Evaluation of the adsorptive and catalytic properties of sludge-based carbon materials for the efficient removal of antibiotics listed in the European Decision 2020/1161/EU

Álvarez Torrellas, Silvia; Segura, Yolanda; de Mora, A.; Gutiérrez Sánchez, Pablo; Sanz Santos, Eva; Corrochano, Noelia; Larriba Martínez, Marcos; Pariente, M. I.; Martínez, Fernando; García, Juan José

Evaluation of the adsorptive and catalytic properties of sludge-based carbon materials for the efficient removal of antibiotics listed in the European Decision 2020/1161/EU

Download

Evaluation of the adsorptive and catalytic properties.pdf (4.66 MB)

Official URL

https://doi.org/10.1016/j.jece.2023.110743

Publication date

2023

Publisher

Elsevier

Citations

Exportar

URI

https://hdl.handle.net/20.500.14352/105112

Citation

S. Álvarez-Torrellas, Y. Segura, A. de Mora, P. Gutiérrez-Sánchez, E. Sanz-Santos, N. Corrochano, M. Larriba, M.I. Pariente, F. Martínez, J. García, Evaluation of the adsorptive and catalytic properties of sludge-based carbon materials for the efficient removal of antibiotics listed in the European Decision 2020/1161/EU, Journal of Environmental Chemical Engineering, Volume 11, Issue 5, 2023, 110743, ISSN 2213-3437,

Abstract

In this work, sludge from an oily refinery and urban wastewater treatment plant have been used for the synthesis of activated carbons using ZnCl2 and KOH as activating agents. The materials were used as adsorbents and catalysts for the removal of three antibiotics, e.g., sulfamethoxazole (SMX), trimethoprim (TMP) and ciprofloxacin (CPX). The activated carbons have been fully characterized. Thus, the BET surface area of the materials ranged from 183 to 784 m2/g. Qe values of 127.3 mg/g for SMX onto U-ZnCl2; 168.5, and 179.6 mg/g for TMP and CPX, respectively, onto R-KOH were obtained. The best fitting of kinetic data was found by using pseudo-second order (PSO) model, while Freundlich and Liu models successfully fitted the equilibrium adsorption isotherms. SMX, TMP and CPX adsorption mechanisms were governed by pore filling, π-π interactions and H-bonds. R-KOH material was used for wastewater treatment, finding that the adsorption capacity decreased due to a competitive effect. Regarding the Fenton process, the U-ZnCl2 carbon achieved the total SMX degradation after 60 min. In contrast, TMP and CPX showed the highest depletion in only 20 min. The higher performances of the U-ZnCl2 material may be due to a higher C/O ratio and high N and Zn contents. In the experiments with a real aqueous matrix, similar conversions were achieved, although the kinetic constants resulted in slightly lower values. So, it could be stated that adsorption and Fenton oxidation performance were influenced by the different properties of the carbon materials.