Person: Muñoz Martín, Alfonso
Loading...
First Name
Alfonso
Last Name
Muñoz Martín
Affiliation
Universidad Complutense de Madrid
Faculty / Institute
Ciencias Geológicas
Department
Geodinámica, Estratigrafía y Paleontología
Area
Geodinámica Interna
Identifiers
11 results
Search Results
Now showing 1 - 10 of 11
Item Longest and still longer: The Messejana-Plasencia dyke and its links with later Alpine deformation belt in Iberia(Tectonophysics, 2021) De Vicente Muñoz, Gerardo; Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Cunha, Pedro P.The Messejana-Plasencia dyke (End-Triassic), NE-SW oriented, is the longest simple structure in Iberia (~500 km) and constitutes a first-order rheological discontinuity that crosses the entire crust. During the Alpine deformation, this discontinuity nucleated the Messejana-Plasencia left-lateral strike-slip fault and its related strike-slip deformation belt, consisting of a series of wide coalescent stepovers and small basins developed on the footwalls. Both structures can be followed from offshore of SW mainland Portugal to the central sector of the Spanish-Portuguese Central System. Using tectonic, geophysical, magnetic, and gravimetric analyses, our study demonstrated that it extends NE more than ~100 km below the continental sediments of the Duero Cenozoic Basin, until the Iberian Chain. We used a tectonostratigraphic analysis to determine the age of the wrench fault movement and that of the Spanish-Portuguese thrusts. In this range, the largest displacement during the Cenozoic occurred in the southern thrust of the Spanish sector of the Central System over the Madrid Cenozoic Basin, and NE-SW trending. This thrust displaces the Moho more than 10 km and probably joins the Messejana-lasencia strike-slip fault at depth. The deduced age movement for both is Oligocene-Lower-Middle Miocene, related to the intraplate stresses transmitted from the Pyrenean orogen towards its foreland. A strain partitioning process was then deduced for the simultaneous movement of both main Alpine faults in Central Iberia.Item Análisis de la estructura alpina de la corteza del centro de la Península Ibérica: Una sección Magneto-Telúrica a través del Sistema Central (Sierra de Gredos)(Geotemas, 2012) Pous, Jaume; Muñoz Martín, Alfonso; Olaiz Campos, Antonio José; Seillé, H.; De Vicente Muñoz, GerardoWe present a magnetotelluric profile across the Duero basin, the Central System and the Madrid basin, acquired in the framework of the TOPO-IBERIA project. The MT profile consists of 24 magnetotelluric sites over a 200 km, NS oriented profile. Five components were measured with periods ranging from 0.001 s to 500s. The dimensional analysis reveals a dominant E-W direction and 2D joint inversion of apparent resistivity, phases and tipper was carried out. The inverse resistivity model obtained has been compared with other geological and geophysical data, and it shows a resistive and homogeneous crust that extends towards the Duero basin. The main conductive anomalies are elongated and inclined bodies that are related with the main big–scale Alpine thrusts. Other superficial conductive bodies are related with the tertiary sedimentary basins. [RESUMEN]Este trabajo muestra un nuevo perfil magnetotelúrico (MT) a través del la cuenca del Duero, el Sistema central y la Cuenca de Madrid, adquirido dentro del proyecto TopoIberia. El Perfil MT consiste en 24 sondeos a lo largo de 200 km con una orientación NS. En cada sondeo se han medido cinco componentes con periodos de 0.001 a 500 s. El análisis dimensional revela una dirección dominante E-O y se ha realizado una inversión conjunta en 2D de las resistividades aparentes, fases y tipper. El modelo de resistividades obtenido ha sido comparado con otros datos geológicos y geofísicos, y muestra una estructura cortical homogénea y resistiva que se prolonga hacia la cuenca del Duero. En esta corteza aparecen cuerpos conductores inclinados y alargados en profundidad asociados a grandes cabalgamientos alpinos. Otros cuerpos conductores superficiales están claramente relacionados con las cuencas sedimentarias terciariasItem Análisis de la sensibilidad de las estimaciones de la profundidad del basamento en la cuenca de Madrid (España Central)(Geotemas, 2012) Olaiz Campos, Antonio José; Muñoz Martín, Alfonso; Gascone, L.; De Vicente Muñoz, Gerardo; Mantilla Pimiento, A.The Madrid basin, over 20.000 km2 , located in Central Spain. Its evolution is conditioned by basement uplifts (Central System and Toledo Mountains) during the Alpine orogeny. The Madrid basin is connected with the Loranca basin at its NE corner and with La Mancha basin to the south. Sediment thickness accumulated from Late Cretaceous to the Late Miocene, is about 3.000 m at Pradillo well, but from seismic interpretation, a depocenter associated to Central System South Thrust is inferred. For this study four different methodologies were used(“Euler Deconvolution”, “Source Parameter Imaging”, “Analytic Signal” and “Tilt Depth”), in order to obtain depth to basement estimations from aermagnetic data. These methods work for simplified source geometries, estimating depths as a good starting point for a structural interpretation. In Madrid Basin, this knowledge is important due to the geothermal and hydrological potential of the basin, as well as for CO2 storage. [RESUMEN]La cuenca de Madrid, con un área aproximada de 20.000 km2, se extiende en la zona central de la Península Ibérica. Su evolución está condicionada por el levantamiento del Sistema Central y de los Montes de Toledo durante la orogenia Alpina. La cuenca de Madrid está conectada con las cuencas de Loranca, en su límite NE, y de La Mancha por el sur. El espesor de sedimentos, con registro continuo desde el Cretácico Superior hasta el Mioceno Superior, alcanza los 3000 m en el pozo Pradillo, aunque de la interpretación sísmica se obtiene un depocentro, de mayor profundidad, adosado al cabalgamiento del Borde Sur del Sistema Central . En este trabajo se han seguido distintas metodologías para estimar la profundidad del basamento, a partir de datos aeromagnéticos. Los distintos métodos (“Deconvolucion de Euler”, “Source Parameter Imaging”, “Analytic Signal” y “Tilt Depth”) tienen en común que asumen geometrías sencillas, pero los resultados obtenidos resultan de gran interés para la interpretación estructural del basamento. En el caso de la cuenca de Madrid, este conocimiento es muy importante dado su potencial geotérmico e hidrogeológico, así como un posible uso como almacenamiento geológico.Item Caracterización de la geometría de la depresión de Navamuño (Sistema Central Español) aplicando técnicas geofísicas(Geogaceta, 2015) Carrasco González, Rosa María; Sánchez, Jesús; Muñoz Martín, Alfonso; De Pedraza, Javier; Olaiz Campos, Antonio José; Ruiz Zapata, María Blanca; Abel-Schaad, Daniel; Merlo, Oscar; Domínguez Villar, DavidLa depresión de Navamuño se localiza en el tramo de cabecera del valle del río Cuerpo de Hombre (Sierra de Béjar), que durante el Pleistoceno Superior fue ocupado por un glaciar. Se trata de una cubeta tipo nava con una superficie de ~14 Ha, limitada entre laderas correspondientes a escarpes de línea de falla y la morrena lateral izquierda del paleoglaciar de Cuerpo de Hombre. Para conocer la geometría y el espesor de sedimentos de la cuenca así como sus relaciones con las estructuras y formaciones que la delimitan, se han realizado 9 perfiles de tomografía de resistividad eléctrica (TRE) en dos dimensiones (2D), apoyada en 9 sondeos eléctricos verticales (SEV) y dos sondeos mecánicos. Las interpretaciones sugieren un relleno sedimentario de la cubeta de más de unos 20 m de espesor. Genéticamente se interpreta como una cubeta rellena por sedimentos de origen fluvioglaciar y fluviotorrencial, con episodios de tipo lacustre locales y someros.Item Variscan inheritance induces Alpine upper crustal delamination in East Spanish–Portuguese Central System(Tectonics, 2022) De Vicente Muñoz, Gerardo; Díez Fernández, Rubén; Olaiz Campos, Antonio José; Muñoz Martín, AlfonsoThe Spanish–Portuguese Central System (SPCS) is an Alpine Mountain range with crystalline basement characterised by a two-layer rheological structure. This structure formed after primary (protolith) and secondary (tectonometamorphic) processes during the extensional collapse of the Variscan Orogen. The SPCS structure is usually controlled by foreland-directed thrusts and strike-slip faults. However, the eastern SPCS is dominated by NW-directed, imbricate backthrusts and lacks the main thrust directed to the foreland basin located southeast of the mountain range (Madrid Cenozoic Basin). The SPCS exhibits a crustal root (> 40 km depth) supporting SE-directed crustal-scale thrusting. Alpine backthrusts sole into an SE-dipping décollement within the Variscan basement. Variscan extension-related structures parallel the SE-dipping geometry of Alpine backthrusts, so they provided favourably oriented rheological weaknesses to accommodate Alpine shortening. Backthrusts geometry, their hanging wall position within the fault that raised the SPCS and gravity modelling support an Alpine crustal delamination process. Tectonic wedging and delamination of the more competent basement occurred in the footwall of Variscan extensional faults (Daurius domain), which enforced the shearing off of a rheologically weaker upper layer of the crust, located in the hanging wall of the Variscan extensional faults (Arriaca domain) by inverting Variscan extensional faults. This led to NW-directed incipient continental subduction of the weaker crust. Intraplate subduction and crustal delamination can be independent from lithosphere-scale inheritance and be conditioned by structural inheritance in the overlying crust. Alpine shortening for the Cretaceous cover is around 17.7 km (10.5% shortening), and 11 km (7%) for the upper-lower crust limit.Item Geometría y modelado numérico de los cabalgamientos Alpinos y de los pliegues de propagación de falla asociados en el macizo de Honrubia-Sepúlveda (Sistema Central)(Geotemas, 2024) Muñoz Cemillán, Alfonso; Muñoz Martín, Alfonso; Vicente Muñoz, Gerardo De; Olaiz Campos, Antonio JoséEl sector de Honrubia-Sepúlveda (Norte del Sistema Central) se caracteriza por presentar una serie de cabalgamientos imbricados con basamento implicado y vergencia hacia el norte. Estos cabalgamientos desarrollan pliegues de propagación de falla en la cobertera mesozoica con flancos largos de bajo buzamiento hacia el sur (entre 2 y 5º). Dada la ausencia de datos en profundidad, y debido a su estilo “de piel fina con basamento implicado”, algunos autores interpretan la presencia de un nivel de despegue relativamente somero en profundidad. Para discutir esta estructura se han analizado y modelizado con el método de trishear uno de estos pliegues que presentan mejor desarrollo (Allmendinger, 1998). Los resultados de la modelización sugieren desechar la presencia de geometrías rampa-rellano, y la ausencia de un nivel de despegue común superficial para los cabalgamientos. Los resultados obtenidos también descartan otras geometrías de la rampa, como son las de un aumento del buzamiento de los cabalgamientos en profundidad, o rampas con geometrías lístricas. Los modelos que mejor explican la geometría del pliegue de propagación se generan mediante fallas inversas de buzamiento constante (entre 40 y 50º), valores de p/s entre 1.5 y 1.8 y ángulos de trishear estrechos (de unos 60º).Item Mapa de esfuerzos activos en línea de la Península Ibérica a partir de Mecanismos Focales calculados desde el Tensor de Momento Sísmico(Geotemas, 2012) Muñoz Martín, Alfonso; De Vicente Muñoz, Gerardo; Olaiz Campos, Antonio José; Antón López, Loreto; Vegas, Ramón; Granja Bruña, José LuisThis work shows a new on-line stress map for Iberian Peninsula obtained from the inversion of earthquakes focal mechanisms calculated with the centroid moment tensor. An amount of 299 focal mechanisms have been selected with several quality criteria from different catalogues (CMT Harvard, ETH, Med-Net, I.G.N. and I.A.G.) from 1973 to January 2012. Values for the maximum horizontal stress and the shape factor of the ellipsoid (horizontal/vertical stress) have been calculated following De Vicente et al. (2008).. The local results have been interpolated to a 10’ regular grid in which the relation between tectonic horizontal stress and vertical load has been taken into account. The final map shows a good correlation with the primary tectonic forces generated in the plate boundaries and the local perturbations related with main crustal heterogeneities. Both the maps and data are free for download from http://www.ucm.es/info/lta/lta.html Applied Tectonophysics Group WebSite). [RESUMEN]Este trabajo muestra el nuevo mapa en línea de esfuerzos activos para la Península Ibérica obtenido a partir de la inversión de mecanismos focales de terremotos (MF) calculados con Tensor de Momento Sísmico (TMS). Un total de 299 MF han sido seleccionados con varios criterios de calidad de diferentes catálogos (CMT Harvard, ETH, Med-Net, I.G.N. e I.A.G.), para un periodo comprendido entre 1973 y enero de 2012 y profundidades menores de 60 km. Los valores de la dirección de máximo acortamiento horizontal (Dey) y el factor de forma (carga horizontal/vertical) han sido calculados siguiendo a De Vicente et al. (2008). Los resultados obtenidos se han interpolado a una malla regular de 10’, teniendo en cuenta las orientaciones de las componentes horizontales de esfuerzo, y el factor de forma. Los mapas finales muestran una buena correlación con indicadores geológicos y cinemáticos. Las orientaciones de los esfuerzos horizontales se relacionan con las fuerzas primarias provenientes de los límites de placas, y con perturbaciones locales relacionadas con heterogeneidades de primer orden a nivel cortical. Tanto los mapas, como los datos procesados son accesibles a través de la Web del Grupo de Tectonofísica Aplicada de la UCM http://www.ucm.es/info/lta/lta.html.Item Geothermal Potential of Madrid Basin from Integrated Geophysical and Well Data Analysis (Central Spain)(Conference Proceedings, 83rd EAGE Annual Conference & Exhibition, 2022) Berriolópez, M.A.; Muñoz Martín, Alfonso; Olaiz Campos, Antonio José; Zamora Valcarce, GonzaloNew energy demand linked to world population growth and awareness about climate change have brought out the need to develop new forms of energy guided by the urgency of an ecological transition. In this context geothermal resources have the potential of contributing significantly to sustainable use in many parts of the world. In Spain, during the 80´s, oil and gas explorations carried out in the Madrid Basin confirmed the existence of two geothermal reservoirs. Here we present diverse geological features of the basin essential in geothermal exploration. We use airborne radiogenic and magnetic data to characterize the basement. Detailed ground concentration estimates of the heat producing elements are used to calculate the heat production and heat flow in the near surface. The distribution pattern of both parameters is heterogeneous with two main areas separated by southward prolongation of the Berzosa Fault. The eastern sector is characterized by both low heat production and heat flow rates while the western area is distinguished by high values as a response of the exposed granites. In addition, we build one 3D geological model and one 3D isothermal model with Leapfrog Geothermal from seismic, well data and mapping information.Item The Spanish-Portuguese Central System: An Example of Intense Intraplate Deformation and Strain Partitioning(Tectonics, 2018) De Vicente Muñoz, Gerardo; Cunha, P.P.; Muñoz Martín, Alfonso; Cloetingh, S.A.P.L.; Olaiz Campos, Antonio José; Vegas, RamónThe intraplate deformation of Iberia during the Cenozoic produced a series of ranges and deformation belts with a wide variety of structural trends. The Spanish-Portuguese Central System is the most prominent feature crossing over the whole of central Iberia. It is a large thick-skinned crustal pop-up with NE-SW to E-W thrusts. However, the 500-km-long left-lateral strike-slip Messejana-Plasencia fault, also NE-SW oriented, bends these thrusts to produce NE-SW local paleostresses close to the fault, which seems to be consistent with a common deformational arrangement. This is also supported by the similar sedimentary infilling characteristics found in the surrounding Cenozoic basins. The moment of the maximum intraplate deformation is registered at the same time in all these basins during the upper Priabonian-lower Chattian. As there are two possible sources for the intraplate compressive stresses, the Pyrenean (N-S shortening) orogen to the north and the Betic (NW-SE shortening) orogen to the south, neither can simply explain both simultaneous movements (NE-SW strike-slip and NE-SW thrusting). The deduced age of the main deformation indicates a Pyrenean origin. In contrast, the concept of strain partitioning between the two types of faults gives as a result an overall north trending compression. Existing data do not support crustal detachment from the Betics neither from the Pyrenees but are consistent with a crustal uplift related to lithospheric folding. The subsequent Betic-related stress field only slightly reworked previously Pyrenean-related structures, except for the Portuguese sector, where tectonic activity occurred mainly in the Upper Miocene.Item Near surface geophysical analysis of the Navamuño depression (Sierra de Béjar, Iberian Central System): Geometry, sedimentary infill and genetic implications of tectonic and glacial footprint(Geomorphology, 2018) Carrasco González, Rosa María; Turu, Valenti; Pedraza Gilsanz, Javier de; Muñoz Martín, Alfonso; Ros, Xavier; Sánchez Vizcaíno, Jesús; Ruiz Zapata, Blanca; Olaiz Campos, Antonio José; Herrero-Simon, RamónThe geometric and genetic characterization of the Navamuño depression peatland system (Iberian Central System) is presented here using results from a geophysical survey. This depression is a ~30 ha pseudo-endorheic flat basin over granitic bedrock. Three geophysical techniques were used to map the subsurface geology, and identify and describe the infill sequence: shallow seismic refraction (SR), magnetic resonance sounding (MRS) and electrical resistivity measurements (VES and ERT). The three main geoelectrical layers (G1, G2, G3) identified in previous research, have also been identified in the present work. Using the data obtained in this new research we have been able to analyse these three geological layers in detail and reinterpret them. They can be grouped genetically into two sedimentary units: an ancient sedimentary body (G3), of unknown age and type, beneath an Upper Pleistocene (G2) and Holocene (G1) sedimentary infill. The facies distribution and geometry of the Upper Pleistocene was examined using the Sequence Stratigraphy method, revealing that the Navamuño depression was an ice-dammed in the last glacial cycle resulting in glaciolacustrine sedimentation. A highly permeable sedimentary layer or regolith exists beneath the glaciolacustrine deposits. Below 40 m depth, water content falls dramatically down to a depth of 80 m where unweathered bedrock may be present. The information obtained from geophysical, geological and geomorphological studies carried out in this research, enabled us to consider various hypotheses as to the origin of this depression. According to these data, the Navamuño depression may be explained as the result of a transtensional process from the Puerto de Navamuño strike-slip fault during the reactivation of the Iberian Central System (Paleogene-Lower Miocene, Alpine orogeny), and can be correlated with the pull-apart type basins described in these areas. The neotectonic activity of this fault and the icedammed processes in these areas during the Last Glacial Cycle (MIS2) were the main causes of recent sedimentary infill in this depression.