Person:
Cotillas Soriano, Salvador

Profile Picture
First Name
Salvador
Last Name
Cotillas Soriano
URI
https://hdl.handle.net/20.500.14352/76079
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Químicas
Department
Ingeniería Química y de Materiales
Area
Ingeniería Química
Identifiers
UCM identifierORCIDScopus Author IDWeb of Science ResearcherIDDialnet ID

Filters

20222
Reset filters

Settings

Author: Lorenzo Fernández, David × Subject: 66.0 ×

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Remediation of the Alluvial Aquifer of the Sardas Landfill (Sabiñánigo, Huesca) by Surfactant Application
    (Sustainability, 2022) Guadaño, Joaquín; Gómez, Jorge; Fernández, Jesús; Lorenzo Fernández, David; Dominguez Torre, Carmen M.; Cotillas Soriano, Salvador; García Cervilla, Raúl; Santos López, Aurora
    Sardas Landfill at Sabiñánigo Huesca is polluted with Dense Non-Aqueous Liquid Phases (DNAPLs) composed of a complex mixture of chlorinated organic compounds (COCs). This DNAPL was produced as liquid waste from lindane production being dumped decades ago in the unlined landfills close to the lindane factory. This DNAPL migrated by gravity through the subsurface and accumulated in the contact between the alluvial and marls layers (about 15 m b.g.l.). Seven injections of an aqueous emulsion of a biodegradable non-ionic surfactant (E-Mulse 3®) were carried out at the most polluted areas of the Sardas alluvial. Injections were carried out between April and November 2021 using different surfactant concentrations (6.7, 20, 25 and 50 g/L), injection volumes (0.2 to 7 m3) and injection flow rates (0.08–0.85 m3/h). Injected fluids were extracted in the same well or surrounding wells, and the time elapsed between surfactant injection and extraction varied between 24 and 72 h. A total of 22 m3 were injected into the alluvial, and more than double this injected volume was extracted. Injection and extraction points were in the contact between the marls and the alluvial layer. Extracted fluid accumulated in tanks, and phases separated. DNAPL recovered here was mobilized rather than solubilized and managed as toxic waste. The aqueous supernatant was treated in a wastewater treatment plant with physicochemical treatment (including adsorption in activated carbon) before being discharged into the environment. The transport of the injected fluids was monitored by conductivity profiles using bromide (260–538 mg·L−1) as a conservative tracer. High radial dispersion of the injected fluid was found. Surfactant losses by adsorption in the alluvial and absorption in DNAPL were noticed, and both surfactant and contamination did not escape from the capture zone. Monitoring since 2018 of the COCS in groundwater and the DNAPL presence in the contact between alluvial and marls layers showed a significant reduction of COCs in the treated zone with the surfactant injections.
  • Thumbnail Image
    Item
    LED visible light assisted photochemical oxidation of HCHs in aqueous phases polluted with DNAPL
    (Process Safety and Environmental Protection, 2022) Conte, Leandro O.; Cotillas Soriano, Salvador; Sánchez Yepes, Andrés; Lorenzo Fernández, David; Santos López, Aurora
    This work focuses on removing hexachlorocyclohexanes (HCHs) found in groundwater polluted with dense non-aqueous phase liquids (DNAPLs) by photo-oxidation with hydrogen peroxide or persulfate using LED visible light and ferrioxalate as the catalyst. Single oxidation tests were also performed to evaluate the contribution of LED-vis light on HCHs removal. Results show that it is possible to attain the degradation of HCHs up to 85% in 420 min with persulfate, whereas percentages lower than 40% are obtained when using hydrogen peroxide. Using both oxidants in the presence of ferrioxalate and LED visible light promotes the generation of hydroxyl and sulfate radicals under circumneutral pH values, which are the main responsible species for HCHs removal. Specifically, an oxidant conversion higher than 50% was achieved during the photochemical treatment with both oxidants, whereas conversions below 20% were obtained in the absence of LED visible light irradiation. On the other hand, DNAPL produced as liquid residuum of lindane production contains other chlorinated organic compounds (COCs), which are susceptible to being oxidized by hydroxyl and sulfate radicals, generating competitive oxidation reactions. The final conversion of chlorbenzenes reaches values close to 100% and HCHs are only effectively removed when persulfate is used as the oxidant. This better performance indicates that the photo-oxidation of DNAPL polluted groundwater with LED-vis light should be carried out with persulfate to ensure the removal of more dangerous COCs. This confirms the excellent ability of sulfate radicals for C-Cl bond breakdown.