Person: Fernández Barrenechea, José María
Loading...
First Name
José María
Last Name
Fernández Barrenechea
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Geológicas
Department
Mineralogía y Petrología
Area
Cristalografía y Mineralogía
Identifiers
61 results
Search Results
Now showing 1 - 10 of 61
Item Minerales utilizados en agricultura(Seminarios de la Sociedad Española de Mineralogía, 2005) Rodas González, Magdalena; Fernández Barrenechea, José MaríaItem Sandstone petrography of continental depositional sequences of an intraplate rift basin: western Cameros Basin (North Spain)(Journal of sedimentary research, 2009) Arribas Mocoroa, José; Alonso Millán, Ángela; Mas Mayoral, José Ramón; Tortosa, A.; Rodas, Magdalena; Fernández Barrenechea, José María; Alonso Azcárate, Jacinto; Artigas, RosanaThe Cameros Basin in Central Spain is an intraplate rift basin that developed from Late Jurassic to Middle Albian time along NW–SE trending troughs. The sedimentary basin fill was deposited predominantly in continental environments and comprises several depositional sequences. These sequences consist of fluvial sandstones that commonly pass upward into lacustrine deposits at the top, producing considerable repetition of facies. This study focused on the western sector of the basin, where a total of seven depositional sequences (DS- 1 to DS-7) have been identified. The composition of sandstones permits the characterization of each sequence in terms of both clastic constituents and provenance. In addition, four main petrofacies are identified. Petrofacies A is quartzosedimentolithic (mean of Qm85F2Lt13) and records erosion of marine Jurassic pre-rift cover during deposition of fluvial deposits of DS-1 (Brezales Formation). Petrofacies B is quartzofeldspathic (mean of Qm81F14Lt5) with P/F > 1 at the base. This petrofacies was derived from the erosion of low- to medium-grade metamorphic terranes of the West Asturian–Leonese Zone of the Hesperian Massif during deposition of DS-2 (Jaramillo Formation) and DS-3 (Salcedal Formation). Quartzose sandstones characterize the top of DS-3 (mean of Qm92F4Lt4). Petrofacies C is quartzarenitic (mean of Qm95F3Lt2) with P/F > 1 and was produced by recycling of sedimentary cover (Triassic arkoses and carbonate rocks) in the SW part of the basin (DS-4, Pen˜ - acoba Formation). Finally, depositional sequences 5, 6, and 7 (Pinilla de los Moros–Hortigüela, Pantano, and Abejar–Castrillo de la Reina formations, respectively) contain petrofacies D. This petrofacies is quartzofeldspathic with P/F near zero and a very low concentration of metamorphic rock fragments (from Qm85F11Lt4 in Pantano Formation to Qm73F26Lt1 in Castrillo de la Reina Formation). Petrofacies D was generated by erosion of coarse crystalline plutonics located in the Central Iberian Zone of the Hesperian Massif. In addition to sandstone petrography, these provenance interpretations are supported by clay mineralogy of interbedded shales. Thus, shales related to petrofacies A and C have a variegated composition (illite, kaolinite, and randomly interlayered illite–smectite mixed-layer clays); the presence of chlorite characterizes interbedded shales from petrofacies B; and Illite and kaolinite are the dominant clays associated with petrofacies D. These petrofacies are consistent with the depositional sequences and their hierarchy. An early megacycle, consisting of petrofacies A and B (DS-1 to DS-3) was deposited during the initial stage of rifting, when troughs developed in the West Asturian–Leonese Zone. A second stage of rifting resulted in propagation of trough-bounding faults to the SW, involving the Central Iberian Zone as a source terrane and producing a second megacycle consisting of petrofacies C and D (DS-4, DS-5, DS-6, and DS-7). Sandstone composition has proven to be a powerful tool in basin analysis and related tectonic inferences on intraplate rift basins because of the close correlation that exists between depositional sequences and petrofacies.Item Clay minerals as provenance indicators in continental lacustrine sequences: the Leza Formation, early Cretaceous, Cameros Basin, northern Spain(Clay minerals, 2005) Alonso Azcárate, Jacinto; Rodas, Magdalena; Fernández Barrenechea, José María; Mas Mayoral, José RamónVariations in clay mineral assemblages, changes in KuÈbler index (KI), and the chemical composition of chlorites are used to identify source areas in the lacustrine materials in the Lower Cretaceous Leza Limestone Formation of the Cameros Basin, northern Spain. This formation has fairly homogeneous lithological characteristics and facies associations which do not allow for identification and characterization of local source areas. The Arnedillo lithosome of the Leza Limestone Formation contains a clay mineral association (Mg-chlorite, illite and smectite) indicative of its provenance. Chlorite composition and illite KI values indicate that these minerals were formed at temperatures higher than those reached by the Leza Formation which indicates its detrital origin. The similarity in the Mg-chlorite composition between the Arnedillo lithosome and the Keuper sediments of the area indicates that these materials acted as a local source area. This implies that Triassic sediments were exposed, at least locally, at the time of deposition of the Leza Formation. The presence of smectite in the Leza Formation is related to a retrograde diagenesis event that altered the Mg-chlorites in some samples.Item Mid-Albian to earliest Cenomanian climate cycles indicated by humid paleosols developed within the arid braidplain facies of the Utrillas Group of east-central Spain(Palaeogeography, Palaeoclimatology, Palaeoecology, 2023) Bueno Cebollada, Carlos A.; Horra Del Barco, Raúl De La; Fernández Barrenechea, José María; Meléndez Hevia, María Nieves; Barrón López, Eduardo; Fregenal Martínez, María AntoniaThe development of arid climate conditions in eastern Iberia during the mid-Cretaceous (mid-Albian to earliest Cenomanian) has been postulated by several authors over the last two decades based on sedimentological and palaeobotanical datasets. In this paper, we present a combined sedimentological and paleosol study of the mid-Albian to earliest Cenomanian Utrillas Group in the Cuenca Basin of east-central Spain, to improve knowledge of palaeoclimate. Four facies associations are identified as follows: Proximal alluvial braidplain (FA I), Distal alluvial braidplain (FA II), Aeolian dunes (FA III), and Inner estuarine settings (FA IV). The succession records the development of a braidplain system under dominantly arid conditions followed by a marine transgressive phase. In contrast to the overall arid palaeoclimate interpretation, multi-proxy palaeoedaphological analyses conducted for three paleosol profiles (Spodosols) indicate the occurrence of periods of increased humidity in the basin. These findings allow us to infer the occurrence of shorter-term climatic oscillations characterised by a tropical savanna climate when the palaeosols developed, suggesting significantly more humid conditions than those inferred based on the sedimentological and previous palaeobotanical datasets. We propose a palaeoclimatic model that explains the alternation between the dominantly arid and these more humid periods based on the cyclical latitudinal shifting of the mid-Cretaceous climatic belts, shedding new light on the mid-Albian to earliest Cenomanian climate of Iberia.Item State of a bentonite barrier after 8 years of heating and hydration in the laboratory(Materials Research Society symposia proceedings, 2007) Villar, María Victoria; Fernández, Ana María; Gómez, Roberto; Fernández Barrenechea, José María; Luque Del Villar, Francisco Javier; Martín, Pedro Luis; Barcala, José MiguelThe conditions of the bentonite in an engineered barrier for HLW disposal have been simulated in a laboratory test. Six cylindrical blocks of bentonite compacted at a dry density of 1.64 g/cm3 were piled up in a hermetic Teflon cell. The total length of the clay column inside the cell was 60 cm. The bottom surface of the bentonite was heated at 100°C while the top surface was injected with granitic water. The duration of the test was 7.6 years. The water intake was measured during the test and, at the end, the cell was dismounted and the dry density, water content, mineralogy, geochemistry, and swelling capacity of the clay were measured in different sections along the column. At the end of the test no full water saturation was reached and water content and dry density gradients were found along the column. No mineralogical changes have been detected, although the pore water chemistry and the exchangeable complex of the smectite have changed along the bentonite. None of these changes affect drastically its swelling capacity, which remains high. The material used in this test is the FEBEX bentonite.Item Chlorite, corrensite, and chlorite-mica in Late Jurassic fluvio-lacustrine sediments of the Cameros Basin of Norheastern Spain(Clays and clay minerals, 2000) Fernández Barrenechea, José María; Rodas, Magdalena; Frey, Martín; Alonso Azcárate, Jacinto; Mas Mayoral, José RamónThe distribution and crystal-chemical characteristics of chlorite, eorrensite, and mica in samples from a stratigraphic profile in the Cameros basin are controlled by changes in the sedimentary facies. The lacustrine marls and limestones from the base and the top of the profile contain quartz + calcite + illite ± dolomite ± chlorite ± albite ± paragonite + Na, K-rich mica. Chlorite is rich in Mg, with Fe/ (Fe + Mg) ratios ranging between 0.18-0.37. A formation mechanism involving reaction between Mgrich carbonate and dioctahedral phyllosilicates is proposed for these Mg-rich chlorites, on the basis of the mutually exclusive relationship found between Mg-rich chlorite and dolomite, together with the relative increase in the proportion of calcite in samples containing chlorite. The mudrocks from the middle part of the profile are composed of quartz + albite + illite + corrensite (with a mean coefficient of variability of 0.60%) + chlorite. Corrensite and chlorite are richer in Fe 2+ than those from the base or top of the profile, with mean Fe/(Fe + Mg) ratios of 0.51 and 0.56, respectively. Textural and compositional features suggest a formation mechanism for the corrensite, chlorite, and chlorite-mica crystals through replacement of detrital igneous biotite. Whether or not corrensite occurs with chlorite appears to be related to redox conditions. The presence of corrensite alone is apparently favored by oxidizing conditions, whereas the occurrence of corrensite + chlorite is related to more reducing conditions. Corrensite shows higher Si and Na + K + Ca contents, and slightly lower Fe/(Fe + Mg) ratios than chlorite. The presence of corrensite and the lack of random chlorite-smectite interlayering is discussed in terms of the fluid/rock ratio; the occurrence is related to the hydrothermal character of metamorphism in the Cameros basin.Item Permian-Triassic continental rocks of the SE Iberian Ranges: Architecture, tectonics and geochemical characteristics in the context of a rift basin(2011) López Gómez, Julián; Arche, A.; Horra Del Barco, Raúl De La; Galán-Abellán, B.; Fernández Barrenechea, José MaríaItem Evolución de la mineralogía de arcillas en el tránsito diagénesis-metamorfismo de bajo grado en el grupo Urbión (Cretácico inferior) de la cuenca de los Cameros (Soria-La Rioja)(2002) Fernández Barrenechea, José María; Rodas, Magdalena; Mas, J. RSe ha realizado un estudio de la evolución de la mineralogía de arcillas en los materiales pertenecientes al grupo urbión (cretacico inferior), en las zonas afectadas por diagénesis y metamorfismo de bajo y muy bajo grado, en relación con los medios de sedimentación en la cuenca de los cameros. Se han diferenciado cuatro unidades estratigraficas (a,b,c y d) limitadas por discontinuidades, que van siendo progresivamente mas extensivas. El estudio sedimentologico de estos materiales indica que corresponden a sistemas fluviales meandriformes (con desarrollo de lagos carbonatados someros en el sector oriental), así como a sistemas fluviales entrelazados (borde occidental). El carácter de los sedimentos va siendo gradualmente mas distal hacia el sector oriental de la cuenca. Las muestras correspondientes a las unidades a, b y c en las areas depocentrales presentan una asociación mineralógica característica de condiciones epimetamorficas, mientras que en el sector oriental se estiman condiciones próximas al limite entre anqui-epimetamorfismo. Los valores de "cristalinidad" de la ilita en estas muestras son mayores de lo esperado, debido a la presencia de paragonita e interestratificado moscovita/paragonita asociados a la reflexión a 10 a. Las muestras pertenecientes a la unidad d en las areas depocentrales representan un brusco cambio hacia condiciones anquimetamorficas, marcado por la presencia de pirofilita y rectorita, mientras que en el borde occidental corresponden a diagénesis profunda. Los cambios en las asociaciones de minerales de la arcilla y en los valores de "cristalinidad" se relacionan con la circulación de fluidos hidrotermales asociados a una banda de deformacion, mas que con la profundidad de enterramiento. La litologia (permeabilidad y composición global) es el principal factor que controla la circulación de dichos fluidosItem Early Triassic-Anisian continental sediments from SE Iberian ranges: sedimentological and mineralogical features(Macla, 2008) Galán Abellán, Ana Belén; Fernández Barrenechea, José María; López Gómez, José; Lago San José, Marceliano; Benito Moreno, María IsabelItem Fluid composition and carbon isotope evolution in the Borrowdale graphite deposit (United Kingdom)(Geochimica et Cosmochimica Acta, 2009) Fernández Barrenechea, José María; Luque Del Villar, Francisco Javier; Ortega Menor, Lorena; Rodas González, Magdalena; Millward, David