Person: Álvarez Fernández-Balbuena, Antonio
Loading...
First Name
Antonio
Last Name
Álvarez Fernández-Balbuena
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Óptica y Optometría
Department
Óptica
Area
Optica
Identifiers
14 results
Search Results
Now showing 1 - 10 of 14
Item Advanced daylighting evaluation applied to cultural heritage buildings and museums: Application to the cloister of Santa Maria El Paular(Renewable Energy, 2016) Mayorga Pinilla, Santiago; Vázquez Moliní, Daniel; Álvarez Fernández-Balbuena, Antonio; Hernández Raboso, Gabriel; Herráez, Juan Antonio; Azcutia, Marta; García Botella, ÁngelA method to evaluate the risk of using daylight in museums and cultural heritage exhibitions is presented along this study. Although daylight is an ecological and sustainable source of energy and sometimes also an intrinsic part of the artwork, the use of Natural lighting may cause damages in them due to the difficulty of controlling its variability. The developed method quantifies the damage produced to the artworks by daylight compared to artificial light taking into account the level of radiation and its spectral distribution in space and time by comparison with the damage caused by an Illuminant A (Global Risk Factor). The method, applied to the permanent paintings exhibition in the cloister of the fifteenth century of the Monastery of Santa Maria de El Paular, certifies that the control and exploitation of Natural Light should consider an optimal balance between exposure and damage.Item Efficient and sustainable energy lighting solutions(Proceedings of SPIE, 2019) García Botella, Ángel; Vázquez Moliní, Daniel; García Fernández, Berta; Álvarez Fernández-Balbuena, AntonioThe electric lighting is responsible for 15% of the electricity consumption, the efficiency in this sector has a good progress in recent years, it can still improve more. Conventional energy sources are polluting and limited, so it is essential to use less aggressive energies with the environment. In lighting, this premise is being implemented in a cross-cutting manner, but in response to varied and sometimes contradictory interests. The development of lighting devices based on solar radiation is an inalienable objective, as is the use of artificial lighting sources that are clean with the environment. To achieve these two objectives, it is essential to know and study the design techniques of non-image optics. In the present work we present new systems design techniques and lighting elements: ray tracing optimization technique, light vector field technique. As well as its implementation and application in various areas of lighting: lighting in office buildings, libraries museums. We show that renewable energy strategy in the field of lighting not only produce energy save, also produce good effects in other aspects of human life like well-being, productivity and heritage conservation.Item Smooth light extraction in lighting optical fibre(Illumination Optics II, 2011) Álvarez Fernández-Balbuena, Antonio; Vázquez Molini, Daniel; García Botella, Ángel; Martínez Antón, Juan Carlos; Bernabeu Martínez, Eusebio; Kidger, Tina E.; David, StuartRecent advances in LED technology have relegated the use of optical fibre for general lighting, but there are several applications where it can be used as scanners lighting systems, daylight, cultural heritage lighting, sensors, explosion risky spaces, etc. Nowadays the use of high intensity LED to inject light in optical fibre increases the possibility of conjugate fibre + LED for lighting applications. New optical fibres of plastic materials, high core diameter up to 12.6 mm transmit light with little attenuation in the visible spectrum but there is no an efficient and controlled way to extract the light during the fibre path. Side extracting fibres extracts all the light on 2π angle so is not well suited for controlled lighting. In this paper we present an extraction system for mono-filament optical fibre which provides efficient and controlled light distribution. These lighting parameters can be controlled with an algorithm that set the position, depth and shape of the optical extraction system. The extraction system works by total internal reflection in the core of the fibre with high efficiency and low cost. A 10 m length prototype is made with 45° sectional cuts in the fibre core as extraction system. The system is tested with a 1W white LED illuminator in one side.Item Application of dynamic merit function to nonimaging systems optimization(Optical Engineering, 2015) Álvarez Fernández-Balbuena, Antonio; González Montes, Mario; García Botella, Ángel; Vázquez Moliní, DanielAutomatic optimization algorithms have been recently introduced as nonimaging optics design techniques. Unlike optimization of imaging systems, nonsequential ray tracing simulations and complex noncentered systems design must be considered, adding complexity to the problem. The merit function is a key element in the automatic optimization algorithm; nevertheless, the selection of each objective’s weight, {wi}{wi}, inside the merit function needs a prior trial and error process for each optimization. The problem then is to determine appropriate weights’ values for each objective. We propose a new dynamic merit function with variable weight factors {wi(n)}{wi(n)}. The proposed algorithm automatically adapts weight factors during the evolution of the optimization process. This dynamic merit function avoids the previous trial and error procedure by selecting the right merit function and provides better results than conventional merit functions.Item Optics detailed analysis of an improved collimation system for LED light sources(Illumination Optics II, 2011) González Montes, Mario; Vázquez Molini, Daniel; Álvarez Fernández-Balbuena, Antonio; García Botella, Ángel; Bernabeu Martínez, Eusebio; Kidger, Tina E.; David, StuartThroughout present study will be discusses the influence of the manufacturing margins, adjustment precision and ray model accuracy of a collimating LED unit in the overall system performance. It will be also analyzed the angular performance and the collimated in relation to the relative position of the LED and the collimator's dimensions. Finally the results will be compared with existing publications in this field.Item Hyperparabolic concentrators(Applied Optics, 2009) García Botella, Ángel; Álvarez Fernández-Balbuena, Antonio; Vázquez Molini, Daniel; Bernabeu Martínez, Eusebio; González Cano, AgustínWe present a family of three-dimensional concentrators constructed from the photic field generated by a Lambertian emitter. The profile of these concentrators is obtained from the field lines for a two-dimensional truncated wedge and is based on the union between a hyperbola and a tilted parabola. By revolution of this profile, we obtain hyperparabolic concentrators (HPCs). In the limiting case when the focal length of the hyperbola becomes the radius of the exit aperture, the HPC becomes the well-known compound parabolic concentrator. On the other hand, when the focal length of the hyperbola becomes infinite, the HPC achieves the thermodynamic limit of concentration.Item Advances on geometric flux optical design method(Proceedings of SPIE, 2017) García Botella, Ángel; Álvarez Fernández-Balbuena, Antonio; Vázquez Moliní, DanielNonimaging optics is focused on the study of methods to design concentrators or illuminators systems. It can be included in the area of photometry and radiometry and it is governed by the laws of geometrical optics. The field vector method, which starts with the definition of the irradiance vector E, is one of the techniques used in nonimaging optics. Called “Geometrical flux vector” it has provide ideal designs. The main property of this model is, its ability to estimate how radiant energy is transferred by the optical system, from the concepts of field line, flux tube and pseudopotential surface, overcoming traditional raytrace methods. Nevertheless this model has been developed only at an academic level, where characteristic optical parameters are ideal not real and the studied geometries are simple. The main objective of the present paper is the application of the vector field method to the analysis and design of real concentration and illumination systems. We propose the development of a calculation tool for optical simulations by vector field, using algorithms based on Fermat`s principle, as an alternative to traditional tools for optical simulations by raytrace, based on reflection and refraction law. This new tool provides, first, traditional simulations results: efficiency, illuminance/irradiance calculations, angular distribution of light- with lower computation time, photometrical information needs about a few tens of field lines, in comparison with million rays needed nowadays. On the other hand the tool will provides new information as vector field maps produced by the system, composed by field lines and quasipotential surfaces. We show our first results with the vector field simulation tool.Item Improved and customized secondary optics for photo-voltaic concentrators(Proceedings of SPIE, Nonimaging Optics: Efficient Design for Illumination and Solar Concentration XII, 2015) Vázquez Molini, Daniel; Álvarez Fernández-Balbuena, Antonio; García Botella, Ángel; Alda, JavierIn this contribution the line flow method is applied to an optimized secondary optics in a photovoltaic concentration system where the primary optics is already defined and characterized. This method is a particular application of photic field theory. This method uses the parameterization of a given primary optics, including actual tolerances of the manufacturing process. The design of the secondary optics is constrained by the selection of primary optics and maximizes the concentration at a previously specified collection area. The geometry of the secondary element is calculated by using a virtual source, which sends light in a first concentration step. This allows us to calculate the line flow for this specific case. This concept allows designing more compact and efficient secondary optics of photovoltaic systems.Item Light losses in hollow, prismatic light guides related to prim defects: a transmittance model(Chinese Optics Letters, 2015) García Fernández, Berta; Vázquez Moliní, Daniel; Álvarez Fernández-Balbuena, Antonio; García Botella, Ángel; Martínez Antón, Juan CarlosHollow, cylindrical, prismatic light guides (CPLGs) are optical components that, using total internal reflection (TIR), are able to transmit high-diameter light beams in daylight and artificial lighting applications without relevant losses. It is necessary to study the prism defects of their surfaces to quantify the behavior of these optical components. In this Letter, we analyze a CPLG made of a transparent dielectric material. Scanning electron microscopy (SEM) and the topographic optical profilometry by absorption in fluids (TOPAF) imaging technique are conducted to determine if there are defects in the corners of the prisms. A model for light guide transmittance that is dependent on prism defects is proposed. Finally, a simulation and an experimental study are carried out to check the validity of the proposed model.Item Chromatic perception of non-invasive lighting of cave paintings(Proceedings of SPIE, 2009) Zoido Chamorro, Jesús Manuel; Vázquez Moliní, Daniel; Álvarez Fernández-Balbuena, Antonio; Bernabeu Martínez, Eusebio; García Botella, Ángel; Herráenz Ferreiro, Juan Antonio; Egido Rodríguez, Marian, delThis work is intended to deal with the problems which arise when illuminanting Paleolithic cave paintings. We have carried out the spectral and colorimetric characterization of some paintings located in the Murcielagos (bats) cave (Zuheros, Córdoba, Spain). From this characterization, the chromatic changes produced under different lighting conditions are analysed. The damage function is also computed for the different illuminants used. From the results obtained, it is proposed an illuminant whose spectral distribution diminishes the damage by minimizing the absorption of radiation and optimises the color perception of the paintings in this cave. The procedure followed in this study can be applied to optimise the lighting systems used when illuminating any other art work.