Aviso: para depositar documentos, por favor, inicia sesión e identifícate con tu cuenta de correo institucional de la UCM con el botón MI CUENTA UCM. No emplees la opción AUTENTICACIÓN CON CONTRASEÑA
 

Physical properties of high pressure reactively sputtered TiO2

dc.contributor.authorMartil De La Plaza, Ignacio
dc.contributor.authorGonzález Díaz, Germán
dc.contributor.authorPrado Millán, Álvaro Del
dc.contributor.authorSan Andrés Serrano, Enrique
dc.date.accessioned2023-06-20T10:44:19Z
dc.date.available2023-06-20T10:44:19Z
dc.date.issued2005-11
dc.description© 2005 American Vacuum Society. The authors acknowledge C.A.I. de Implantación Iónica (U.C.M.) for technical support, C.A.I. de espectroscopía for FTIR measurements and C.A.I. de difracción de rayos X for x-ray characterization. This work was partially supported by the Spanish M.E.C., under Contract Nos. T.I.C. 01-1253 and TEC 2004-1237/MIC.
dc.description.abstractWe present a study of the physical properties of TiO2 thin films deposited at 200 degrees C on Si by high pressure reactive sputtering, a nonconventional deposition method. Just after deposition, the TiO2 films were in situ annealed in the deposition chamber at temperatures between 600 and 900 degrees C in O-2 atmosphere. Morphological, compositional, structural and electrical characterization of the samples was performed by means of several techniques, including transmission electron microscopy, heavy-ion elastic recoil detection analysis, infrared spectroscopy, x-ray and electron diffraction and capacitance-voltage measurements. Microscopy images show that the TiO2 films are polycrystalline, and that a SiO2 film spontaneously grows at the TiO2/Si interface. The unannealed TiO2 films are oxygen rich, as shown by compositional measurements. By annealing this oxygen excess is released. For temperatures above 600 degrees C the TiO2 films are stoichiometric. Infrared spectroscopy and diffraction measurements show that as-deposited films are a mixture of anatase and rutile grains. During annealing there is a phase transformation, and at 900 degrees C the anatase phase disappears and only the rutile phase is found. The relative dielectric permittivity of the TiO2 film is calculated from capacitance-voltage measurements, and very high. values in the 88-102 range are obtained.
dc.description.departmentDepto. de Estructura de la Materia, Física Térmica y Electrónica
dc.description.facultyFac. de Ciencias Físicas
dc.description.refereedTRUE
dc.description.statuspub
dc.eprint.idhttps://eprints.ucm.es/id/eprint/26016
dc.identifier.doi10.1116/1.2056554
dc.identifier.issn0734-2101
dc.identifier.officialurlhttp://dx.doi.org/10.1116/1.2056554
dc.identifier.relatedurlhttp://scitation.aip.org
dc.identifier.urihttps://hdl.handle.net/20.500.14352/51114
dc.issue.number6
dc.journal.titleJournal of Vaccum Scuebce & Technology A
dc.page.final1530
dc.page.initial1523
dc.publisherAVS Amer. Inst. Physics
dc.rights.accessRightsmetadata only access
dc.subject.cdu537
dc.subject.keywordThin-Films
dc.subject.keywordTransport-Properties
dc.subject.keywordOptical-Properties
dc.subject.keywordInterfacial Layer
dc.subject.keywordGate Insulators
dc.subject.keywordHe+ Irradiation
dc.subject.keywordSilicon
dc.subject.keywordPlasma
dc.subject.keywordTitanium
dc.subject.keywordDeposition.
dc.subject.ucmElectricidad
dc.subject.ucmElectrónica (Física)
dc.subject.unesco2202.03 Electricidad
dc.titlePhysical properties of high pressure reactively sputtered TiO2
dc.typejournal article
dc.volume.number23
dspace.entity.typePublication
relation.isAuthorOfPublication6db57595-2258-46f1-9cff-ed8287511c84
relation.isAuthorOfPublicationa5ab602d-705f-4080-b4eb-53772168a203
relation.isAuthorOfPublication7a3a1475-b9cc-4071-a7d3-fbf68fe1dce0
relation.isAuthorOfPublication21e27519-52b3-488f-9a2a-b4851af89a71
relation.isAuthorOfPublication.latestForDiscoverya5ab602d-705f-4080-b4eb-53772168a203

Download

Collections