Person:
Moreno Martín, Gustavo

First Name

Gustavo

Last Name

Moreno Martín

URI

https://hdl.handle.net/20.500.14352/85743

Affiliation

Universidad Complutense de Madrid

Faculty / Institute

Ciencias Químicas

Department

Química Analítica

Identifiers

Full item page

Search Results

Now showing 1 - 10 of 16

Project number: 202
ODS con mucha ciencia: Hacia una enseñanza STEM y más allá
(2022) Gracia Lor, Emma; Blanco Asenjo, Miriam; Espada Bernabé, Elena; Fernández Bautista, Tamara; Gómez Castro, Emilio; Gómez Mejía, Esther; Gómez Gómez, Beatriz; Lorente Arévalo, Álvaro; Moreno Martín, Gustavo; Muñoz Olivas, María Riansares; Muñoz San Martín, Cristina; Oro Carretero, Paloma de; Pérez Corona, María Teresa; Romero Sánchez, Iván; Sacristán Navarro, Iván; Vicente Zurdo, David
Memoria del proyecto de innovación titulado "ODS con mucha ciencia: Hacia una enseñanza STEM y más allá" de la convocatoria 2021-2022. El proyecto se ha centrado en fomentar el interés de los estudiantes de ESO y Bachillerato por la ciencia, proporcionándoles herramientas para que desarrollen competencias STEM a través de charlas de divulgación, talleres experimentales y sesiones de mentoría.
Caracterización y transformación de nanopartículas metálicas y de metaloides en muestras biológicas y medioambientales
(2022) Moreno Martín, Gustavo; Madrid Albarrán, Yolanda; León González, María Eugenia de
La nanotecnología, y en particular las nanopartículas metálicas y de metaloides han demostrado ser de gran utilidad en aplicaciones relacionadas con la salud, el medioambiente, la tecnología o la alimentación. Sin embargo, su liberación al medioambiente a lo largo de su ciclo de utilización puede constituir un riesgo potencial y poco conocido para la salud, el medioambiente y los ecosistemas. Las nanopartículas una vez que llegan al medioambiente e interaccionan con las sustancias químicas del entorno o con sistemas biológicos pueden experimentar modificaciones en sus propiedades fisicoquímicas (tamaño, morfología, estado de agregación, carga superficial, procesos de disolución o transformación a otras especies químicas del mismo elemento). Todo ello afectará sin duda a su destino final e impacto sobre los ecosistemas. En este sentido, la Química Analítica, juega un papel clave para establecer dichas transformaciones, mediante el desarrollo de nuevas estrategias y/o la adaptación y combinación de técnicas y métodos existentes. La presente Tesis Doctoral titulada “Caracterización y transformación de nanopartículas metálicas y de metaloides en muestras biológicas y medioambientales” aborda esta problemática mediante el desarrollo de metodologías analíticas que permitan caracterizar y estudiar las transformaciones que sufren las nanopartículas metálicas de plata (AgNPs) y de oro (AuNPs) al estar en contacto con muestras medioambientales de distinta naturaleza, y las nanopartículas de selenio (SeNPs) en su interacción con sistemas biológicos como plantas y bacterias...
Aprendizaje-Servicio para trasladar los resultados desarrollo sostenible: del laboratorio a la sociedad
(2021) Gracia Lor, Emma; Gómez Mejía, Esther; Moreno Martín, Gustavo; Gómez Gómez, Beatriz; Vicente Zurdo, David; Pérez Corona, María Teresa; Muñoz Olivas, María Riansares; Gómez Castro, Emilio
El objetivo general planteado en este proyecto ha sido comunicar y concienciar a los estudiantes de secundaria y bachillerato sobre la necesidad de un desarrollo sostenible, con el fin de que sean capaces de comprender e identificar las problemáticas asociadas a los objetivos planteados en la Agenda 2030 y asociarlas con actividades propias de la vida cotidiana. De esta manera, los alumnos podrán adquirir herramientas de gran utilidad para el desarrollo de su futura vida personal y profesional. Para lograr dichos objetivos se han llevado a cabo una serie de actividades (charlas de divulgación científica, debates, uso de la aplicación Kahoot) en diferentes centros educativos no universitarios, en concreto, en tres institutos de educación secundaria y bachillerato (IES) y en un centro de educación de personas adultas (CEPA). Los temas tratados se encuadran dentro de los Objetivos de Desarrollo Sostenible (ODS) de la Agenda 2030, concretamente los ODS 2, 3 y 12.
Project number: 283
La divulgación científica como herramienta para promover el desarrollo sostenible: de la universidad a la sociedad
(2021) Gracia Lor, Emma; Muñoz Olivas, María Riansares; Pérez Corona, María Teresa; Gómez Castro, Emilio; Gómez Mejía, Esther; Moreno Martín, Gustavo; Vicente Zurdo, David; Gómez Gómez, Beatriz
Memoria del proyecto de innovación titulado "La divulgación científica como herramienta para promover el desarrollo sostenible: de la universidad a la sociedad" de la convocatoria 2020-2021. El proyecto se ha centrado en promover una educación de calidad mediante la transferencia de conocimientos científicos relacionados con los Objetivos de Desarrollo Sostenible 2, 3 y 12 de la Agenda 2030 y el desarrollo de pensamiento crítico científico-divulgativo tanto del alumnado procedente de centros educativos de secundaria y bachillerato como de los estudiantes de universidad.
Simultaneous determination of the size and concentration of AgNPs in water samples by UV–vis spectrophotometry and chemometrics tools
(Talanta, 2018) Moreno Martín, Gustavo; León González, María Eugenia De; Madrid Albarrán, María Yolanda
The combination of UV–vis spectrophotometry with a chemometric calibration tool based on partial least squares (PLS) has allowed us the development of a multivariate analytical method that simultaneously estimates the concentration and size of mixtures of silver nanoparticles (AgNPs) in environmental water samples. The method is based on changes in the surface plasmon resonance band (SPRB) of AgNPs when they form aggregated/assembled structures with L-cysteine (L-cys). Measurementts were performed by employed a fixed-time kinetics method that implies that the final spectra (response) are obtained by subtstracting the solutions spectra at fixed times. Optimization of experimental conditions affecting aggregation such as time, temperature, pH and concentration of aggregating substance was performed by experimental design and response surface methodologies (RSM). A multivariate calibration model using AgNPs of known diameter size ((20 ± 3), (41 ± 3), (59 ± 5) and (79 ± 7) nm) within a concentration range between 0.62 and 2.5 mg L−1 was constructed by using a mixture experimental design and PLS. The method was finally applied to estimate size and concentration of AgNPs in AgNPs-spiked river and tap water samples. Water samples were spiked with individual, binary and ternary mixtures of AgNPs of different sizes and by using two types of AgNPs: citrate-coated AgNPs (cit-AgNPs) and polyvinylpyrrolidone-coated AgNPs (PVP-AgNPs). A good correspondence was obtained between predicted values and the total amount of AgNPs added with recovery values ranged within 80–160% for the individual mixtures, 68–108% for the binary mixtures and 60–64% for the ternary mixtures of AgNPs. Finally, transmission electron microscopy (TEM) measurements were performed for those cases where discrepancies between the expected and the obtained values were observed. TEM micrographs evidenced the presence of agglomerates or aggregates of AgNPs in some of the mixtures or water tested.
Evaluation of the transformation of selenite and selenium nanoparticles to seleno-amino acids produced by Escherichia coli and Staphylococcus aureus by using liquid chromatography -inductively coupled plasma mass spectrometry and single-particle- inductively coupled plasma mass spectrometry and different sample treatments
(Spectrochimica Acta Part B: Atomic Spectroscopy, 2023) Moreno Martín, Gustavo; Espada-Bernabé, Elena; Gómez Gómez, Beatriz; León González, María Eugenia De; Madrid Albarrán, María Yolanda
Due to the scarce knowledge about the impact of selenium nanoparticles (SeNPs) on bacterial populations, the main objective of this work was focused on evaluating the transformations of SeNPs and selenite in Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). For this purpose, an analytical methodology based on bacteria cell wall disruption, carbamidomethylation, enzymatic hydrolysis and high-performance liquid chromatography couple to inductively coupled plasma mass spectrometry (HPLC-ICP-MS) and HPLC- electrospray tandem mass spectrometry (HPLC-ESI-MS/MS) measurements was developed, the latter for unambiguous identification of selenium species. Once bacteria were cultured in the presence of chitosan modified SeNPs (Ch-SeNPs) and selenite at 0, 1 and 2 mg L􀀀 1 Se for 24 h, an enzymatic disruption of the bacterial cell wall using lysozym followed by enzymatic hydrolysis with protease was applied. The use of lysozyme to extract selenium speciesprovided a better efficiency in the total selenium content (higher than 96%), compared to a mechanical disruption of the bacterial cell wall. Analysis of the extracts by anionic exchange HPLC-ICP-MS showed a strong influence of incubation time with protease (24, 48 and 72 h) on selenium chromatographic profile. The results showed that selenocysteine (SeCys) was the only Se species identified in both bacteria representing an 80% of total selenium accumulated. The confirmation of the identity of this Se species was carried out after performing a carbamidomethylation process, prior to enzymatic hydrolysis, and analyzing the extract by reversed phase HPLCESI- MS/MS. These analyses confirmed the presence of SeCys, and no relevant differences were found between the metabolic pathway of both forms of selenium. Moreover, the growth of both bacterial species in the presence of selenite resulted in the formation of biogenic SeNPs. Characterization by TEM before and after their separation from the culture medium showed spherical and monodispersed nanoparticles with an average size (155 ± 19) nm and (172 ± 20) nm for E. coli and S. aureus, respectively. Analysis by spICP-MS showed no significant differences in size with respect to TEM after considering the ionization efficiency of Se.
In-vivo solid phase microextraction for quantitative analysis of volatile organoselenium compounds in plants
(Analytica Chimica Acta, 2019) Moreno Martín, Gustavo; Sanz Landaluce, Jon; León González, María Eugenia De; Madrid Albarrán, María Yolanda; Elsevier
A new calibration method based on the use of headspace solid-phase microextraction (HS-SPME) and in-fiber internal standardization, combined with gas chromatography coupled to mass spectrometry (GC/MS) was developed for quantifying Se volatile organic species released by plants exposed to chitosan-modified selenium nanoparticles (Cs-SeNPs). The effect of several parameters affecting extraction and separation of the selected organic species of selenium (dimethylselenium (DMSe), diethylselenium (DESe) and dimethyldiselenium (DMDSe)) and deuterated dimethyl sulphide (d6-DMS) employed as internal standard were studied and optimized using an experimental design. The developed methodology was applied for quantifying the volatile selenium compounds produced over time by the plant species Raphanus sativus and Brassica juncea grown in hydroponic solution containing 5 mg Se L−1 in the form Cs-SeNPs. The procedure employed consisted in two steps. Volatile selenium species released from the plants were first extracted in the SPME fiber located at the headspace of a box with a fixed volume. Subsequently, the internal standard placed in a vial subjected to the same conditions as plants was extracted on the same fiber than the one previously used for extracting selenium compounds. Finally the extracted compounds were separated and analyzed by GC/MS. Results evidenced Cs-SeNPs biotransformation into DMSe and DMDSe by both plants species during growing stage, in amounts of the order of ng. Additionally, the resulting data were submitted to multifactorial ANOVA to evaluate the influence of plant type and time of exposure to Cs-SeNPs on the production of volatile selenium compounds.
In vivo quantification of volatile organoselenium compounds released by bacteria exposed to selenium with HS-SPME-GC-MS. Effect of selenite and selenium nanoparticles
(Talanta, 2021) Moreno Martín, Gustavo; Sanz Landaluce, Jon; León González, María Eugenia De; Madrid Albarrán, María Yolanda; Elsevier
Quantification of volatile organoselenium species released by Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), after their growth in the presence of 1 and 2 mg Se⋅L-1 as both selenite and chitosan modified selenium nanoparticles (Ch-SeNPs), was achieved by the application of a method based on headspace solid-phase microextraction (HS-SPME) and in-fiber internal standardization, combined with gas chromatography coupled to mass spectrometry (GC-MS). This method consisted of an initial extraction of the released volatile organoselenium compounds on the SPME fiber, followed by the extraction of internal standard (IS), deuterated dimethyl sulfide (d6-DMS), on the same fiber before its desorption at the injection port of GC-MS. The results showed that the biotransformation of selenite and Ch-SeNPs into volatile organoselenium compounds was dependent on both the type of bacterial species and the chemical form of selenium (Se) administered. In this sense, E. coli was able to biotransform both selenite and Ch-SeNPs into dimethylselenium (DMSe) and dimethyldiselenium (DMDSe) while S. aureus, biotransformed selenite into DMSe and DMDSe and, Ch-SeNPs only into DMDSe. Additionally, the formation of a volatile mixed sulfur/selenium compound, dimethyl selenenyl sulfide (DMSeS), from Se in nanoparticulated form has been detected for the first time.
Assesing the behaviour of particulate/nanoparticulate form of E171 (TiO2) food additive in colored chocolate candies before and after in vitro oral ingestion by spICP-MS, TEM and cellular in vitro models
(Food Chemistry, 2023) Espada-Bernabé, Elena; Moreno Martín, Gustavo; Gómez Gómez, Beatriz; Madrid Albarrán, María Yolanda
Potential risk of nanoparticles present in food additives should be assessed. Although food-grade additive E171 (TiO2) has been banned by European Union due to the potential occurrence of nanometric TiO2, it is still present in stock products and permitted in other countries. TiO2 (nano)particles from the outer coating of colored chocolate candies were determined by TEM (Transmission Electron Microscopy), ICP-MS (Inductively Coupled Plasma Mass Spectrometry) and spICP-MS (Single-Particle-ICP-MS). Total titanium content was in the range of 1219 ± 83 μg/g, except for brown and white candies. Percentage of TiO2 particles bellow 100 nm was under 25% regardless the color, with most frequent size between 120 and 160 nm. In vitro gastrointestinal assays reveal differences in bioaccessibility percentages between whole candy (14%) or aqueous extracts of the coating of candy (37%). More than 90% of bioaccessible titanium was found in particulate form. Caco-2 cells viability decreased around 65% after 24 h exposed to intestinal fraction.
Selenium stress response of the fruit origin strain Fructobacillus tropaeoli CRL 2034
(Applied Microbiology and Biotechnology, 2023) Martínez, Fernando Gabriel; Moreno Martín, Gustavo; Mozzi, Fernanda; Madrid Albarrán, María Yolanda; Pescuma, Micaela
The fruit-origin strain Fructobacillus tropaeoli CRL 2034 can biotransform selenium into seleno-nanoparticles and selenocysteine. The proteomic analysis of F. tropaeoli CRL 2034 exposed to 5 and 100 ppm of Se showed a dose-dependent response since 19 and 77 proteins were deregulated, respectively. In the presence of 5 ppm of Se, the deregulated proteins mainly belonged to the categories of energy production and conversion or had unknown functions, while when cells were grown with 100 ppm of Se, most of the proteins were grouped into amino acid transport and metabolism, nucleotide transport and metabolism, or into unknown functions. However, under both Se conditions, glutathione reductases were overexpressed (1.8–3.1-fold), while mannitol 2-dehydrogenase was downregulated (0.54–0.19-fold), both enzymes related to oxidative stress functions. Mannitol 2-dehydrogenase was the only enzyme found that contained SeCys, and its activity was 1.27-fold increased after 5 ppm of Se exposure. Our results suggest that F. tropaeoli CRL 2034 counteracts Se stress by overexpressing proteins related to oxidative stress resistance and changing the membrane hydrophobicity, which may improve its survival under (food) storage and positively influence its adhesion to intestinal cells. Selenized cells of F. tropaeoli CRL 2034 could be used for producing Se-enriched fermented foods. Graphical Abstract: [Figure not available: see fulltext.] Key points: • Selenized cells of F. tropaeoli showed enhanced resistance to oxidative stress. • SeCys was found in the Fructobacillus mannitol 2-dehydrogenase polypeptide chain. • F. tropaeoli mannitol 2-dehydrogenase activity was highest when exposed to selenium.