for FB1 4000 μg/kg), with relative standard deviation less than 6.5%, were reported from spiked wheat samples, proving that the method could provide a valuable tool for simple analysis of mycotoxin-contaminated food samples.Item Extracting mycotoxins from edible vegetable oils by using green, ecofriendly deep eutectic solvents(Food Chemistry, 2023) Pradanas-González, Fernando; Aragoneses-Cazorla, Rubén; Ángel Merino-Sierra, Miguel; Andrade-Bartolomé, Elena; Navarro-Villoslada, Fernando; Benito-Peña, Elena; Moreno-Bondi, María Cruz; Moreno Bondi, María Cruz; Benito Peña, María Elena; Navarro Villoslada, Fernando; Prádanas González, FernandoIn this work, we developed an environmentally friendly liquid–liquid microextraction method using a natural deep eutectic solvent in combination with liquid chromatography for the simultaneous determination of four mycotoxins (deoxynivalenol, alternariol, ochratoxin A and zearalenone) in edible vegetable oils. A chemometric approach assessed the effect of the operational parameters on the mycotoxin extraction efficiency. The extracts were analyzed by HPLC coupled with a diode array and fluorescence detector. The optimum NADES composition resulted in the highest extraction recoveries, and it was applied to coextract the target mycotoxins in several types of edible vegetable oils without using hazardous solvents or requiring further clean-up. The limits of detection ranged from 0.07 to 300μg/kg, and recoveries were close to 100%, except for zearalenone(viz. 35%), with relative standard deviations below 9% in all cases. The proposed method was validated following the European Commission 2002/657/EC and 2006/401/EC.Item Magnetic Janus micromotors for fluorescence biosensing of tacrolimus in oral fluids(Biosensors and Bioelectronics, 2024) Glahn Martínez, Ana Bettina; Jurado-Sánchez, Beatriz; Benito Peña, María Elena; Escarpa, Alberto; Moreno Bondi, María CruzTacrolimus (FK506) is a macrolide lactone immunosuppressive drug that is commonly used in transplanted patients to avoid organ rejection. FK506 exhibits high inter- and intra-patient pharmacokinetic variability, making monitoring necessary for organ graft survival. This work describes the development of a novel bioassay for monitoring FK506. The bioassay is based on using polycaprolactone-based (PCL) magnetic Janus micromotors and a recombinant chimera receptor that incorporates the immunophilin tacrolimus binding protein 1A (FKBP1A) tagged with Emerald Green Fluorescent Protein (EmGFP). The approach relies on a fluorescence competitive bioassay between the drug and the micromotors decorated with a carboxylated FK506 toward the specific site of the fluorescent immunophilin. The proposed homogeneous assay could be performed in a single step without washing steps to separate the unbound receptor. The proposed approach fits the therapeutic requirements, showing a limit of detection of 0.8 ng/mL and a wide dynamic range of up to 90 ng/mL. Assay selectivity was evaluated by measuring the competitive inhibition curves with other immunosuppressive drugs usually co-administered with FK506. The magnetic propulsion mechanism allows for efficient operation in raw samples without damaging the biological binding receptor (FKBP1A-EmGFP). The enhanced target recognition and micromixing strategies hold considerable potential for FK506 monitoring in practical clinical use.Item Highly fluorescent magnetic nanobeads with a remarkable stokes shift as labels for enhanced detection in immunoassays(Small, 2018) Salis, Francesca; Descalzo López, Ana Belén; Benito Peña, María Elena; Moreno Bondi, María Cruz; Orellana Moraleda, GuillermoFluorescence immunoassays are popular for achieving high sensitivity, but they display limitations in biological samples due to strong absorption of light, background fluorescence from matrix components, or light scattering by the biomacromolecules. A powerful strategy to overcome these problems is introduced here by using fluorescent magnetic nanobeads doped with two boron-dipyrromethane dyes displaying intense emission in the visible and near-infrared regions, respectively. Careful matching of the emission and absorption features of the dopants leads to a virtual Stokes shift larger than 150 nm achieved by an intraparticle Förster resonance energy transfer (FRET) process between the donor and the acceptor dyes. Additionally, the magnetic properties of the fluorescent beads allow preconcentration of the sample. To illustrate the usefulness of this approach to increase the sensitivity of fluorescence immunoassays, the novel nanoparticles are employed as labels for quantification of the widely used Tacrolimus (FK506) immunosuppressive drug. The FRET-based competitive inhibition immunoassay yields a limit of detection (LOD) of 0.08 ng/mL, with a dynamic range (DR) of 0.15–2.0 ng/mL, compared to a LOD of 2.7 ng/mL and a DR between 4.1 and 130 ng/mL for the immunoassay carried out with direct excitation of the acceptor dye.Item Homogeneous immunoassay for cyclopiazonic acid based upon mimotopes and upconversion-resonance energy transfer(Biosensors and Bioelectronics, 2023) Prádanas González, Fernando; Peltomaa, Riikka Johanna; Satu Lahtinen; Luque Uria, Álvaro; Vicente Más; Rodrigo Barderas; Chris M. Maragos; Canales Mayordomo, María Ángeles; Tero Soukka; Benito Peña, María Elena; Moreno Bondi, María CruzStrains of Penicillium spp. are used for fungi-ripened cheeses and Aspergillus spp. routinely contaminate maize and other crops. Some of these strains can produce toxic secondary metabolites (mycotoxins), including the neurotoxin α-cyclopiazonic acid (CPA). In this work, we developed a homogeneous upconversion-resonance energy transfer (UC-RET) immunoassay for the detection of CPA using a novel epitope mimicking peptide, or mimotope, selected by phage display. CPA-specific antibody was used to isolate mimotopes from a cyclic 7-mer peptide library in consecutive selection rounds. Enrichment of antibody binding phages was achieved, and the analysis of individual phage clones revealed four different mimotope peptide sequences. The mimotope sequence, ACNWWDLTLC, performed best in phage-based immunoassays, surface plasmon resonance binding analyses, and UC-RET-based immunoassays. To develop a homogeneous assay, upconversion nanoparticles (UCNP, type NaYF4:Yb3+, Er3+) were used as energy donors and coated with streptavidin to anchor the synthetic biotinylated mimotope. Alexa Fluor 555, used as an energy acceptor, was conjugated to the anti-CPA antibody fragment. The homogeneous single-step immunoassay could detect CPA in just 5 min and enabled a limit of detection (LOD) of 30 pg/mL (1.5 μg/kg) and an IC50 value of 0.36 ng/mL. No significant cross-reactivity was observed with other co-produced mycotoxins. Finally, we applied the novel method for the detection of CPA in spiked maize samples using high-performance liquid chromatography coupled to a diode array detector (HPLC-DAD) as a reference method.Item Tag-specific affinity purification of recombinant proteins by using molecularly imprinted polymers(Analytical Chemistry, 2019) Gómez-Arribas, Lidia N.; Urraca Ruiz, Javier; Benito Peña, María Elena; Moreno Bondi, María CruzEpitope tagging is widely used to fuse a known epitope to proteins for which no affinity receptor is available by using recombinant DNA technology. One example is FLAG epitope (DYKDDDDK), which provides better purity and recoveries than the favorite polyhistidine tag. However, purification requires using anti-FLAG antibody resins, the high cost and non-reusability of which restrict widespread use. One cost-effective solution is provided by the use of bioinspired anti-FLAG molecularly imprinted polymers (MIPs). This work describes the development of MIPs, based on the epitope approach, synthesized from the tetrapeptide DYKD as template that affords purification of FLAG-derived recombinant proteins. Polymer was optimized by using a combinatorial approach to select the functional monomer(s) and cross-linker(s), resulting in the best specific affinity toward FLAG and the peptide DYKD. The imprinted resin obtained was used to purify mCherry proteins tagged with either FLAG or DYKD epitopes from crude cell lysates. Both mCherry variants were highly efficiently purified (R ≥ 95%, RSD ≤ 15%, n = 3) and impurities were removed. Unlike existing antibody-based resins, the proposed tag-imprinting strategy provides a general method for meeting the growing demand for efficient, inexpensive, and versatile materials for tagged proteins purification.Item Recombinant antibodies and their use for food immunoanalysis(Analytical & Bioanalytical Chemistry, 2021) Peltomaa, Riikka Johanna; Barderas, Rodrigo; Benito Peña, María Elena; Moreno Bondi, María CruzAntibodies are widely employed as biorecognition elements for the detection of a plethora of compounds including food and environmental contaminants, biomarkers, or illicit drugs. They are also applied in therapeutics for the treatment of several disorders. Recent recommendations from the EU on animal protection and the replacement of animal-derived antibodies by non-animal-derived ones have raised a great controversy in the scientific community. The application of recombinant antibodies is expected to achieve a high growth rate in the years to come thanks to their versatility and beneficial characteristics in comparison to monoclonal and polyclonal antibodies, such as stability in harsh conditions, small size, relatively low production costs, and batch-to-batch reproducibility. This review describes the characteristics, advantages, and disadvantages of recombinant antibodies including antigen-binding fragments (Fab), single-chain fragment variable (scFv), and single-domain antibodies (VHH) and their application in food analysis with especial emphasis on the analysis of biotoxins, antibiotics, pesticides, and foodborne pathogens. Although the wide application of recombinant antibodies has been hampered by a number of challenges, this review demonstrates their potential for the sensitive, selective, and rapid detection of food contaminants.Item Bioluminescent detection of zearalenone using recombinant peptidomimetic Gaussia luciferase fusion protein(2020) Peltomaa, Riikka Johanna; Fikacek, Sabrina; Benito Peña, María Elena; Barderas, Rodrigo; Head, Trajen; Deo, Sapna; Daunert, Sylvia; Moreno Bondi, María CruzThe development of a bioluminescent immunosensor is reported for the determination of zearalenone (ZEA) based on a peptide mimetic identified by phage display. The peptide mimetic GW, with a peptide sequence GWWGPYGEIELL, was used to create recombinant fusion proteins with the bioluminescent Gaussia luciferase (GLuc) that were directly used as tracers for toxin detection in a competitive immunoassay without the need for secondary antibodies or further labeling. The bioluminescent sensor, based on protein G–coupled magnetic beads for antibody immobilization, enabled determination of ZEA with a detection limit of 4.2 ng/mL (corresponding to 420 μg/kg in food samples) and an IC50 value of 11.0 ng/mL. The sensor performance was evaluated in spiked maize and wheat samples, with recoveries ranging from 87 to 106% (RSD < 20%, n = 3). Finally, the developed method was applied to the analysis of a naturally contaminated reference matrix material and good agreement with the reported concentrations was obtained.